How to wash off the 502 glue on your hands, how to wash off the 502 glue on your hands

hand502 glueHere's how to wash it off:

First, use wind oil essence.

We only need to drop some wind oil essence on the sticky fingers, and let it absorb for ten seconds after dripping the wind oil essence, and after ten seconds, we can gently rub our fingers.

Second, use white vinegar.

Let's prepare a bowl first, and then pour some white vinegar into the bowl, and then just put the sticky fingers in, soak in the white vinegar for a minute, after the time is up, the same fingers rub each other, until the fingers can be separated, this method will not damage the fingers.

Third, use soapy water.

We first prepare a bowl of hot water, and then prepare a piece of soap, use scissors to cut some soap into the hot water, and then stir and melt the soap, and then glue the fingers, well, the fingers have been stuck again, we put the sticky fingers into the soapy water to soak, also soak for a minute, after the soaking time is the same, rub the fingers the same, don't rub too hard when rubbing, otherwise it may damage the fingers**, we also rub until the fingers are separated, All of these methods work very well.

502 is a very viscous glue, if you accidentally get it on your hands, do not touch other objects with your hands, avoid sticking to a larger area of things, the damage to ** is greater, you can improve it by rinsing with cold water, soaking in hot water, applying repair milk, etc., the specific situation is as follows:

1. Rinse with cold water. You can rinse with cold water, solidify the glue on your hands, and then gently uncover, be sure to take your time, do not use brute force, so as not to damage **.

2. Soak in hot water. You can soak your hands in hot water, soak them for as much as possible, you can slowly soften the glue, and then you can gently peel off the glue, which can reduce the damage to **.

3. Apply repair milk. You can apply some repair lotion on your hands to help relieve the discomfort and help you recover.

You can use table salt and warm water, and the cleaning method is as follows:Preparation: table salt, a bowl of warm water.

1. After the finger is stained with 502 glue, immediately wash it with cold water to make its surface agglomerate, as shown in the figure below

2. Then soak your fingers in warm water, as shown in the figure below

3. Then sprinkle some salt on your hands, as shown in the picture below

4. Rub the glue on your hands, as shown in the figure below

5. Finally, rinse your hands again, as shown in the figure below

The method of cleaning the 502 glue on the hands is as follows:

1. Remove glue from wet towels. Apply a wet towel directly to the glue stain, and after a period of time, 502 will become soft, and then wash it off.

2. Insulating oil. The use of insulating oil can remove 502 glue, and the insulating oil can make 502 glue soften quickly, and it can be washed off directly after it becomes soft.

3. Soak in hot water. Soaking it in hot water can also soften 502, and it only takes 5-10 minutes to soak.

4. Wind oil essence method. Drop some wind oil essence on the sticky finger, wait for absorption, and gently rub the finger until it is open after 10 seconds.

5. White vinegar method. Prepare a bowl, pour some white vinegar into the bowl, put the sticky fingers into the white vinegar and soak them, and then gently rub the fingers until they are rubbed open.

The method of washing off the 502 glue on your hands is as follows:First, use wind oil essence.

We only need to drop some wind oil essence on the sticky fingers, and let it absorb for ten seconds after dripping the wind oil essence, and after ten seconds, we can gently rub our fingers.

Second, use white vinegar.

Let's prepare a bowl first, and then pour some white vinegar into the bowl, and then just put the sticky fingers in, soak in the white vinegar for a minute, after the time is up, the same fingers rub each other, until the fingers can be separated, this method will not damage the fingers.

Third, use soapy water.

We first prepare a bowl of hot water, and then prepare a piece of soap, use scissors to cut some soap into the hot water, and then stir and melt the soap, and then glue the fingers, well, the fingers have been stuck again, we put the sticky fingers into the soapy water to soak, also soak for a minute, after the soaking time is the same, rub the fingers the same, don't rub too hard when rubbing, otherwise it may damage the fingers**, we also rub until the fingers are separated, All of these methods work very well.

The 502 glue on your hands can be washed off with a hot compress.

1. When the hand occupies 502 glue, we can use a wet towel to apply it to it, after a while, the 502 glue will become soft, while applying the wet towel to the hand, try to choose a warm or hot wet towel, do not soak it in cold water, so that the effect may be relatively slow.

2. You can also put a basin of warm water, and then put the soap into the warm water to make some soapy water, soak the hands with 502 glue in the water containing soap, and after a while, scrape the 502 glue with your fingernails, and the 502 glue will fall off.

3. In addition, you can also use insulating oil, and the effect is not good, because 502 glue will immediately become soft once it encounters insulating oil, and then we can wash it off directly, but it is more difficult to find the real insulation, and many of the ones on the market are fake, basically not playing any role, so it is not recommended to use this method.

4. Soak in hot water for more than ten minutes, you can also soak 502 glue softly, 502 is on the hand, if not a lot, we can ignore it, every time you take a bath, the friction between the hand and the body will slowly rub off the 502 glue and fall off naturally.

After gluing 502 glue on your hands: if the area of glue is small, you can wait for the glue to dry and then slowly remove it, and pay attention to the gentle action during the peeling process to avoid damage**; If there is a lot of glue on it, if it is not completely dry, you can rinse it with cold water, so that it can be slowly separated from your hands after solidification, and slowly scrub it off with hand sanitizer. When the glue has solidified, you can soak your hands in hot water or organic solvents such as alcohol, acetone, gasoline, etc., and wash it off after it softens and dissolves.

After removing 502, skin care products with a repair function can be applied to repair the damaged ** barrier. If you have allergic symptoms such as redness, swelling and itching on the surface, you can apply calamine lotion externally.