Can you put wallpaper on a white lime wall?

Hello, the big white wall is not sticking to the wallpaper.

because the walls are painted with lime mortar.

Later, after drying, it is lumpy, but after a certain period of time, it is affected by carbon dioxide in the air.

When combined with water, it produces a powdery substance (caCO3), which is not sticky, and will stick to your hand when rubbed with your hand.

How to put wallpaper on lime wall?

1. In principle, the wall surface can be pasted when it is flat and dry.

2. Wallpaper on cement and brick walls: it is relatively flat and uses putty.

Flattening, brushing with a thin layer of varnish can be pasted with wallpaper.

3. Wallpaper on the powder wall: that is, there is an unstable powder on the wall, which should be sanded to remove, leveled, and brushed with the base film before the wallpaper can be pasted.

4. Wallpaper on the bare wall: that is, the wall is very smooth, such as the painted wall), it is not easy to absorb glue, it is not easy to dry, and the subsequent force will decrease, so it can be pasted with wallpaper after sanding.

5. Paint wallpaper: The paint wall is very suitable for changing wallpaper, but it needs to be sanded and brushed before the wallpaper base film can be constructed. The wall pretreatment of wallpaper is actually about the same as the wall pretreatment of brushing.

6. Before construction, the wall should be brushed with base film. The purpose of brushing the base film is to solidify and protect the surface of the putty, and it can also strengthen the waterproof and mildew-proof function of the bottom of the wall, but it can only be painted when the putty is completely dry. The base film is an environmentally friendly product, easy to dry, and an alternative to traditional varnishes).

7. Any wallpaper wallcovering.

None of them can be immersed in water.

For people who decorate the house, when the house starts to move in, the walls of the house are almost all lime walls, so when the house is decorated, the walls of the house must be decorated to a certain extent, there are many decoration methods for the lime wall, and nowadays, people are more and more keen on the lime wall wallpaper, and more and more people in life will have such questions: how to paste wallpaper on the lime wall, how to paste wallpaper on the lime wall for children, I hope that through the introduction of this article, it can bring you some help.

In the process of house decoration, the decoration of the lime wall is a thing that people are very concerned about, because the quality of the social wall decoration directly affects the level of the whole house decoration, and the decoration methods of the lime wall are also diverse.

The lime wall can not be pasted with wallpaper, the lime will fall after a long time, and the wallpaper will fall off no matter how good it is, so the lime should be shoveled clean and then the wallpaper should be pasted.

The white lime wall feels better than spraying latex paint.

Lime walls can be tiled.

Paste tiles directly on the white plaster wall, and wet the wall and brush a layer of cement mortar.

It is recommended to mix an appropriate amount of construction glue into the cement mortar to avoid the cement mortar drying too quickly, and the next day after the completion of the above process, you can follow the normal tile steps to complete the wall renovation. If the white ash on the white ash wall has been chalked and peeled off, it is recommended to remove the white ash on the wall.

Often prefer to choose large-size tiles, thinking that the overall effect of large-size tiles is generous. However, we should pay attention to the fact that the size is good, but it is also necessary to choose according to the size of the space, and the size of the tile should be slightly smaller for the area with a smaller space to be more hierarchical.

Dear, I've been waiting for a long time, I'm happy to answer for you, can lime walls be tiled? Not recommended. In the case of lime walls, it is generally not possible to directly apply tiles to the wall.

If the tiles are directly pasted on the lime wall, it is generally easy to cause the tiles to crack, hollow, and fall off in the later stage. 2. If you want to paste tiles on the lime wall, you generally need to remove the lime wall first, until the brick wall, then clean the wall, then wet the wall, and then repaint the wall with cement mortar. When painting cement mortar, you can add an appropriate amount of construction glue to the cement mortar to avoid the cement mortar drying too quickly.

Pro-<>

The lime wall cannot be attached to the wallpaper, because after the lime mortar is painted on the wall, after drying, it is lumpy, but after a certain period of time, it will produce powdery things (caCO3) due to the action of carbon dioxide and water in the air;

This thing is not sticky, it will stick to your hands when you rub it with your hands, and if you stick wallpaper on top of such a material, it will not be long before the wallpaper will warp as the wallpaper glue dries and shrinks.

If it is pasted, it needs to be further processed, it is recommended to batch putty, polish and level after drying, clean the wall brush base film, and then paste the wallpaper, lime powder, the wallpaper is easy to fall off, you can find the paint will be approved putty, or use tempered paint.

The wallpaper wall can be paved with the first base treatment.

The premise of sticking wallpaper is that the wall requirements are to scrape 2 or 3 times putty and leveling, that is to say, only the wall base layer is putty to ensure the construction quality and service life of the wallpaper, including the wallpaper on the wooden board should also be treated in this way; If you want to put wallpaper, you have to do it:1The wall is made of original putty, leveled, 2

Generally, the putty is scraped immediately after sandblasting, but the putty layer should be firm, and there should be no cracks or peeling; The base layer can be processed before the wallpaper can be pasted.

Can't paste it, it will fall off after a few days, our home is used, double-sided tape paste, it's OK, however, it's hard to look after taking it, if you want to stick it on the wall for a long time, it's okay, but you can also ask the people of the decoration team, they have a way,

It is necessary to remove the surface first and then apply the tiles.

The lime on the surface layer must be removed, which is not allowed, it must be dropped, and then the wall is covered with a layer of cement paddles. Add some construction glue to the cement paddle, otherwise it will dry too quickly and it will be useless if it is dehydrated. Wet the wall with more water before shabu-shabu.

It's generally okay to wait until the next day to put tiles, but it's not as strong as a pure cement base wall.

Tile adhesive thin lamination method:

1. First check whether the lime mortar wall of the wall is hollow and delaminated, and the firmness and flatness of the lime mortar layer;

2. If there are the above problems on the wall of the lime mortar layer, the problematic places need to be removed for rectification;

3. Brush the interface agent on the base layer;

4. Use tile adhesive for tile pasting.

Cement mortar wet paving method:

1. Remove the lime mortar layer on the surface;

2. The uneven surface is treated with cement mortar, and the wall is brushed after it is dried; (Note: Before doing cement mortar brushing treatment, the dry cement mortar plastering wall needs to be sprinkled with water to moisten it, and the purpose of sprinkling water is to prevent the dry wall from absorbing the moisture in the brushed mortar too quickly);

3. After the brushing layer is dry, sprinkle water on the brushing layer for moistening, and then use cement mortar to paste the tiles.

Remarks: The cement of the tile is ordinary Portland cement with a strength of megapascals, and the sand is medium river sand, and its ratio is proportioned according to the volume ratio, generally speaking, the ratio of cement sand paved with full ceramic tiles is about 1:2, and the volume ratio of cement sand paved with ceramic bricks is 1:3.

Question: It is best to shovel out the white mortar from the plastering cement mortar and blow it on the wall tiles.

Answer: first check whether there is a hollow drum delamination on the lime mortar wall of the wall, the firmness and flatness of the lime mortar layer, if the lime mortar layer wall has the above problems, it is necessary to remove the problematic place for rectification, brush the interface agent at the base level, and use tile adhesive to paste the tile.

You can tick the dots on the wall, or you can't stick it, thank you for adopting.

If you don't have an anti-magnetic coating, you can apply tiles directly.

Before pasting wallpaper, the wall should be putty first, so that the wall is neat and clean, and then brush a layer of varnish or base film The base film has the function of moisture-proof and mildew-proof. If it is just brushed and not more than 1 year, you can directly put on a layer of base film and then paste wallpaper, if it is an old house or brush the paint time has been more than 1 year, in general, the wall should be reprocessed.

Yes! It is recommended to batch putty, polish and level after drying, clean the wall brush base film, and finally paste the wallpaper.

To do a good job in the base treatment, is to scrape putty, only the wall is flat to paste wallpaper, polishing is to use sand to smooth the wall sand.

The lime is powdered, the wallpaper is easy to fall off, you look for a painter and they will approve the putty, they will tell you what the putty is, or go to the paint shop to buy it yourself. Or use tempered paint, which is sold in paint stores.

Apply a layer of varnish and you can apply it.

Lime walls can not be wallpapered.

The lime wall cannot be wallpapered, because after the wall is painted with lime mortar, after drying, it will be lumpy, but after a certain period of time, it will produce a powdery thing (caCO3) due to the action of carbon dioxide and water in the air.

And the lime wall is not sticky, it will stick to the hand when rubbed by hand, if you stick wallpaper on such a material, as the wallpaper glue dries and shrinks, it will not take long for the wallpaper to warp.

Summary. Hello, the surface of the lime wall is not suitable for direct wallpaper, because the surface of the lime wall is rough, the wallpaper is difficult to adhere to it, and the humidity and alkalinity of the lime wall will also have an impact on the adhesion of the wallpaper. If you must paste wallpaper on the lime wall, you need to treat it first, and the general treatment method is to apply a layer of latex paint or primer on the surface of the lime wall first, and then paste the wallpaper after it is dry.

This increases the adhesion of the wallpaper and also protects the lime wall from damage. However, it is advisable to put tiles or other materials on the surface of the lime wall, which is more secure.

Hello, the surface of the lime wall is not suitable for direct wallpaper, because the surface of the lime wall is rough, the wallpaper is difficult to adhere to it, and the humidity and alkalinity of the lime wall will also have an impact on the adhesion of the wallpaper. If you must paste wallpaper on the lime wall, you need to treat it first, and the general treatment method is to first coat the surface of the lime wall with a layer of latex paint or primer, and then paste the wallpaper after it is dry. In this way, the banquet can increase the adhesion of the wallpaper, and at the same time, it can also protect the lime wall from damage.

However, it is recommended to put porcelain digging bricks or other materials on the surface of the lime wall, which is more secure.

How to put wallpaper.

If you must put wallpaper on the lime wall, you need to do the following: clean the surface of the lime wall to remove loose impurities such as dust and oil. Brush a layer of primer on the surface of the lime wall, and wait for the primer to dry before pasting the silver wallpaper, which can increase the adhesion of the wallpaper.

Before pasting the wallpaper, it is best to apply a layer of glue on the back of the wallpaper, which can increase the adhesion between the wallpaper and the wall. Choose a wallpaper that is suitable for lime walls, such as those with a deeper texture, so that you can better apply lead to lime walls. It should be noted that if the humidity and alkalinity of the lime wall are high, it may have an impact on the adhesion of the wallpaper, so it is best to check the humidity and alkalinity of the lime wall before applying wallpaper.

In general, the surface of the lime wall is rough, which is not suitable for direct wallpaper. If you put wallpaper directly on the lime wall, the wallpaper is likely to blister or crack, affecting the appearance and service life. If you must put wallpaper on your lime wall, here are some things you can do:

After the primer is completely dry, apply a layer of wall latex paint that is missing from the usual clumps so that the wallpaper can better adhere to the wall. 3.Apply a layer of latex or wall-specific glue on the back of the wallpaper to enhance the adhesion of the wallpaper.

4.Choose a good quality wallpaper and soak and soften it well before applying it to better fit the surface of the wall. It should be noted that the above methods are for reference only, and the specific operation needs to be adjusted according to the actual situation.

If you are not sure how to do this, it is recommended to consult a professional decorator or wallpaper seller.