How to distinguish the quality of solid wood flooring?

Preface: Nowadays, when making home decoration, most people will consider that the room wants to be made of solid wood flooring. When buying solid wood flooring, because it is a layman, I don't know how to distinguish between good and bad solid wood flooring, and most people will choose to judge the quality of solid wood flooring by weight.

It is believed that heavier solid wood flooring is the best, but heavy is definitely not one of the main measures of whether solid wood flooring is good or bad. Due to the different environments and regions in which the wood grows, the density of the solid wood floor will also be different. <>

When decorating at home, you will choose to put solid wood flooring in the room, because solid wood flooring has become more popular in recent years. When choosing solid wood flooring, it is also taken into account that the weather is relatively cold in winter, and with solid wood flooring, children can walk barefoot on solid wood flooring. The warmth effect is better than that of tiles, if the home is tiled, in the winter barefoot will feel colder, so most people will choose solid wood flooring when considering the room tiling.

When buying solid wood flooring, most people first look at the weight of solid wood flooring, thinking that heavier solid wood flooring is definitely the best. I think that such solid wood floors are made of pure wood, but I don't know that there are some unscrupulous manufacturers who deliberately brush the solid wood floor with a layer of paint when selling solid wood flooring. Especially for the low-end solid wood floor, a layer of paint is brushed on the surface to make the solid wood floor look more shiny, and it is just to cover up the flaws on the wood of the solid wood floor.

When buying solid wood flooring, you must check in many ways to understand the degree of corrosion resistance and texture of solid wood flooring, as well as whether the appearance is beautiful. When buying hardwood flooring, be sure to check the corrosion resistance of the hardwood floor, which is now used with very little water. If there are children in the house, it is easy to sprinkle water on the wooden floor, which can easily cause the wooden floor to bulge.

1. Look at the texture of the solid wood floor can directly distinguish the quality of the floor, in general, the regular texture is very beautiful and generous, such as with the crystal floor paint, it will be very beautiful after completion, therefore, do not choose those textures of the disorganized or inverted floor. 2. Look at the color difference of the solid wood floor can also judge the quality of the slate, and the color difference of the solid wood floor will not be very large, which is within the range of people's acceptance, and basically cannot see how much difference there is after the laying is completed. 3. Look at cracks Like some high-end solid wood floors, cracks are generally not allowed, but this kind of floor is not something that ordinary consumers can buy.

It's inevitable that there will be cracks in the mid- and low-grade floors, but it's not good if it's too big. Some cracks arise between the grain of the wood, and these cracks do not extend. Generally, there is no major problem, so you can use it with confidence.

However, some cracks are penetrating to the texture, so never use this kind of flooring, because these cracks will extend and have a great negative impact on the future.

It is necessary to look at the luster of the solid wood floor, whether the solid wood floor has any peculiar smell, whether the solid wood floor has a certificate, the color of the solid wood floor, and some details of the solid wood floor can distinguish whether the solid wood floor is good.

You can knock on it, if the sound is more dull, then the solid wood floor is good, if the sound is crisper, then it is bad.

You can hear it by listening to the sound, if the sound is crisp, it is good, but if it makes a dull sound, it is definitely not good, and then look at the gloss of the surface, if it is smooth, it is also a good effect.

You can look at the quality, color, pattern, price, material, and manufacturer of the floor, and distinguish them from these aspects.

Solid wood floor is a decoration material used more in recent years, mainly because the solid wood floor is beautiful, durable, comfortable, and cheap, simple construction, so the daily home decoration of the floor is not only a floor tile, laying wood floor has become a popular trend.

How to distinguish the advantages and disadvantages of solid wood flooring.

1. Smell the smell.

Parquet with a good base material will give off a woody fragrance. And the parquet with a bad base material will emit a strong pungent odor. The reporter randomly picked up two pieces of wooden flooring and put them in front of his nose, and the pungent smell of one of them made the reporter immediately frown.

Consumers may wish to smell the smell of the floor when purchasing, and do not buy inferior flooring.

2. Weigh the weight.

Good parquet has a higher density, a fine and uniform texture in the cross-section, and small and compact particles. Poor quality parquet with large and sparse cross-section and an extremely rough surface. Then use your hands to weigh its weight, a good parquet is densely densified by virtual beams, and the feel is relatively heavy.

3. Look at the wood grain.

The high-grade parquet has a high grain definition, the décor is more realistic, and even the wood grain scars and grain details are almost the same as real wood. The poor-quality wood floors are printed stiff and dull, and the texture is rough and blurred. Consumers can touch the surface of the wood floor with their hands, and a good parquet subverts the plane effect of the ordinary floor in terms of wood grain and touch, and the three-dimensional sense is stronger.

4. Look at the barcode.

For regular parquet flooring, the back of Huaihe floor will not only be printed with the brand's trademark, but also the model of the floor, the number of wear-resistant revolutions and the environmental protection level and other information, so that consumers can see at a glance.

Precautions for the installation of solid wood flooring.

1. The ground should be flat and dry.

2. The laid keel must be dried, and a layer of moisture-proof film is laid on the keel. If plywood is laid on the keel, the plywood surface should be coated with moisture-proof oil and then covered with a layer of moisture-proof film, and the interface should be stacked 20cm on top of each other and spread to 10cm above the foot of the wall.

3. During construction, a layer of moisture-proof film should be laid first, and the moisture-proof film interface should be stacked 20cm on top of each other, and the moisture-proof film should be spread 10cm above the foot of the wall.

4. When installing the floor, there must be a gap between the floor in East China, South China and some particularly humid areas, so as not to arch the floor when the floor is damp in the wet season; In the northeast, northwest and some particularly dry areas, it is better to have a natural combination between the floor, and there should be a gap of 6-8mm between the floor and the wall.

5. If the splint with a thickness of 9mm-15mm is directly used, a gap of 20mm should be left between the splint and the splint or the splint should be sawn into 60cm+120cm. and fixed on the concrete floor. 6. After the floor installation is completed, fill the floor gaps with caulk, and wipe the surface with floor wax to make the surface more smooth and translucent.

The material and quality of solid wood flooring are the key factors that determine its quality, and in general, it can be distinguished from the following aspects:

Raw materials. The raw material of solid wood flooring is usually natural wood, and the wood used for solid wood flooring is usually high-quality hardwood, such as oak, birch, beech, etc. Low-quality hardwood flooring may be made of inferior cork or composite materials.

Paint coating. The paint coating of solid wood flooring can effectively protect the floor from pollution and damage, and also has a great impact on the quality of the floor. Generally speaking, the paint coating of a good solid wood floor should be uniform, not easy to peel off and peel off.

Manufacturing process. Good solid wood flooring has advanced manufacturing technology, and attention will be paid to details in the production process, such as strengthening the compactness, solidity, surface flatness and gloss of the floor.

Brand reputation. Some well-known solid wood flooring brands have better product quality and good reputation and market credibility due to technology, technology, quality and other reasons.

Recommend some more reliable solid wood flooring brands, such as red beans, holy elephants, Del flooring, Yangtze River flooring, etc. These brands have a good market reputation and user reputation in the field of solid wood locust boards, and they can choose the flooring material and style that suits them. However, it should be noted that the brand is not the only factor, and when buying solid wood flooring, you should also consider your own needs, budget and environment to choose the most suitable solid wood flooring products.

Wood flooring has the advantages of comfortable feet and natural texture, and has become the preferred material for ground banquet decoration. However, even if the high-end wood floor is not in harmony with the color of the home, it is a waste. So, let's introduce the skills of buying wood flooring and how to distinguish between good and bad liquid silver for wood flooring.

Tips for buying wood flooring.

1. Specifications. In terms of specifications, the smaller the size of the wood floor, the better the resistance to deformation, because the narrow wood floor can minimize the bending, twisting, scooping, shrinking, arching and other phenomena of the wood floor. Some experts believe that the short one is better than the long one, the narrow one is better than the wide, and the price is good.

2. Moisture content.

The moisture content of the wood floor will affect the deformation of the floor, so the moisture content of the wood floor must be similar to the local equilibrium moisture content. When purchasing, you can ask the salesperson to measure the moisture content of the wood floor.

3. Machining accuracy.

You can use several pieces of wooden flooring to assemble on the flat ground, and then use your hands and eyes to observe whether the processing accuracy of the wooden floor is flat, smooth, and whether the groove bite is appropriate.

How to distinguish between good and bad wooden floors.

1. External beauty and inner beauty are unified.

When choosing wood flooring, consider color and practicality. Generally, the expansion of wood flooring after absorption sounds like a shortcoming, but it is scientific, the expansion rate of wood flooring after water absorption is within 3% is qualified, and the wood floor will be deformed in a humid environment, which will affect the normal use of wood flooring.

2. The choice of wood floor thickness.

At present, the thickness of the wood floor on the market is generally 6-12mm, and the important factor that determines the life of the wood floor lies in the quality of the wood floor surface.

3. It's not that the "embossed" floor is more wear-resistant.

Now there are a lot of "embossed" wooden floors on the market, and many "embossed" floors are useless, the carving on the surface will greatly reduce the wear resistance of the wooden floor, reduce the processing accuracy, easy to hide dirt and dirt, and will greatly reduce the quality of use.