Is it better to buy materials and ask workers to make wardrobes or to buy customized?

1.What is the difference between custom cabinets, custom cabinets, and woodworking cabinets? The main difference is that while carpentry is also custom-made to the needs, carpenters are only responsible for cabinet building.

Cabinet doors are not part of the category of construction and also need to be purchased or customized outside. Custom cabinetry is a combination of cabinet body and door. Comparatively speaking, they are more systematic and comprehensive than woodworking cabinets.

After all, carpenters only make cabinets, and they have to go out to buy cabinet doors. It is difficult to say that the degree of adaptation is not high, and the ** alone will not be cheaper than a custom cabinet.

2.The carpenter master mainly relies on craftsmanship to make cabinets, and good craftsmanship is accumulated over time. If you're unlucky and come across a carpenter with poor craftsmanship, you really can't afford to build your own cabinets.

Custom cabinetry is different. After all, the custom cabinet is operated by mechanization. The edge banding of the cabinet is very important, and the firmness is closely related to the later use, which affects the service life.

The edge banding process and firmness of custom cabinets are better than that of carpentry, and the aesthetics are higher. The quality of the wardrobe mainly comes from the plates and hardware of the cabinet.

The whole house customization has its own designer, which can design the best value cabinet suitable for our home according to our needs, but if you meet a novice designer, you may overturn. Carpentry can only rely on the carpenter's own experience, or we can find our own design and communicate with the carpenter, but the chance of turning the tables is greater. It takes about a month to customize cabinets, while carpenters only need a week to make cabinets, and the construction period is relatively short.

4.Although the accuracy of machine-made furniture is relatively high, customized cabinets require manual on-site measurements, which may produce errors. If it cannot be assembled due to an error, it must be returned to the manufacturer for reassembly.

The woodworking cabinet can be debugged on site, and there will be no situation where the panels cannot be spliced. If there are some temporary conditions on site, the design scheme can be changed at any time. The cabinet made by the carpenter is not flexible enough and can basically be moved.

Custom cabinets originally need to be assembled later, so they are more flexible and can be disassembled, reinstalled or partially adjusted.

I think it's better to choose to buy a custom one. Because there are many styles of customized wardrobes to buy, there are many choices, the cost performance is very high, ** is also very cost-effective, the quality is also very good, especially strong.

You can buy a custom wardrobe, which will make the home very high-end, and it will look very integrated, and it will be designed and measured according to the size of your home.

It must be better to buy materials and ask workers to make wardrobes by yourself, because custom wardrobes are generally more expensive, so it is definitely the best to do it yourself.

Nowadays, many people pay more attention to home decoration, in order to make the family living environment more superior and warmer, many people are particularly careful in decoration, including cabinet decoration, everyone hopes that their family can appear warm and atmospheric at the same time, but also to meet the requirements of health and environmental protection; However, whether to buy the board and find a carpenter to decorate the cabinet or directly find the whole house to customize, it has become a difficult choice for consumers.

Advantages and disadvantages of carpentry furniture:

Pros:1The materials can be selected by themselves. What plate you want, you can choose by yourself, you can control the best plate, you want to buy how expensive it depends on your budget, and you don't have to be made by others to make the difference in the middle.

2.**Relatively cost-effective than customization. Because it is directly for the carpenter master on site, it is basically labor cost + raw material cost, and the cost will be much more cost-effective than customization.

3.The dimensions are directly compared on site, so there is no mistake. Because it is made directly by the carpenter master on site, the size is all compared.

Cons: 1Directly cut or painted by woodworking, the dust is large, and the later cleaning is troublesome. Because the carpenters are working directly on the furniture in the new house, the dust is all over the house.

2.There are few styles, mainly depending on the level of the carpenter. Unlike custom furniture companies, carpenters will not have designers who specialize in developing customizations, but rely on their own knowledge and level. If you want those popular styles, it depends on whether the carpenter can follow them.

3.Edge banding is not as good as custom furniture. The connection of the woodworking cabinet is mainly based on nails, one is not firm, the other is not beautiful, and the manual edge sealing is easy to burst.

Advantages and disadvantages of whole-house customization:

Pros:1Customized design, so the style and size are more suitable for your own home. Customized design is naturally customized according to the location, size and style of each home, which is naturally more in line with the characteristics of each home.

2.There are various styles, styles, and styles. Customized design, now the whole industry chain is perfect, basically you want to have the custom style you want, to meet any style you want.

3.The appearance is guaranteed. Compared with customized furniture, many woodworking furniture looks particularly earthy, in fact, many carpentry masters do not have a professional match. But the custom furniture basically has its own designer, so the appearance is quite good.

4.Peace of mind. Basically, as long as the staff who customizes the furniture measures the size, they can wait for it to be customized and installed at the door, and there is nothing to worry about halfway.

Cons: 1Long customization cycle. Because you are not the only one who orders for custom furniture, the customization cycle will be relatively long. If the construction period is relatively rushed, it is recommended to customize it at the beginning.

2.The material of the plate is not controlled. In order to save costs, many custom furniture usually use particle board as the material for custom furniture. This kind of material is cheap and prone to formaldehyde and other pollution, so it is recommended that you see the material clearly when customizing.

3.Pay extra attention to the size when customizing. Once the custom size is wrong, it will be very troublesome in the later stage, first of all, the size is not right, the installation can not be carried out, and the later renovation is time-consuming and labor-intensive, and it is very troublesome to toss and turn many times.

Buying materials and asking workers to make wardrobes on site has its own advantages and factory custom wardrobes, but now it is rare to buy materials and ask workers to make wardrobes on site, unlike the previous wardrobes in the decoration home mainly rely on carpentry to do on-site, and now making wardrobes is either to buy finished wardrobes or to buy factory custom wardrobes. Personally, I think it's better to buy a factory custom wardrobe.

Many people do not choose to ask a carpenter to make a wardrobe on site, but choose to buy a finished or customized wardrobe, I think it is none other than the following reasons:

One is because the labor cost is getting higher and higher, the cost of carpentry is getting higher and higher, the cost of a carpenter a day is about three or four hundred yuan, the carpenter site to do the wardrobe, the tools are simple, the general efficiency is low, it is more time-consuming, the overall calculation, the site to do the wardrobe ** is not cheap, but also the customer to buy their own plates, hardware, time-consuming and laborious.

Second, there are more and more factories doing whole-house customization, and the furniture customized by the factory has a certain brand, which is relatively professional, the factory has dedicated R&D personnel, professional designers, rich product styles, and the products are processed by machine assembly lines, the quality is more stable, the overall service is more professional, and the wardrobe made on site is not much different.

The third is that now good technology carpentry is becoming more and more scarce, most carpenters can only do some simple wardrobes, the shape is a little more complex can not be done, the on-site wardrobe is not very selective, the appearance of the wardrobe is more limited. There are also some carpentry made of the wardrobe workmanship is not meticulous, the workmanship is rough, the worst depends on luck, it is good to meet a good carpenter to make the wardrobe, and vice versa.

Carpentry on-site wardrobe advantages.

The advantage of making a wardrobe on the carpentry site is that it is completely possible to make a wardrobe according to the customer's own needs, what kind of plate and hardware is used by the customer, the customer has the final say, the product quality is more guaranteed, and the quality and environmental protection are more assured.

DisadvantagesThe disadvantages of the wardrobe made on site are that the wardrobe made on site has a single style, the process is simple, the wardrobe edge banding is generally manual edge banding, the quality is unstable, and the wardrobe connection method made on site mainly depends on gun nails, the cabinet will have nail holes, and the product is not fine enough. The wardrobes made on the carpentry site are basically not able to be disassembled and installed twice, there is no special after-sales service, and it is not easy to find someone to be responsible for the quality problems in the later stage.

Factory custom wardrobes.

The advantage of factory custom wardrobe is that there are many choices, more styles, and more colors, and now many furniture factories do custom furniture for the whole house, and design custom furniture completely according to the customer's house type, size, decoration style, and color matching, which is more professional. The factory's customized wardrobe is processed by machine assembly line, and the products are more refined, the quality is more stable, and the service is more professional. The quality of the cabinet processed by the machine is more guaranteed, and the factory will be responsible for after-sales if there is a problem with the product in the later stage.

The disadvantage of the factory custom wardrobe is that the customer can not see the internal materials of the product, the quality of the plates used is uneven, and some of the plates are not necessarily up to standard, so the custom wardrobe must be selected from the regular manufacturer's wardrobe.

The wardrobe made on the carpentry site and the factory-customized wardrobe have their own advantages, comprehensive comparison, if the best budget is in place, it is better to choose the factory-customized wardrobe.

You can buy your own materials and ask workers to make wardrobes. You can rest assured that the materials you buy will not be cut corners by workers, and you can also save a certain amount of money.

Personally, I may prefer to customize it, because it may cost more money to buy materials to make it myself, and the effect may not be so good, so I personally prefer a customized wardrobe.

Nowadays, skilled carpentry is becoming more and more scarce, and most carpenters can only make some simple wardrobes, and the shape is a little more complex and cannot be done, and the choice is not large.