How to clean the acrylic wash basin when it is dirty

The way to clean an acrylic basin when it is dirty is to scrub the surface of the basin with sliced lemon and rinse it with clean water.

If the surface stain is difficult to remove, you can use non-corrosive bleach, wipe it with a sponge or towel, and then rinse it off with clean water.

1. Dust cleaning.

When dust and garbage are attached to the surface of acrylic products, use a soft cloth, flannel, or sponge dipped in clean water and gently wipe them off. If there is a possibility that the dust or garbage contains hard foreign matter, it is recommended to gently wipe it off before wiping it off.

2. Oil cleaning.

It is recommended to wipe with warm water with a neutral detergent. Acrylic will crack when corroded by solvents, so make sure that the neutral detergent does not contain solvents before use.

3. Red ink stain cleaning.

Wash the new stain with cold water first, then soak it in warm soap for a while, and then rinse it with clean water; Stale stains can be washed with detergent first, and then rubbed with 10% alcohol solution to remove them.

4. Ink stain cleaning.

You can mix rice grains and detergent thoroughly, rub it on the stained part, and then rinse it with water; It can also be rubbed repeatedly with a solution made of one part alcohol and two parts soap, which also has a good effect.

5. Ballpoint pen oil stain cleaning.

The general practice is to put a towel under the stain, use a small bristle brush dipped in alcohol and gently scrub the silk, and after the stain dissolves and spreads, soak it in cold water, smear it with soap and gently scrub it, so that it can be repeated two or three times to basically remove the ballpoint pen oil. If there is still a small amount of residue left after washing, it can be removed by soaking it in hot soapy water or boiling it.

6. Mold cleaning.

Wipe with a 2% soap-alcohol solution, then with bleach 3%-5% sodium hypochlorite or with hydrogen peroxide, and finally wash. Common sense of household cleaning The old and new furniture in the home has gone through the test of time, and problems have followed, such as dirt, scratches, cracks, and even deformation, which will make people very uncomfortable to look at.

How to remove stains from acrylic panels:

1. Ink stains: Mix well with rice grains and detergent, and then rinse with water; It can also be rubbed repeatedly with a solution made of one part alcohol and two parts soap, which also has a good effect.

2. Mildew: Wipe with 2% soap alcohol solution, then wipe with bleach 3%-5% sodium hypochlorite or hydrogen peroxide, and finally wash.

3. Red ink stains: Wash new stains with cold water first, and then rinse with water. Stale stains can be washed with detergent first, and then rubbed with 10% alcohol solution to remove them.

4. Ballpoint pen oil stains: The general practice is to put a towel under the stain, soak it in cold water, smear it with soap and gently scrub it, so that it can be repeated two or three times to basically remove the ballpoint pen oil. If there is still a small amount of residue left after washing, it can be removed by soaking or boiling it in hot soap and water.

Do not use coarse cloths and scouring pads when cleaning acrylic products. Use a sponge or flannel cloth when cleaning acrylic products every week, do not use any cleaning agent containing granular objects, it is best to prevent direct sunlight and contact with cigarette butts with high temperatures, and use mild cleaning agents (such as dish soap) instead of abrasive cleaning agents.

Acrylic material should be waxed, if you want the product to be shiny, you can use liquid polishing wax, and wipe it evenly with a soft cloth to achieve the purpose. If there is no special treatment or hard resistance added, the product itself is easy to wear and scratch. Therefore, for general dust treatment, you can use chicken feather blanket or water to rinse, and then wipe with soft cloth.

If the surface oil stain is disposed of, it can be scrubbed with soft detergent and water with soft cloth. Acrylic, also known as PMMA or plexiglass, is derived from the English acrylic (acrylic plastic), and its chemical name is polymethyl methacrylate. It is an important plastic polymer material developed earlier, with good transparency, chemical stability and weather resistance, easy dyeing, easy processing, beautiful appearance, and has a wide range of applications in the construction industry.

Plexiglass products can generally be divided into pouring plates, extruded plates, and molding compounds.

1.Cleaning the tiles with soap and a little ammonia and turpentine can make them shinier.

2.Polished tiles should be waxed regularly, with an interval of 2-3 months.

3.If there are scratches on the brick surface, you can apply toothpaste to the scratches, and wipe them with a dry cloth to repair them.

4.The bricks and brick gaps can be used to remove dirt from time to time, and then brush a layer of waterproofing agent in the gaps to prevent mold growth.

Don't use hard things like steel wool.

That would spoil the acrylic surface.

You can choose to try it with tea or have an old brand.

I remember what it was called.

Seems to work very well.

I used to use that when I had stains in my house and couldn't wipe them off.

There are no scratches either.