How do you make cashmere coats, and how do you make wool into clothing fabrics?

1. The raw material of the double-sided cashmere coat must be the fabric of the double-sided cashmere. That is, both sides are cashmere, which is different from the general single-sided cashmere.

2. It needs to be sewn by hand.

Key points of manual sewing: split-seam splicing method according to the sewing of the sewing head twice the width of the splicing part of the seam, splicing two pieces of clothing need to be peeled, and then according to the specified width of the seam, one of the layers of the stitch is sliced, split, in the other layer of the seam cut off centimeters, the purpose is to make the seam head form a gradient, along the thread buckle ironing neatly, and finally by hand to make a needle, the seam is sewn. If style threads are required, they can also be threaded at the seams.

Inverted seam splicing method This splicing only needs to peel off one side of the seam, which side of the seam is reversed, and the width of the seam is the width of the seam head + cm. Then the front of the two pieces of clothing is opposite, lift off the side of the seam, according to the specified width of the spell, hot down the seam to the side of the peel, buckle the upper seam to press the thread, and finally use the hand to make a needle, the seam is sewn well, if the style line is needed, you can also catch the bright thread at the seam.

Overlock splicing method Overlock splicing method is slightly different from others, peeling off the side seam head should leave an extra 1 cm, and then cut off one layer 1 cm wide.

Then put the two pieces facing each other and put them together according to the specified width. Scald down the seam to the peeling side, press the upper seam at the centimeter button, and finally catch the centimeter topstitch.

If you want to make your own cashmere coat, you must first know how to cut some of your own size before you can sew it yourself.

Summary. If you want to make a garment, you must first spin it into yarn, then weave the yarn into the fabric edge, and then sew the fabric edge together to make the garment.

1. In the wool washing process, the oil wool (containing oil and impurities) cut from the sheep is removed from the fat and impurities through the wool washing machine, and finally dried to become washed wool.

2. In the strip-making process, the washed wool is combed into strip-shaped wool strips, after the wool is washed and the crude oil is added, it is first fed into the carding machine, and the carding machine is to comb the weeds in the wool down, comb the washed wool into a net, and the net-like wool will be rolled into strips through the bell mouth, and the strips will be wound into balls, and then through the combing and weeding process, the wool fibers will be combed straight, and the impurities will be removed more thoroughly, and finally the strip-shaped wool will be packed into balls and sent to the next process.

How is wool made into clothing fabric?

If you want to make wool into clothes, you must first spin it into yarn, then weave the yarn into fabric edges, and then sew the fabric with closed edges to make garments. 1. In the wool washing process, the oil wool (containing oil and impurities) cut from the sheep is removed from the fat and impurities through the wool washing machine, and finally dried to become washed wool. 2. Strip-making process, the washed wool will be combed into strip-shaped wool strips, after washing the wool and crude oil, first feed into the carding machine, the carding machine is to comb the weeds in the wool down, comb the washed wool into a net, through the bell mouth to make the mesh wool out into strips, the strips into a ball, and then through the combing and weeding process, the wool fiber comb stove which straightened out, the impurities are removed more thoroughly, and finally the strip-shaped wool is packed into a ball, and sent to the next sedan chair to defend the rock road process.

Hello, this step can be dyed first, or spun into a thread and then dyed, at this time you can be the front of the hair no ball, through the comb, spinning, the wool strip stretching (elongated and thin), while twisting (twisting the thread), through such a process, the thread from the beginning of the thinner and thinner, through twisting more and more strong, the ultimatum will be spun into the thread, stranded into a real wool. It is necessary to sort out the wool of similar colors little by little, close to the white ones together, the lighter ones together, and the darker ones together. Divide the withered and sleepy, and then according to the need, the corresponding color of wool is scattered, mixed, and spun to form a wool fabric of the primary color.

1. Sew a line on the edge of the cloth, and adjust the stitch distance to the maximum, because this line is to be removed. The function of this line is to define the boundaries of the stripping edges.

2. Peel off one end and see the white pair of sutures between the two layers.

3. The white pair of stitches in the hand must be removed so that the cloth edge can be separated.

4. After the fabric is cut, the edges of some pieces of clothing are vertically grained, and the vertical lines are picked up with a thread remover.

5. Remove the pair of seams, and pay attention to the position of the seam line.

6. The effect after peeling is like this, iron with an electric iron, and separate the cloth edges on both sides.

7. The cloth edge of the horizontal stripe road can be picked up directly with a thread remover, and it is also the position of the sewing line.

8. The effect of stripping the cloth edge of the horizontal stripe road, the white pair of seams can be cut off or not. The same should be ironed separately.

9. Fold the cloth edges on both sides of the peeled in half, fix them with bead needles, and sew them with Tibetan needles. When hiding the needle, you should pay attention to the upper and lower layers of the line, do not walk the oblique needle, the oblique needle stitch is more obvious, can not play the effect of hiding the needle.

10. Use a thread remover to remove the thread that began to be sewn at the edge of the cloth, so that the sewing of the edge of the cloth is completed.

11. Prepare the suture of the two pieces of clothing.

12. The arrow refers to a piece that has not been peeled off the edge of the cloth, and only one of the pieces needs to be peeled off when the two pieces of clothing are sewn. The front blue pair of hidden ants destroys the cloth edge, ready to be sewn.

13. The blue cloth edge is wide, and a line is sewn in the middle, the color of this line must be consistent with the blue on the front, and the stitch distance is adjusted shorter. The width of the yellow 1 above the sewing line is slightly less than 2.

14. After sewing, trim the sewn cloth edge, so that the width of 2 is slightly less than 1, and when the front 14 is 14, the 2 parts should be wider, because the stitching process can not be sewn so neatly, leaving it wider, and it can be used for the most trimming.

15. After 15 pruning, it is just right to make 1,2 flat and evenly matched for ironing.

16. Blanch the edge of the orange peeled cloth.

17. After ironing, fold the edge of 3 into it, fix it with a bead needle, or sew it with a hidden needle, so that the two pieces of clothing can be sewn together, and remove the sewing thread above. The bag, hand-edging, is quite flat.

Tools: Fleece, washing machine, warm water.

If there is a special shrinkage agent and softener is the best, you can ask for a little with the tailor-made cashmere sweater store, if not, it doesn't matter, wash it by hand twice, and rub it a few times more The velvet will naturally come out. Hand-knitted styles are generally thick, and they take more time to rub them.

If it is a factory, there is a special texturing process and texturing equipment.

If you own your home, you can use a hand-washed or front-loading washing machine that does little damage to cashmere. The lotion is mainly warm water at 30-40 degrees, and you can add cashmere liquid (professional cashmere liquid or ordinary neutral washing liquid, shampoo, etc., the amount of cashmere liquid is about 1% of the weight of cashmere sweater). The fluffing time is 5-8 minutes, including about 8 minutes with pure water and about 5 minutes with velvet agent.

There should be a professional fleece and softener as a gift.

It can't be processed by itself, and there is a special leather manufacturing factory to process it.

Here's why; 1. By level.

There are first layer of leather and second layer leather, of which the first layer of leather has full-grain leather and trim leather; There are two layers of leather for pigs and two layers of leather for cattle.

2. According to the manufacturing method.

"Genuine leather" is a common word in the leather goods market, and it is a customary term for natural leather to distinguish it from synthetic leather. In the consumer's mind, "leather" also has a non-false meaning. Animal leather is a natural leather, which is what we often call genuine leather.

It is a leather material made of various characteristics, strength, feel, color and pattern after animal (rawhide) is tanned and processed by the tannery, and is a necessary material for modern leather products.

The processing process of genuine leather animal leather is very complex, and dozens of processes are required to make finished leather: raw hides --- soaked in water--- defatted--- degreased--- dehaired--- soaked in alkali --- expanded--- dedusted--- softened--- pickled--- tanned--- layered--- sliced--- retanned--- neutralized--- dyed--- refueled--- filled--- dried--- finished--- finished --- finished. There are also many kinds of it, according to the material is generally common sheep leather, cow leather, horse leather, snake leather, pig leather, crocodile leather, etc., according to the performance can be divided into two layers of leather, whole grain leather, suede leather, modified surface leather, film leather, composite leather, finishing section leather, etc.

Among them, cowhide, sheepskin and pigskin are the three major types of leather used in tanning.

3. Regenerated skin.

The waste skins and leather scraps of various animals are crushed and processed by mixing chemical raw materials. Its surface processing technology is the same as that of genuine leather, embossed leather, and is characterized by neat skin edges, high utilization rate and low quality; However, the leather body is generally thicker and the strength is poor, so it is only suitable for making affordable briefcases, trolley bags, club sleeves and other stereotyped process products and affordable belts, and the fiber structure of the longitudinal section is uniform and consistent, and the coagulation effect of the liquid mixed fiber can be identified.

After all this is done, the garment can be cut. And when cutting, it is necessary to consider the color of the leather and the thickness of the surface texture, smooth and soft with the front placket and large sleeves, slightly inferior but similar in color to the back. Again, use the small sleeves.

Finally, it is the lining that uses the inner bag and small accessories the last. Only in this way can we maximize the use of leather, do not waste, and minimize the cost of the budget.

Sheepskin jargon is called "cooked skin", and the process is very complicated. Remove the fish, remove the grease, and the skin of the clothes is made after the soft film.

There are masters in the people, and they can do it themselves.

If you have wool at home, you can only make clothes by hand.

Sorting wool to remove impurities.

Wash the hair and let it dry.

The wool is combed in one direction with a comb and then twisted by hand to form a thread.

It is also possible to twist two lines into one.

Then knit a sweater.

Now there are also small machines that can replace some of these steps.

I hope my answer is helpful to you.