I just bought a Chopard watch in Thailand for a week, and it will be parked for a few hours and will

There are many reasons why a mechanical watch does not go or goes slowly, in addition to the lack of power, bumping or falling will not only make the watch slow or not go but also damage the internal movement of the watch; Or the watch has not been cleaned in time due to water ingress, resulting in corrosion of parts in the future and rust and stopping. If the watch has the above situation, be sure to go to the watch service center for inspection and repair in time to avoid irreparable losses.

Watch suspension: Anyone who knows a little about mechanical watches knows that fully automatic mechanical watches are wound entirely by the swing of the arm.

Therefore, if the watch is left for too long or the amount of arm activity does not meet the requirements of the watch winding every day, the watch will cause the mainspring to be winding and the potential energy is insufficient, which will cause the watch to be unstable or stop when it is not worn at night.

If this happens, we can manually do an arc movement before the watch is placed. Or use the manual winding function to wind the watch. This keeps the watch with enough kinetic energy storage to keep it running until the next day.

Reason for watch stealing:

1. If the watch is placed for too long or the daily arm activity does not meet the requirements of the watch winding, the watch will cause the mainspring to be insufficient due to winding, which will cause the watch to be unstable or stop when not worn at night.

2. Accidentally knocking or falling on the watch in daily use will also lead to the theft of the mechanical watch.

3. The failure of the hairspring is also one of the reasons for the stealing of the mechanical watch when it is running normally.

Reason for stopping:

The more common reason may be the lack of kinetic energy, automatic mechanical watches do not need to be manually wound, but to keep the mechanical watch on the hand to wear at least 8 hours of time, because the automatic mechanical watch uses the arbitrary swing of the rotor to wind up, and the rotor swings with the movement of the arm, so if the mechanical watch needs to be worn on the hand often.

But if you often wear it on your hand and don't walk, it may also be a lack of kinetic energy, and then we need to manually wind it.

After the above methods, the machine is not gone, here we can rule out the reason for the lack of kinetic energy of the mechanical watch, it should be the failure of the mechanical watch, if you are not a watch professional, it is best not to disassemble it rashly, please send it to a professional watch repairer for repair.

Our mechanical watches often have the situation that the time is not accurate, and most people wonder if the mechanical watch is broken. There are many reasons why a mechanical watch can be parked, but there are several main reasons.

1. Insufficient kinetic energy: The watch is not winded enough, and the kinetic energy is insufficient. In particular, automatic watches require more arm movement, and the winding efficiency is very low. If you usually exercise a little bit, you can wind it manually, which can ensure enough kinetic energy.

2. Gear failure: Gear train failure such as deviation wheel and center wheel failure will lead to the condition of stealing stop of the watch. These situations are often not easy to detect and require disassembly, careful inspection and testing to find out the problem and solve the problem.

3. Lack of maintenance: mechanical watches should be maintained every 2-3 years or so. If it is not maintained for a long time, a large amount of oil sludge will be generated inside. Friction between gears increases, causing slippage.

There will be after-sales ** on your warranty link, call after-sales ** to inquire about the after-sales address.

If it's a mechanical watch, try it on the line.

Any watch worn must be serviced regularly to ensure the longevity of the watch. If you do not take care of your watch for a long time, it will cause great harm to the parts of the watch itself. It is best to return the watch to the factory every year to check for improper use or water ingress.

For example, perspiration and rainwater corrosion for a long time will cause frequent damage, so it is very important to check regularly.

The watch should be maintained every 1 to 4 years, replacing the waterproof components, checking the function of the time and the power consumption of the movement, cleaning the movement and maintaining the appearance. This kind of maintenance will effectively extend the service life of your mechanical watch.

There are many reasons for the watch to stop secretly, but in addition to malfunctions, there are also problems with wearing habits that lead to insufficient power and stop-and-go. There are also yes, first of all, make sure that you have enough time to wear it every day, see if this situation will happen, and don't take it off and put it on the table as soon as you get to the office or when you get home.

If you ensure at least 7-8 hours of wearing time every day, there will still be a sneak stop, then it may be because the watch needs to be washed, of course, the watch you just bought generally does not say that you need to maintain the oil immediately, but it is possible that the watch you bought is in the counter for a long time, and some of the watches that are pressed in stock may be placed in the counter for a long time, if the counter has not been sold, put the watch for several years, because the internal lubricating oil is naturally aging, it is also necessary to wash the oil, Of course, this situation is very rare, because after all, it will not go away if you put it there, but it will not age so quickly if you put the lubricating oil.

Stop, there may be the following reasons:

1. See if the crown is pulled out, the crown is pulled out, and the watch stops.

2. Whether the second hand touches the glass, there will be a circle mark on the glass.

3. Whether the three watch hands are not well balanced, causing contact and causing stopping.

4. Whether the battery is exhausted or not, it generally needs to be replaced in 1-2 years.

The reason for the watch to stop is bai:

Lack of kinetic energy, self-driving mechanical watch.

zhi is the use of the movement of the arm dao to complete the winding. If the inner watch is placed for too long or the amount of arm movement is less every day, the mainspring energy of the watch will be prone to inaccurate timing or night stop due to insufficient winding.

The hairspring is faulty, and the clockwork will be tighter if the amount of exercise is large. If there is a problem with the upper bar mechanism that causes insufficient power, it generally appears between 9 o'clock and 12 o'clock in the evening, "with a calendar function table" because at this time the hour wheel begins to drive the calendar wheel, and the load is large, if the power is insufficient, it is easy to stop during this time period. This time should not be reversed dial pin, now many mechanical watches use plastic parts of the calendar wheel, accidentally will break the gear, once the tooth is broken, every day at this time will be stuck, or to a fixed date will no longer jump.

As a result, the mechanical watch was stopped.

Bump failure, the watch is a precision instrument, once the bump receives a violent vibration, then the parts may fall off or damaged, you can make the watch steal stop.

Hello, the simple mechanical watch is winded, the mechanical watch does not go when the first consideration is not enough spring, as long as the spring is full.

Yes, the button on the edge of the mechanical gauge rotates clockwise on the button clockwork, there is a magnetic sound, usually 30 times it means that the spring is full;

There is a roulette wheel in the automatic mechanical watch, which is driven by the rotation of the human wrist, the user must wear it every time, and have a certain amount of wrist activity.

There is also the quality problem of the watch or the long-term use of the parts is not good, the movement needs to be re-cleaned and oiled, you can go to the mechanical watch maintenance center, find a professional maintenance person to solve.

Reasons why the watch doesn't go:

The main copy of the core gear dislocation, the watch magnetization, bumps, shelving for a long time, sludge dry and other problems. The most common reason for the failure of the watch not going is the lack of power of the watch and the movement of the watch does not work.

When the mechanical watch suddenly stops, the priority is to think about whether it is caused by lack of power. Hand-wound watches should be wound at the same time every day as much as possible so that the watch can operate with sufficient energy for the next 24 hours.

If the watch is used for a long time, then its wear and tear will be more serious, and the external maintenance of the watch will be easily damaged. It is necessary to regularly replace the watch you are wearing, and it is necessary to maintain the watch regularly, for the service life of your watch, it is better to maintain it regularly.

Hello, it may be a lack of motivation. If you need to wind a mechanical watch by hand.

Generally, the normal winding takes 30 times, and the return is basically full, (provided that you answer to the full) The winding watch on your hand actually doesn't matter, as long as you keep going up until you can't turn it, the clockwork is full.

For automatic watches, because most automatic watches can be wound by hand, especially when worn for the first time or after stopping, you need to start the winding with your hand first. (It is recommended that you do not rely on the rotor to wind the full string at the beginning) everyone also knows that because the automatic watch is "not up to the string", it is recommended that the number of winding times of the automatic watch should be more than less, and you may wish to put a few more, such as up to 40 times, it is basically guaranteed to be full.

The landlord can check whether the battery is dead, but under normal circumstances, new products will not have this problem.

If you are mechanical, you can see if it has fallen If there is a problem with the movement, it is best to go to the warranty as soon as possible.

The watch maintenance center is located in Room 3705, 37th Floor, Block 2, Ganghui Henglong Plaza, No. 3 Hongqiao Road, Xuhui District, Shanghai 021-80184441

In fact, there are many reasons why mechanical watches do not go, such as: bumps, movement gear misalignment, magnetization of the watch, shelving for a long time, sludge drying, etc., generally divided into two kinds, the first is because of insufficient kinetic energy. The second is due to a malfunction of the mechanical watch.

Therefore, don't panic too much when you find that the mechanical watch is not leaving, and first distinguish which kind of big one it belongs to.

If you have any questions, please feel free to send me a private message.

Chopard Watches' after-sales center is located at: DU Hongyi International DAO, No. 299 Nanjing East Road, Huangpu District, Shanghai

Room 1003, 10th floor, Plaza, when your love watch is published.

When the fault is done, you should go to the regular after-sales center, and the watch will be comprehensively repaired and inspected by a professional technician, and all the accessories in the after-sales center are original to extend the service life of the watch to the greatest extent!

Looking at the movement, it takes more than 40 hours to copy, and the gap will not be much, only about 8 hours. Some have double barrels. But the time is about the same.

Tissot has 90 hours, but it doesn't really mean much. If you don't wear a watch for 4 days, it means that it doesn't make sense to wear a watch every day.2824 is 46 hours, 2892 is 42 hours, but the 2892 winding rate is not high, and it is likely to be less than 40 hours.

There are two kinds of mechanical watches: automatic watches and manual mechanical watches, mechanical watches need to be powered by people to operate, if you don't wear it, and don't put it on the chain, it will stop running in about 1 day. However, it also depends on the model, some watches can last longer.

In a month, I can't go anywhere.

The main reason for the stop of the whole self-bai mechanical watch is because the power is not enough, especially in the office room, because the hand has been operating the computer for a long time, so the watch is also prone to lack of power in the case of relative stationary, you can first wind up in the morning, and then observe whether there will be a stop-and-go situation, if this situation still occurs, it is recommended that you go to a professional repair shop to find a master to check the reason.

It may be because the watch has energy storage energy to play, and the watch you just bought needs to be fully wounded before use, and the power of the watch is generally very sufficient, but you still have to check it. The second is that automatic watches store power by walking, so if the wearer is not active enough, it may lead to a lack of power, and it is best to take it off and wind it at night. If there is still a problem, it is recommended to check the after-sales outlets on the official website and go to the after-sales inspection and maintenance.

Automatic watches are a modification of manual watches that add an oscillating weight to the watch; When worn, the oscillating weight in the watch rotates in response to the movement of the wrist to achieve the effect of winding. Since the movement of the wrist will continue to wind the watch, automatic watches have a function to prevent the mainspring from being too tight to avoid damage to the mainspring.

Advantages and disadvantagesThe advantages of mechanical watches are: through regular maintenance and washing oil, they can be used for a long time; However, the disadvantage is that the error is larger than that of quartz watches, and errors are caused by the quality of production and the fact that the movement inside the watch is susceptible to the influence of gravity.

Usually the error of a mechanical watch is calculated by how many seconds per day, while the error of a quartz watch is calculated by how many seconds per month.

Precautions. 1. Wear it normally to avoid vibration.

There is an appropriate amount of activity in order for it to continue to be on the bar and function normally (it is normal for the wearer to walk slowly when the amount of activity is small). When using it for the first time, please rotate the handle 20-30 times to make the initial winding of the mainspring), although the watch is shockproof, it is easy to break the tip of the pendulum shaft or the journal of the wheel train when the external impact is strong, and it can also make the fast and slow hand vibration affect the time.

2. Prevent magnetization.

Although the watch is made of non-magnetic materials that are not easy to magnetize, it is greatly affected by magnetic fields, such as the magnetic buckle on the TV, radio horn, backpack or leather bag.

3. The watch is waterproof.

Try not to take your watch to swim or wash clothes, but once it rains or gets wet, don't pull out the watch handle to adjust the watch at this time, but wipe it off immediately. Because the handle head is more protruding, try to avoid it being bumped, and pay attention to the gap between the handle head and the case, too small will affect the operation, and too much will affect the waterproof performance, but also unsightly.