How do you spin and dry a washing machine? How to spin and dry a fully automatic washing machine

1.in the control panel of a fully automatic washing machine.

Find the power button and turn on the power of the washing machine.

2.Set the dehydration program, press the program button continuously, and select the washing machine program to the dehydration program. This way we set up the dehydration program, if we want to make the dehydration time longer, we can press and hold on the appointment time to make changes, but most of the washing machines automatically set the time is sufficient.

Then we click on the start pause button to start the washing machine program. The washing machine began to work on dehydration.

3.Pay attention not to open the lid of the automatic washing machine during the dehydration process to avoid the clothes being thrown out and hurting people, although the automatic washing machine has the function of opening the lid and automatically pausing, but just in case, waiting for the dehydration to be completed, the washing machine will automatically cut off the power to stop, and we can take out the clothes to dry!

4.If you need to move the washing machine, you can follow up the operation!

2. How to dehydrate a fully automatic washing machine - the working principle of a fully automatic washing machine.

1.The automatic washing machine is controlled by the water level switch and the electromagnetic water inlet valve to control the water intake, drainage and motor on/off: so as to achieve automatic control.

2.The solenoid water inlet valve plays the role of turning on and off the water source. When solenoid coils.

When the power is off, the moving iron core is tightly pressed against the rubber diaphragm under the action of gravity and spring force, and the small hole in the center of the diaphragm is blocked, so that the valve is closed and the water flow is blocked.

3.When the solenoid coil is energized, the moving core moves up under the magnetic force, leaves the diaphragm, and makes the center hole of the diaphragm open, so that the water above the diaphragm flows into the laundry bucket through the center hole.

4.Since the flow capacity of the central hole is greater than that of the holes on both sides of the diaphragm, the pressure above the diaphragm decreases rapidly, and the diaphragm will move up under the action of pressure difference, close the door and open it, and the water flow will be conducted.

Put the clothes in the washing machine.

Plug in the power of the washing machine and put the clothes waiting to dry in the washing machine. Press the "On" button.

Close the lid of the washing machine, press the "on" button, and the commonly used indicator light will be on. Dehydrate and spin dry.

Press the dehydration again, adjust the indicator to the expected time period, and the washing machine will start to dry the work. At the end of the scheduled time, the spinning work is completed.

Press the dehydration button. The use of single dehydration is to first plug in the power of the washing machine, and put the clothes waiting to be dried in the washing machine, close the lid of the washing machine, then adjust the function selection button of the washing machine to the dehydration setting, and finally press the start pause button to spin the clothes.

You are asking the function of the washing machine where to dehydrate and spin dry, there are many types of washing machines, the functional position is different, all you can operate according to the manual, and the principle of asking is to throw the water out of the bucket by centrifugal force! The faster the drum speed, the greater the centrifugal force, and the drier the clothes will be!

There is a spinning button on the washing machine, and when the spinning indicator light is on, the washing machine drains the water and rotates the contents of the washing machine, spinning at high speed to dry the contents.

Select the settings on the washing machine control panel for a separate "spin only" (single spin) dehydration program;

Put laundry that needs to be dehydrated into the washing machine drum;

Close the door of the washing machine;

Then press the start pause button of the washing machine, start the washing machine and wait for the dehydration to complete.

How to spin dry an automatic washing machine is as follows:Tools Raw materials: automatic washing machine.

1. Plug in the power of the washing machine.

2. Put down the drain pipe of the washing machine.

3. Press the power button to turn on the power of the washing machine.

4. Press the program button continuously to select the washing machine program to the dehydration program.

5. Then click the Start Pause button to start the washing machine.

6. Wait for the dehydration to be completed, the washing machine will automatically cut off the power to stop, and we can take out the clothes to dry.

Summary. Hello, glad to answer for you. Pro, automatic washing machine dehydration and spinning method; 1.Put the clothes to be dehydrated in the washing machine and close the lid of the washing machine; 2.Start the power button;

That's how it was flicked.

Hello, I'm glad to answer for you. Pro, automatic washing machine dehydration and spinning method; 1.Put the clothes to be dehydrated in the washing machine and close the slag lid of the washing machine; 2.Start the power button;

3.Press the [Washing Time] button one by one to turn off all the indicator lights in each gear; Then press the [Cleaning Selection] button one by one to extinguish the indicator lights of each stop and dismantling wheel; 4.Press the [Dehydration] button to select the dehydration time; After the dehydration is completed, the washing machine will sound a prompt to take out the clothes that leak Yutan Huitong;

Hope the above helps

Dear, I wish you a happy life and all the best <>

If your problem has been solved, you can click "End Crack Key Service" in the upper right corner and give 5 stars to get 1 consultation coupon. If you have no questions, you can leave a message or ask me a question again

The dehydration and spin-off function of an automatic washing machine is generally done automatically, and you only need to press the corresponding button or select the corresponding program. The specific steps are as follows:

1.Place the washed laundry in the washing machine, taking care not to exceed the machine's round wheel capacity.

2.Close the door of the washing machine and select the spin-off program, which is generally selected on the control panel of the washing machine.

3.According to the need to choose the speed of dehydration and spinning, there are generally three gears of Tongxin high, medium and low.

4.Press the start button and the washing machine will automatically spin and dry.

5.After the spinning is complete, open the washing machine door and take out the clothes.

It should be noted that when performing the dehydration and spinning operation, it is necessary to ensure that the clothes are evenly distributed in the washing machine to avoid heavy or unbalanced situations, so as not to affect the dehydration and spinning effect or damage the washing machine.

Summary. 1. How to dehydrate and dry a fully automatic washing machine 1. If it is a fully automatic washing machine at home, it is basically a lazy operation, we only need to plug in the power supply, directly put the washed clothes into the washing machine, and spread the clothes evenly and close the lid. Then set the time for dehydration, and press the button for dehydration.

Determine the time, press start, and the washing machine will start running. 2. After a period of time, if you set it to 10 minutes, the washing machine will make a dripping sound after 10 minutes, giving a hint, it means that it is time, the clothes have been dehydrated and dried, and they can be taken out to dry.

How to spin and dry a fully automatic washing machine

How to dehydrate a fully automatic washing machine 1. Put the clothes to be dehydrated in the washing machine and close the lid of the washing machine;

2. Start the power button; 3. Press the [Washing Time] button again and again to make the indicator lights of each gear all extinguished; Then press the [Cleaning Selection] button one by one to turn off all the indicators held by each stopper;

4. Press the [Dehydration] button to select the dehydration time; When the dehydration is complete, the washing machine will sound a beep to remove the clothes;

1. How to dehydrate and spin off the automatic washing machine for blind clothes 1. If it is a fully automatic washing machine at home, it is basically a lazy operation, we only need to plug in the power supply, directly put the washed clothes into the washing machine, and spread the clothes evenly, and close the lid widely. Then set the time for dehydration, and press the button for dehydration. Determine the time, press start, and the washing machine will start running.

2. After a period of time, if you set it to 10 minutes, the washing machine will make a dripping sound after 10 minutes, giving a hint, it means that it is time to be cautious, and the clothes have been dehydrated and dried, and they can be taken out to dry.

3. The current automatic washing machine is basically automatic slag cavity from the early stage of water discharge and washing to the later stage of dehydration. That is to say, there is no need to operate separately, we only need to select the mode of Biliangnai, and we can enter this program. When the time is up, it will automatically stop and we will be able to dry the clothes.

2. Which clothes can't be put into the washing machine to dry 1. Not all clothes can be put into the washing machine to turn on the dehydration and spinning mode, such as down jackets. If you put it in the washing machine, it is easy to have an accident during the spinning process, and it may happen**. Including the lid of the washing machine, it may also be swept away by the air waves, staring at the cherry blossoms and the down jacket has been damaged.

2. It is necessary to rotate quickly when entering the mode of dehydration and drying, but there is gas in the down jacket, which cannot be released, and the volume is getting larger and larger, which will lead to static electricity. When the accumulation reaches a certain level, it may lead to the occurrence of **. Therefore, it is possible that the stool or down jacket has a hint and cannot be spun dry separately in the washing machine.

Hope it helps, thank you <>

Summary. Hello, glad to answer for you. Pro, automatic washing machine dehydration and spinning method; 1.

Put the clothes to be dehydrated in the washing machine and close the lid of the washing machine; 2.Start the power button; 3.Press the [Washing Time] button one by one to turn off all the indicator lights in each gear; Then press the [Cleaning Selection] button one by one to extinguish all the indicator lights of each gear; 4.

Press the [Dehydration] button to select the dehydration time; When the dehydration is complete, the washing machine will sound a beep to remove the clothes; Hope the above helps

Hello, glad to answer for you. Pro, automatic washing machine volcanic dehydration and spinning method; 1.Put the clothes to be dehydrated in the washing machine and close the lid of the washing machine; 2.

Start the power button; 3.Press the [Washing Time] button one by one to extinguish all the lights indicating the stove in each gear; Then press the [Cleaning Selection] button one by one to extinguish all the indicator lights of each gear; 4.Press the [Dehydration] button to select the dehydration time; When the dehydration is complete, the washing machine will sound a beep to remove the clothes; Hope the above helps

Can you elaborate on that a little bit more?

Hello, glad to answer for you. Pro, automatic washing machine volcanic dehydration and spinning method; 1.Put the clothes to be dehydrated in the washing machine and close the lid of the washing machine; 2.

Start the power button; 3.Press the [Washing Time] button one by one to extinguish all the lights indicating the stove in each gear; Then press the [Cleaning Selection] button one by one to extinguish all the indicator lights of each gear; 4.Press the [Dehydration] button to select the dehydration time; When the dehydration is complete, the washing machine will sound a beep to remove the clothes; Hope the above helps