The corners of the wallpaper are stilted, can you use 502 glue to stick it?

After using the wallpaper for a while, the corners actually warped. Although there weren't many warped areas and I didn't need to re-apply all the wallpaper, it looked ugly, so I decided to fix it myself. Since I'm not a professional, I don't know exactly what to do, so I asked a friend in the home improvement industry for advice.

Friends said don't mess with glue, otherwise it will be difficult to stick again, and the wallpaper will be scrapped, and the wallpaper needs to be removed and repasted.

A friend told me that the first thing to do is to analyze the reasons why the wallpaper is warped. There are about the following reasons for wallpaper warping: 1. The wall is too dry or too wet, and the wallpaper is damp and dry, which will cause the corners of the wallpaper to curl. 2. The adhesive force of the glue is not enough, and the corners may be difficult to brush the glue or brush less, which is easy to curl.

3. The glue does not dry enough time, the glue needs 2 to 3 days of dry time, sometimes due to low temperature and strong wind, the drying time is too fast. 4. Quality problems, low quality of wallpaper or glue purchased during decoration, and wrong construction methods. After listening to my friend's words, I went to buy a little glutinous rice glue, and pasted all the warped edges of the wallpaper, and after a while, there was no warping, which simply solved a trouble for me, and the walls at home were restored to their original beauty.

If the wall is dry or wet, it is more troublesome to solve, this is due to the problem of the wall base, it is best to shovel all the base layer and do it again, change the ratio of base materials can solve the drying problem, and do a good job of waterproof layer can solve the wet problem. If the drying time is not enough or the quality is problematic, you can remove the wallpaper and repaste it.

My family carefully checked that it was not the above conditions, and the warping situation was not so serious, so the corners of the glue were painted less during construction, and they could be repaired and repaired. I still have a little bit of white latex stuck to the wood in my house.

I heard that after the wallpaper is soaked in water, it can be repaired very firmly with white latex. I asked my friend if it was feasible, but my friend told me not to use white latex, as it would turn black in the future and affect the appearance. At this time, it is best to use special glue for wallpaper, such as the more healthy and environmentally friendly glutinous rice glue, cover the wallpaper with a hot towel until it becomes soft, and apply glutinous rice glue to paste it.

No, just buy some glutinous rice glue for wallpaper. The reason for using glutinous rice glue is because it can make the wallpaper stronger, more environmentally friendly, and not easy to stick to the wall skin.

1.Use an old toothbrush to gently brush the floating dust and dust on the warped part of the wallpaper; Do not clean the base film, glue and wall skin on the wallpaper, so as not to smooth the wallpaper joints later;

2.Use household sealant (wallpaper glue, safety glue, really not, a small area of 502 can also be improvised, but remember to pay attention to safety and whether the glue is environmentally friendly when using) to the degumming warping edge to make up the glue, the middle bulge part, you can use a syringe to deliver the glue;

Of course I can stick it with 502 glue. Moreover, this glue has no formaldehyde, and the stickiness is particularly tight.

I think so, because 502 has a good stickiness and sticks the wallpaper.

502 sticky things are easy to harden and white, this can be glued with silicone, silicone glue can be glued to hardware, glue plastic, glue silicone, glue marble, stick wood, stick cloth, stick pebbles, stick glass, etc., this has fast adhesive, there is also slow adhesive, Kanglibang technology is the production of this.

Generally, it can't, and even if it is glued, it is not firm.

502 Main uses: porous and absorbent materials, metals, plastics, rubber, wood, ceramics, leather.

502 strong glue, colorless transparent liquid with good fluidity, volatile, polymerization and solidification in contact with water. This product is one-component, fast curing speed, easy to use, strong adhesion, wide range of bonding materials, can be used in steel, non-ferrous metals, rubber, leather, plastics, ceramics, glass, wood, etc., but used in polyethylene, polypropylene, PTFE products, the surface of the material needs special treatment. It is widely used in electrical appliances, instruments, machinery, electronics, optical instruments, medical, light industry and civil industries.

OK. It's just that the viscosity is a little low.

I guess not, just try it yourself.

Summary. Hello, dear <>

<> generally only need to use warm water to wipe the glue clean. You can also use a card to clean the glue.

How to get the glue off the wallpaper on the wall.

Hello, dear [flower collapse] [fresh tuan, eggplant trembling flower] <>

Generally, you only need to use warm water to wipe Navu to clean the glue. You can also use a card to clean the glue.

The glue for wallpaper mainly includes potato glue, glutinous rice glue, barrel glue, etc., these glues have strong viscosity, so they are widely used to pave wallpaper.

There is also a special, high-efficiency adhesive remover on the market, which is a liquid specially used to clean up stains that are difficult to remove. We only need to drop the high-efficiency adhesive remover on the glue stain, and then wait for about 20 seconds, the glue will soften, at this time, as long as the glue is wiped with a shout, it can be cracked to easily clean the glue.

If the glue of the wallpaper is a large area that needs to be cleaned, then it is difficult to clean it thoroughly by yourself, so it is recommended that you find a professional cleaning company to help clean up the glue stains.

If the viscosity of the glue is relatively strong, it should be impossible to be intact.

There are two ways to do this:

1.You can use wine or alcohol to moisten the glue for a while to soften the glue and gently lift it when the paper is half-dry.

2.You can use a hair dryer to blow it, and the glue will slowly soften as long as it is heated.