Can the floor tiles of the newly renovated new house have cracks?

There are many people who will put floor tiles on the ground in the process of decorating the house, which can also facilitate people's better living and bring people a good visual sense. But some people find that the floor tiles of their home have cracks after pasting them, and they can't understand it at this time. There are many people who say that this practice is very bad, so they also found a relevant master to reason.

In fact, this practice can also be well avoided and solved, sometimes the master can use the white powder to make up the cracked floor tiles, and then apply a layer of paraffin, it can appear crystal clear. <>

Cracks in floor tiles can be remedied in time, and many people feel that cracks in floor tiles are not a good phenomenon, and they are not able to accept such a practice. Therefore, many people think that the craftsmanship of some masters is not very good, and then it leads to this phenomenon. This is also to hope that people will not speculate too much about anything, and sometimes people do not want to see such practices, so people can also choose the corresponding means to remedy in time.

This is also a good way to avoid some things, otherwise it will be easy to cause some bad situations. <>

Reasonable view of the cracks in the floor tiles, sometimes the cracks in the floor tiles, this is also the hope that people can pay good attention to and treat. As long as you find a master to repair these floor tiles, this situation can be well avoided. So people don't need to worry too much about anything, and that's a very bad thing.

I hope that everyone can also be reasonable to look at some conditions, sometimes the floor tiles have cracks, it does not mean that people's craftsmanship is not very good. <>

There is no need to abuse the cracks in the floor tiles too much, which is also because the master did not use too many materials when laying tiles. Then it led to a vacancy in the middle of that floor tile, so there was such a crack. As long as the relevant masters use small methods and small means to fix it, then it can be well avoided.

Therefore, people should also look at this phenomenon reasonably, and there is no need to abuse anything too much if there are cracks in the floor tiles.

Yes, the current technology is still very high, so it can basically be repaired. Don't worry too much.

This can be repaired, you can choose some filling methods, so you won't be able to see it, and the effect is also very good-looking.

If it can be repaired, you can go outside and find a professional to come to your home to repair your new house, so that the floor tiles look more beautiful.

It can also be repaired, because this floor tile has not been used yet, in fact, it is still relatively easy to repair, and if it doesn't work, it will be replaced.

Of course, it can be repaired, you can find a professional renovation team to repair it, and you must solve this problem before renovating.

The solution of the bottom layer is very important to put it bluntly, the bottom layer, in fact, the wall and the pavement, there are some employees in the case of gradually paving the tile, the bottom layer of the oil stains, the ash layer, etc., do not do the solution, the tile can be tightly integrated with the wall.

There is also a situation that the wall may be hollow in the first place, and the bottom layer must be solved before the tiles can be gradually paved. This is the easiest to cause mutual conflict, and when the construction of the project comes to an end, you find that the drum is hollow, and the staff says that your wall is not very good, and I will not carry the pot of the hollow drum.

The cohesiveness of the mixed mortar comes from the smooth chemicals generated by the concrete and water, so the water is very critical. The water absorption of many tiles is extremely strong, in order to better prevent the tiles from pumping out the water in the mixed mortar, the tiles must first be fully drunk.

During the construction process, it is very likely that some employees will immediately use water pipes to pour the tiles, or the tiles will not enter enough, which is all lazy. Naturally, not all bricks must be soaked in water, and tiles with water absorption less than 1% do not need to be soaked in water.

Wall tiles are paved with wall tiles first, or floor tiles first? According to the specific steps and technological process of the construction work, after the first lane, the top of the wall, the wall and then the ground, the bricks of the wall should be paved first. Besides, if you stick the floor tiles first, the floor tiles are paved, and you will have to wait for a while before you can gradually lay the wall tiles, and time is money.

And first paste the floor tiles, until the case of sticking wall tiles, it is inevitable that there will be items falling on the ground, scratching the tiles, it is not easy to do environmental sanitation is a trivial matter, blocking the odor-proof floor drain is troublesome. Nowadays, the standard construction technique of throwing glazed brick wall, throwing glazed brick or throwing glazed brick wall is thin paste. In fact, it is not recommended to put floor tiles on the wall, in the specific operation process, if there is a non-standard engineering construction, it is also a very cumbersome matter to solve the problem of thin stickers.

And first paste the floor tiles, until the case of sticking wall tiles, it is inevitable that there will be items falling on the ground, scratching the tiles, it is not easy to do environmental sanitation is a trivial matter, blocking the odor-proof floor drain is troublesome. Nowadays, the standard construction technique of throwing glazed brick wall, throwing glazed brick or throwing glazed brick wall is thin paste. In fact, it is not recommended to put floor tiles on the wall, in the specific operation process, if there is a non-standard engineering construction, it is also a very cumbersome matter to solve the problem of thin stickers.

You can contact the tile installer and ask them to come and renovate it, there will definitely be leftover tiles when you install the house, and they will have a way.

The tiles should be replaced, and then find the original decoration company, let them solve this matter, under normal circumstances, it will not just be decorated like this, you need to let them see that there is a problem.

Find a construction team and have them do after-sales repairs so that you can solve the problem at the root cause and it will also reduce your losses.

There is no need to be responsible.

1. Some small cracks on the tile generally do not affect the use, so in order not to blacken these cracks and become ugly, we need to deal with the cracks as soon as possible, and buy a professional tile grout to add the joint, which is troublesome and wasteful, and the use of glass glue to add the seam is too technical.

2. In fact, you can use toothpaste to repair these cracks, gently squeeze out some toothpaste, and use your fingers to evenly apply the toothpaste to the cracks. Gently wipe off any excess toothpaste around you with a cloth or paper towel.

When it dries, the tile wall is like new, if the tile is colored, buy the toothpaste of the corresponding color, or mix gouache paint in white toothpaste, and the effect of applying the tile gaps is just as good.

3. If it is serious, the solution to tile cracking can only be to change the tile, but the treatment method is not complicated, as long as the cracked floor tiles are pried up, the ground base is removed, and then the bricks are laid with cement and yellow sand, and the construction party can be found to solve the problem.

Kiss! Hello, happy to answer your <>

The solutions to the cracks in the tiles of the newly renovated house are as follows: 1. The cracks can be covered with tile paste for cracking repair. For the first time, users with high requirements often use tile paste as caulk, which can produce almost the same smooth visual effect as the tile surface, and is available in multiple colors, hard and wear-resistant, so it can also be used to repair obvious cracks and play a role in disguise.

2. If the hard object is damaged, use toner to make up for the problem of scratches caused by the hard object knocking the surface of the tile, if you think it is troublesome to change the brick or you can't find the same style of tile, you can use marble glue reinforcing agent, adjust the toner to a close color, fill in the vacancy on the porcelain surface, and polish and polish it after hardening, but this practice may lead to different degrees of color difference. 3. Cracks in floor tiles are recommended to be chiseled and pasted if the bricks are so damaged that cracks appear, it is recommended to replace the old bricks directly, be careful when chiseling bricks, it is recommended to ask professional workers, and then stick the same brick, so that the effect is the best. Second, tile cracking prevention measures 1, the hardness of the ceramic tile of the choice of brand products is directly related to the density, when purchasing, turn the brick over to see the back, the more delicate the particle of the tile density, the higher the hardness, the better the quality; You can sprinkle water on the back of the tile, if the water does not seep down and flows downward, it means that the tile is denser and harder; If water seeps down, it means that the tile is less dense and less hard.

2. Soak the tiles in advance and use cement mortar to pave the tiles (mainly referring to the wall tiles), and the tiles need to be soaked in water for about two hours in advance. The higher the density and quality of the bricks, the shorter the time it needs to be immersed in water. The thin paste method does not need to be soaked in water, and the proportion of the adhesive contained in the mortar used is larger, and the water retention is extremely strong.

3. Leaving a reserved joint tile and caulk will have thermal expansion and cold contraction, and appropriate gaps should be reserved when paving; Caulk is a flexible product with toughness and low strength, which makes up for the expansion coefficient of thermal expansion and cold contraction of ceramic tiles, and can avoid hollowing and cracking to a certain extent. Hope mine can help you <>

Do you have any other questions?

How to repair tile cracks:

Use tile caulk or waterproof glue to repair, for small tile cracks, you can also use toothpaste to repair, the operation is also very simple, and the visual effect is good. Of course, for professionals, tile paste can be used to repair cracks, the effect will be more obvious, and there will be no falling off, warping and other phenomena after repair.

How to buy tiles:

1. Weigh the tile components.

First of all, you can take a look at the thickness of the tile, the sintering of good quality tiles is fine and high, enough weight, and the weight of better quality tiles is relatively heavier. Secondly, look at whether the tile surface is flat. If the surface of each tile is uneven and crooked, no matter how good the master is, he will not be able to pave the good effect.

2. Look at the appearance of the tiles.

If the brightness of the tile surface is higher, the density of the tile is better. Good brand tiles, the surface has a bright feeling, shining under the light, and the pattern will not be lacking in color.

3. Listen to the sound to distinguish between good and bad.

The sound of the tile is crisp and good, which proves that the quality of the tile is very good, if the sound is mixed and dull, then the texture of the tile is poor, just like the way to distinguish glass and jade, in fact, the method is almost the same, the difference is that to distinguish glass and jade is to listen to its own sound.

4. Check the flatness.

Use two identical tiles stacked on top of each other, with the corners right, to see if there are any gaps and a mass that is not easy to turn. On the contrary, it is easy to rotate, and the quality is not good.

5. Observe the water absorption.

The size of the water absorption on the reverse side of the tile can reflect the texture of the tile. If the water on the reverse side of the tile disappears quickly, it means that the tile has a high water absorption rate. For ceramic tiles, the faster they absorb water, the weaker their strength.

On the contrary, the tile absorbs less water, and the slower it seeps, the better the quality of the sintering, and the poor brick not only seeps fast, but also is easy to deform and is not durable.

If it is a small crack, you can use tile plaster caulk. If the crack is relatively large, be sure to use marble glue and then add toner to repair it.

The cracked parts of the tile should be cleaned first, then the edges should be sanded and smoothed, patching paste should be added, then thoroughly dried, and finally dried.

If you find that there are many cracks in the tiles, you can go to the beautiful joints, so that the tiles can be good-looking, and there are no cracks, and it will also make the home go to a higher level.

Abstract Hello, there are many reasons for tile cracking, it may be that the wall cracking drives the tile cracking, or it may be that the quality of the tile itself is not good.

The most likely reason is that the ratio of cement mortar is not suitable, and the tile is cracked by the strong tensile force of cement mortar.

What is the problem of cracking the wall tiles of the newly renovated house.

Hello, there are many reasons for tile cracking, it may be that the wall cracks and the tile cracks, or it may be that the quality of the tile itself is not good. The most likely reason is that the ratio of cement mortar is not suitable, and the tile is cracked by the strong tensile force of cement mortar.

My family built a brick wall in the first half of the year, and now it has just been approved, and the 4 corners of the exterior wall can be fed back to the property company by cracking at the bottom of the beam.

It should be that the ratio of cement mortar is not suitable, and it will be like this in the later stage.

I built it myself.

I see

I made the walls with cement and stone powder.

Didn't you add some sand.

Gagosha, how can the master fix it?

Use tile paste as caulk to repair, the general large building materials market can be both, tell the merchant the cracking condition of your home, he will know what to give you.