It turned out to be how to paste wallpaper on the putty wall

Wallpaper is a kind of wall decoration born in response to the requirements of the times, and it has incomparable advantages of other wall decorations such as paint. Do you want to know how to paste wallpapers? If you are interested, you can come in and have a look!

1. Treat the wall: deal with the impurities on the wall, scrape off the floating soil, and use gypsum to smooth the holes and cracks to make the wall clean and firm, so that the wallpaper is not easy to fall off.

2. Determine the size of the wallpaper: the length of the wallpaper must be determined according to the height of the wall, under normal circumstances, the length of the wallpaper is not about 5 to 8 cm according to the height of the wall, which is used for trimming up and down; For the flower wallpaper, consider the symmetry of the pattern, increase the length of the wallpaper according to the actual situation, usually when cutting, increase the length of 8 to 10 cm.

3. Brush glue: use a brush to paint the wallpaper glue on the back of the cut wallpaper, and the edges around it must be coated with glue, in order to ensure the quality of construction, the wallpaper needs to be folded in half for 5 to 10 minutes after the glue is applied, so that the glue can be completely penetrated into the bottom of the paper, and then it can be posted.

4. Wallpaper construction: After the wallpaper is posted, it is necessary to use a scraper from top to bottom, from the inside to the outside, gently scrape the wallpaper, and squeeze out more bubbles and glue to make the wallpaper flat and close to the wall.

5. Cleaning and retouching: cut off the excess wallpaper at both ends, then use a sharp knife edge to deal with the burrs, and completely wipe the glue on the surface of the wallpaper with water to prevent the wallpaper from turning yellow.

After you see how to paste wallpaper, do you think it's very simple? The pasting process of wallpaper is mainly divided into the above five steps, if you are interested, you can collect it!

After the putty is sanded and smoothed, and the primer is brushed, the wallpaper can be pasted. I hope my answer can help you.

It is still necessary to polish the wall, level the wall, and then brush the base film and paste the wallpaper.

On the treatment of the wall, scrape putty.

Is it better to put wallpaper? 1. Consider from the perspective of environmental protection.

Because the wallpaper uses nitro paint or glue as the key binder, it is difficult to avoid a lot of formaldehyde emissions.

Harm people's physical and mental health, and wallpaper also contains some other chemicals that are harmful to the human body, the selection must be strictly controlled throughout the process, do not leave anything to chance; The paint is relatively reassuring, because it only needs to be brushed on the wall, so even if there is a slight formaldehyde emission is in line with the national industry standard, it is not easy to have great damage to the body.

2. Consider the role of application.

The wallpaper is more beautiful, the pattern design is rich and colorful, the color tone is more, and the style is also many. However, the edge of the wallpaper will be warped after a long time, which is very harmful to the appearance, and the poor quality wallpaper will continue to yellow; The paint is easy to paint, the color selection is calm, the level of environmental protection is high, and it is suitable for large-scale brushing, which saves labor and time.

3. Consider from the interior decoration again.

Many years later, when you consider interior decoration again, the wallpaper is not only the cost of raw materials, but also the original wallpaper, but also the bottom layer of putty powder.

Remove a piece of glue, then batch putty again, and buy new wallpaper again to paste; The paint is relatively more assured, only need to polish the original paint slightly, brush the paint again, and you can dry yourself, and even save the material cost.

4. Consider from the perspective of construction.

Wallpaper construction to apply a lot of nitro paint, and the texture to be aligned, can not be displaced, otherwise it will endanger the appearance, so the standard of staff should be high, it takes a long time; The construction time of the coating will be greatly shortened, saving a lot of time, and the actual operation difficulty coefficient is not large, and the construction can be carried out by skilled hands.

The above is my detailed introduction, I hope it will help you after reading it and solve the problem as soon as possible.

Wallpaper is good, because the wallpaper is cheap, and it is easy to take care of, the quality is very good, the use time is long, very labor-saving, time-saving.

It mainly depends on personal preference, but I prefer to scrape putty, because the walls will look cleaner and brighter.

Wallpaper is better, and it is also more practical, and it can also be disassembled by itself, and it is also more convenient, and it can also improve the quality of life, and it can also improve the layout of the room.

Putty walls can be wallpapered, and a layer of base film should be brushed before wallpaper.

Reasons for brushing the base film:

1. Prevent the wall from moisture outfiltration, moisture and mildew.

2. Solidify the wall to prevent the wallpaper from falling off.

3. Cover stains and beautify walls.

4. Protect the wall and facilitate construction.

5. Water-based raw materials, safe and environmentally friendly.

Now many new houses in the delivery of the house, the wall has been scraped putty, if the decoration is carried out directly, worry about the quality of the problem, but if all scraped off, this will be a lot of money, so many owners are more entangled. So, can putty walls be directly wallpapered? What should I pay attention to when putting wallpaper?

Let's take a brief look at it together.

1. Can the putty wall be directly pasted with wallpaper?

Generally, even if the surface surface is flat, dry and there are no other serious defects, you also need to paint a layer of multi-effect full parapet wall base film before you can start to paste wallpaper, so that the effect will be good, if the wall has a slight powder loss, you need to paint a layer of permeable base film before you can paste wallpaper, if the quality of the wall is very poor, you need to scrape off the whole wall and repaint.

2. What should be paid attention to when pasting wallpaper?

1. Base treatment is the key to wallpaper, before construction, it is necessary to ensure that the surface of the wall is smooth and free of any particle impurities, including floating ash, oil and water droplets, because this will affect the fit of the wallpaper, and ultimately affect the decorative effect.

2. Before pasting wallpaper, you must choose a suitable base film according to the situation of the wall, if the wall is powdered, you must choose a permeable stool base film, if the pH value of the wall is too high, you need to choose an alkali-resistant closed wall base film, so as to ensure the quality of aluminization of wallpaper paving.

3. When paving the wallpaper, you need to use tools to play the line first, which means that the horizontal line and vertical line will pop up on the wall that has been processed, so as to ensure the uniformity of the wallpaper, and there is a basis for pasting, and the overall effect will be better.

4. It is best to choose dry paste for wallpaper, first apply the glue on the back of the wallpaper, and then put it on the side to dry for 5 minutes, and finally when you go on the wall, use a scraper to squeeze out the excess glue, and so on, which can effectively reduce the wallpaper curling and glue next to it.

Summary: The above about whether the putty wall can be directly pasted with wallpaper, and the precautions for sticking wallpaper are introduced here, I hope it will help you. If you want to know more about related information, please pay attention to Qeeka Home.

Whether you need to scrape putty before pasting wallpaper depends on the following two aspects: 1. Wall flatness If the wall flatness is better, you don't need to scrape putty. If the flatness of the wall is not good, you need to scrape putty, because the wallpaper posted on the uneven wall is not good-looking.

2. The number of times you paste wallpaper. If you have pasted wallpaper before, you need to shovel off the original putty and scrape it again when pasting it this time, if you don't scrape it directly, it is easy to cause blistering on the wall, and it will fall off after a long time.

Daily maintenance of wallpaper:

1. Avoid blowing hot air on the wallpaper, because the wallpaper is prone to cracking and discoloration when heated.

2. Usually use a feather duster to wipe off the dust on the surface.

3. Avoid touching the wallpaper with sharp and heavy objects to prevent damage.