What is used to polish the original wall surface of wall tiling? What else should I pay attention to

What is used to polish the original wall surface of wall tiling? What else should I pay attention to when tiling the wall?

What is used to polish the original wall surface of wall tiling?

Tools for grinding walls.

The tools used for wall grinding mainly include wall sanders and sandpaper. The grinding effect is very good, and the operation method is relatively simple. The wall mill is a new type of abrasive tool that is more convenient than traditional abrasives.

It can be polished directly on the wall and is suitable for large area walls. The grinding speed is comparatively fast. Sandpaper is a traditional grinding tool.

When choosing sandpaper, you can choose sandpaper that is specifically designed to sand the walls. No. 280 and No. 360 sandpapers have a relatively high degree of friction and a good grinding effect, but they need to be sanded manually. Once the walls have been polished, you can use a light bulb to observe the flatness of the walls and proceed to the next step without any problems.

Attention should be paid to the problems of wall tiles.

1. Before plastering the wall tiles, you need to check if the grade and color of the tiles are the same as the samples you saw when you bought them. If it is confirmed, try to ask the person in charge of construction to sign, otherwise notify the tile seller immediately.

2. If the wall is untreated putty.

For the wall, be sure to remove the wall first. The wall tiles shall not be less than one-third of the bricks.

3. Generally, when laying high-grade wall tiles, cement mortar must be used.

Rendering. At the same time, the walls must also be chiseled and then paved with special wall brick mortar. This method of construction is costly and is not recommended for general home decoration.

4. The quality of wall tiles used in paving is high to prevent the purchase of inferior wall tiles. Poor quality wall tiles will have defects, uneven splicing of wall tiles, etc. The selection of wall tiles should be based on surface flatness and verticality.

Flatness and other important basis for measuring wall tiles.

5. The construction of paving a large area of surface is based on the standard height surface of paving. When paving, the construction begins close to the standard height surface of the paving, and the straight butt of the tiles is controlled by the drawn butt line. When paving, the cement slurry should be fully wiped on the back of the tile and tamped with a rubber hammer to resist the drum.

And use a spirit level when paving.

Inspections and corrections are made. and immediately wipe off the surface grout.

6. When laying the floor of the toilet and toilet, attention should be paid to the formation of a backwater slope of 1:500. After 2 days of paving and curing of the entire ground, the joint plastering construction can be carried out. When plastering joints, place white cement.

Adjust into dry blocks, wipe on the joints, fill the tile joints with white cement, and then wipe the tile surface.

Regarding the methods and techniques of wall tiles, if you have any questions that you don't know, you can consult a professional. There are many issues that should be paid attention to when attaching wall tiles. We should pay attention to large-scale construction, and when laying wall tiles in these special areas, such as bathrooms and kitchens, we should also pay attention to the brightness of the color and the overall slope.

The quality of the wall tiles is directly related to the overall aesthetics of the future.

Be sure to use a professional sander for sanding, because the sander can make the wall smooth, if you put tiles on the wall, you must pay attention to the color of the tiles, and you must match.

The wall should be scraped with putty as much as possible before tiling, and then the wall should be flattened before tiling. The tiles should be soaked overnight before being applied.

The method of grinding the wall with tiles on the wall requires the preparation of some tools and materials, and the specific steps are as follows:

Prepare tools and materials:

1.A spirit level that measures how level the wall is. 2.Pencil and ruler to mark where the tiles will be glued. 3.Conventional tools: cement, trowel, mop, eraser, broom, etc. 4.tiles and tile glue.

Step 1: Check the flatness of the wall.

Before tiling, it is necessary to check the flatness of the wall, measure it with a spirit level, find the unevenness of the wall, and make the bend repaired with a trowel or polish it smooth.

Step 2: Paste the tiles.

According to the size of the wall and the specifications of the tiles, choose the appropriate tile glue for pasting, use a pencil and ruler to mark, make sure that the position and direction of each tile are correct, and leave it for a period of time to dry.

Step 3: Caulking.

After the tile glue is dry, use a trowel to fill the gaps, and then use an eraser to wipe the excess cement dry and bury the holes to ensure the smoothness and beauty of the caulking holes.

Step 4: Tile sanding.

After the caulking is dry, use an eraser and mop to scrub the wall clean, and then sand the tile surface with a sanding machine until the tile surface is smooth and fine.

Step 5: Clean.

After sanding, wipe the wall clean with an eraser, and then clean the work area with a broom.

Things to pay attention to in tile sanding:

1.When sanding, you need to use a grinding machine, choose the appropriate sandpaper for sanding, and pay attention to the safety and operation specifications during operation. 2.

Before sanding, the surface of the tile needs to be cleaned, and any substances that may affect the sanding effect, such as dust, residue, etc., need to be removed. 3.When grinding, it is necessary to pay attention to the control of strength, and not to damage the surface of the tile caused by excessive sanding.

4.After sanding, the work area needs to be cleaned to remove all dust and residues generated during the sanding process to ensure that the construction area is safe and clean.

How to deal with the wall before tiling? Tile laying is a very important decoration project. The process of pasting the wrong bricks not only affects the aesthetics of the decoration, but also brings a lot of follow-up problems.

01。Before cleaning the wall tiles, the wall base should be cleaned first, and the plaster, latex paint, wallpaper and other items on the wall should be cleaned up, because the tiles need sand and concrete, so the adhesion is high. If the putty gets caught between the wall and the wall tile, it will affect the bonding.

After a long period of air drying, it is easy to separate and crack. Therefore, before pasting the tiles, they should be shoveled off.

02。Check whether the wall tiles are qualified. If there are cracks in the wall, they must be repaired before tiling can be laid.

Otherwise, the cracks will get bigger and bigger over time, causing the wall tiles to crack or fall off. How to deal with the wall before dismantling and balancing? In addition, when the wall flatness or verticality gap is large, it is also necessary to smooth it with cement mortar before paving.

03。Wall tiles should be fully submerged in water before they are fully submerged. Due to the high moisture content of wall tiles, full immersion is to prevent the bricks from absorbing water from the cement mortar, so that the cement can play a binding role, so that it will not produce hollowing, falling off or even cracks.

How to deal with the wall before tiling? Therefore, wall tiles should be well watered and moistened, and they should be soaked in water for at least 20 minutes before drying completely in a cool place.

What should I pay attention to when pasting tiles?

1。When laying floor tiles, it should be noted that the drainage pipe should be ensured before tiling. Because the exposure of the sewer pipe will not only affect the aesthetics, but also there will be a lot of noise when the water comes out, so before laying the tiles, be sure to ensure that the pipes are made.

In order to reduce the noise of sewage, the water pipes can be wrapped with soundproof cotton and then built with bricks.

2。When laying tiles in the kitchen and bathroom, attention should be paid to waterproof treatment. Moreover, the tile does not absorb water after waterproof treatment, so when laying the tile, it should be reinforced with tile adhesive to avoid the tile falling off.

3。How to deal with the wall before tiling? In home decoration, the order of tiling is to first stick to the wall, then to the floor, first to the interior, then to the door, and then to dry before stepping on it.

You can get it for free

Wall tiles are one of the many decoration materials, there are many products about wall tiles in the building materials city Shiming field, and their types, wide return to the style, **, are different, but no matter what kind of wall tiles, professional personnel must be used for constructionHow to paste wall tiles well?Then it needs to be done step by step.

How to paste wall tiles well1. Leveling, whether it is ground bricks or wall tiles, during construction, the surface of the wall should be kept flat, if it is uneven, it needs to be cleaned up, the wall surface is cleaned, and then sprinkled with water, and finally leveled with cement and mortar mixture, so that the construction can begin. Be careful.

How to paste wall tiles well2. Pull the line, according to the designed drawings, and then determine the arrangement of the wall tiles, and then pull the marking on the wall after completing the above steps, this step is to pave the wall tiles on a horizontal straight line, so that the gap is in a straight line.

How to paste wall tiles well3. Soak in water, soak the wall tiles in water for a while, and use them after they are dry after there are no bubbles.

How to paste wall tiles well4. Mixing, usually the wall tiles are made of No. 425 cement, and the sand should be in the sand, and then the two are added with water at 1:3, and they have been stirred and waited for use. Do not choose cement with too high a grade, otherwise it will affect the quality and cause safety accidents.

The ratio to sand and water must be moderate, and stir evenly until it can be used.

How to paste wall tiles well5. Paving, spray the wall with water, and then evenly smear the reverse side of the wall tiles with cement mortar, not too thick, if it is a large standard wall brick, it should be thicker, after paving to the wall, gently knock a few times with wooden gas, so that it can be more firm. When paving wall tiles, we should pay special attention to whether the wall tiles are flat, whether they are in a horizontal straight line, and some wall tiles will have lines, and we should also pay attention to them during construction.

How to paste wall tiles well6. Inspection, after the completion of the construction of the wall tiles, check whether the tiles are hollow, you can use a small shovel or a wooden handle to hit the brick surface, professional construction personnel, through the sound can be judged. If there are hollow wall tiles, they should be re-installed.

How to paste wall tiles well7. Hooking, which is the best step for paving wall tiles, use special tools and grouts to hook and joint.

How to paste wall tiles? Follow the above seven steps, and the effect of posting must not be bad.

You can get it for free