The new Omega Butterfly Flywheel watch is 40 minutes faster at the end of the day when the first day

Hello Magnetic fields are everywhere, it is impossible to prevent it, and the watch that has always been very accurate in the time has suddenly appeared, and the first thing to guess is whether the watch is magnetized.

There are many steel materials in mechanical watches, such as large and small steel wheels, escape wheels, shaft tenons of gears, bearings, screws and hairsprings, so watches are very susceptible to magnetization. Once the mechanical watch is magnetized, the first situation that affects it is that the watch is not accurate, there is an error, and in the serious case, the watch stops.

It may be that the watch is magnetized or the power is insufficient. Once the magnetism on the watch is all of a sudden, it goes very fast, even 1-2 hours a day. When wearing mechanical watches, pay attention to keep away from magnetic fields, such as stereos, televisions, mobile phones and other electrical appliances.

Magnetization is a common phenomenon nowadays, and the solution is not difficult, just go to the watch for repair and demagnetization, or bring your own demagnetizer, it only takes 30 seconds to demagnetize the watch, and there is no impact on the performance of the watch.

For Omega watch brands, it's definitely problematic to travel 40 minutes faster in a day. This can be caused by magnetism, etc., or it may be caused by a malfunction in the movement. It is recommended to take it to a professional OMEGA service center for overhaul.

1. If the watch has been worn for a long time may be the cause of the accumulated dust, you can go to the watch store and ask the master to clean the movement, which may be more expensive.

2. The speed of a mechanical watch is related to the environment of daily wear, such as temperature, winding strength, usual angle and so on. It is said that when not in use, the front side and the back side are not the same, so it is more particular.

3. The instantaneous error range of automatic mechanical watch I type (men's watch) is: -20 +30 seconds per 24 hours for excellent products; First-class error per 24 hours -30 +60 seconds; The error of the qualified product is -50 +90 seconds per 24 hours. The average duration of the continuation is greater than or equal to 36 hours.

The instantaneous error range of automatic watch type II (medium-sized watch) is: -25 +50 seconds per 24 hours for excellent products; First-class error per 24 hours -40 +80 seconds; The error of the qualified product is -60 +120 seconds per 24 hours. The average duration of the continuation is greater than or equal to 30 hours.

The instantaneous error range of automatic mechanical watch type III (Kun watch) is: -30 +70 seconds per 24 hours for excellent products; First-class error per 24 hours -50 +100 seconds; The error of the qualified product is -70 +150 seconds per 24 hours. The duration of the continuation is greater than or equal to 28 hours.

If there is a lot of difference every day, then it is not normal, do degaussing first to see if it is magnetized.

4. If the time is not long, it may be a problem with the setting of the watch, there is a small needle that can be adjusted in the movement, and you can adjust it when you go to the watch shop, before that, you only need to calibrate the time of the watch one day in advance, how long is it slow, tell the watch repairer to adjust it, a day fast or slow within 30 seconds is a national standard, not a quality problem.

5. If it is a new watch, you can find a merchant to return it.

The Omega de Ville series is a mechanical watch, and there will be errors if it is a mechanical watch, it may be that you often do not bring the watch, and the strings in the watch are not on, so you must often wind it or wear it for a long time. If it still doesn't work, I recommend that you calibrate, I'm just selling watches, and I hope to adopt @@@

It should be normal, Dad used to have one, and it was also occasionally slow, and then I went to the counter to ask, and said it was normal, and I forgot the specific explanation, you can go to the counter and ask! And if there is a quality problem, it will be guaranteed within one year!

Count the quality problem, go directly to the Omega repair station and let them check it for you.

It's definitely a quality issue. It should be possible to change. The error should not exceed 15 seconds in a month.

There is no damage to the watch.

Omega (Omega) three-hand automatic watch time adjustment method:

1. The watch handle is pulled out of the second gear, which is to adjust the time.

2. Do not adjust the time and watch functions during the time period from 23:00 to 5:00 in the morning, so as not to damage the Omega watch mechanism.

3. The watch handle is wound up in the state of not pulling out, and the new omega watch or long-standing watch is recommended to wind about 30 times, so as to reserve some power for the watch, so as to avoid pause or inaccurate timing caused by insufficient activity.

4. Pull out a gear from the watch handle, which is to adjust the date, 1-31 days, if you encounter a month with only 30 days, you must manually adjust the 31st. (Note that the calendar is adjusted at 12 o'clock in the evening, if the calendar is adjusted during the day, you can manually rotate the time by 12 hours).

Omega watch five-hand automatic watch time adjustment method:

1. The watch handle is pulled out of the second gear, which is to adjust the time.

2. The upper right button of the Omega watch is to adjust the week, and the subdial display at 9 o'clock in the dial.

3. The lower right button of the watch is to adjust the month, and the subdial display at 3 o'clock in the dial.

4. Do not adjust the time and function of the Omega watch between 23:00 and 5:00 in the morning, so as not to damage the mechanism.

5. The watch handle is wound up in the state of not being pulled out, and the new Omega watch or the long-standing watch is recommended to wind about 30 times, so as to reserve some power for the Omega watch, so as to avoid pause or inaccurate timing caused by insufficient activity.

6. The watch handle is pulled out of a gear, which is to adjust the date, 1-31 days, if there is only a 30-day month, you must manually adjust the 31st. (Note that the calendar is adjusted at 12 o'clock in the evening, if the calendar is adjusted during the day, you can manually rotate the time by 12 hours).

Hold the watch in your left hand, with the dial facing you and the 12 o'clock position facing up, and turn the crown with your right hand, and the crown needs to be pulled out, which is divided into two positions (please note the force).

1st gear (slightly pulled): Thumbs up to rotate the crown (clockwise) - Adjust the date Thumbs down to rotate the crown (counterclockwise) - Adjust Tuesday gear (fully pulled): Thumb to rotate the crown --- Adjust time precautions.

It is not advisable to manually adjust the watch between 9 o'clock and 3 o'clock.

Because this period is the running time of the calendar function, manually adjusting the watch is easy to cause gear damage, so avoid this time, and wait for the calendar to jump before manually adjusting the watch, otherwise it will cause wear and tear on your watch.

Suggestion: Adjust the calendar to the previous day, pull out the crown to the second position (fully unplugged), rotate the crown all the way up (clockwise), wait for 24 hours after the clock hand turns the calendar to automatically jump to the correct date, and then continue to adjust the correct time today.

This is a normal phenomenon, because mechanical watches are mostly mechanical components for meshing, and your practice of transferring time has no effect on any watch, this is the function of the watch, as long as the back cover of the watch is not opened, there is no problem, as for the slow jump phenomenon is also very normal, no matter how expensive the watch, this kind of problem may occur, please don't worry.

ps: Please do not put your watch in the drawer without it, which may cause some lubrication and meshing problems to the watch, as long as you don't collide with hard things in your daily life, try not to immerse yourself in water, don't throw it all over the ground, then there is generally no problem.

Once in a while, there is no damage to the watch, just pay attention next time, and at the same time, the watch date slow jump is also a normal operation, don't worry too much.

Does Omega still have this problem? My Broken Sky Shuttle is the same, and I personally think it's too full of strings.

Seeing that you have explained the general situation of the watch, it may be that there is a mechanical error in the hammer swing mechanism of the watch, which causes the upper wheel train to be unable to store energy, and it is prone to good and bad failures. Specifically, it is necessary to wait for the appraisal results to be conclusive. The words of the master of the watch shop were also groundless and deceitful.

According to him, this kind of merging watch itself has defects, should not be on the market, it is recommended that you go to the after-sales service department to solve the problem. Whether it is a repair or a return (depreciation will be deducted for the return), as long as it can meet your wishes.

The coaxial movement does have a situation of stealing stop, it is said that the first generation of the coaxial movement has a defect in the design, but the probability is very small, you still send it to the Li Bend office, if it is a problem with the escapement system, the office will give you a free solution, after the repair, you keep the maintenance order will continue to be for you to warrant.

The domestic counter** is RMB 25,300

Only open the lid to check the movement***, this one uses a 2500 coaxial movement, and it is relatively easy to distinguish the authenticity.

How is it illegal?

You adjust the time to observe the walking time after the beam is right.

Mechanical watch errors are within the normal range of -30 seconds and +45 seconds per day.

For example, the first day was 20 seconds faster, and the second day was 40 seconds faster. On the third day, it was 1 minute faster.

If so, it falls within the prescribed range.

In this case, there is no need to fix it. Because nothing went wrong. That's it for mechanical watches.

If you can't accept it, sell it and buy a quartz watch.

If there is a large difference in error, it means that there is a problem.

You can directly take the insurance card to the after-sales service center for maintenance.

There are three main reasons why mechanical watches are inaccurate.

1.Watch magnetization: The watch is in too much contact with items with magnetic fields, which leads to the phenomenon of magnetization of the watch, causing the watch to be inaccurate.

After being magnetized, the watch may stop, slow, or fast. After the watch is magnetized, its magnetism will not recede on its own, and it needs to be demagnetized to restore it to normal.

2.Lack of maintenance: If the watch lacks maintenance, it will lead to wear and tear of parts, dry up the sludge, affect the normal running time of the watch, and make the watch appear fast and slow.

3.Mechanical failures: Mechanical failures such as hand-penetrated hairspring failures, escapement system failures, and component slippage may cause the watch to be fast and slow.

Mechanical watches are sometimes fast and sometimes slow, and it may be caused by severe impacts, water ingress, etc. Quartz watches are generally very accurate and less prone to time failures. In the case of adequate maintenance, it is more likely to be fast and slow, than the circuit board failure has a wide digging pass, or a certain part of the contact is poor.

Omega Butterfly Watch Warranty Card Invoices are gone, but even if the watch is brand new, it will not reach the original price, because once the watch leaves the sales counter, it is second-hand. Generally speaking, the newer the color of the Omega watch, the higher its **** will naturally be, but the **** not only depends on the condition, but also looks at many other factors, and you need to see the actual watch to know. Generally, professional luxury **company**Omega watches** are between 2-8% off.