Can you cut off the leaves of a freshly turned iron tree bonsai?

Iron trees grow very slowly, and they don't lose much water, so it is not recommended to cut off the leaves after potting, otherwise it will affect the appearance.

The small iron tree can cut off the leaves for the following reasons:

1. It is conducive to the survival and new leaves of the damaged iron tree, in fact, the rapid propagation method of the iron tree is to cut off the leaves.

2. Cutting off some of the leaves of the iron tree can have more adequate hair supply to the roots and trunk of the tree. But don't hurt the apical growth point and young leaves.

This is due to the fact that you have been indoors for too long.

and the place where it is not lit is sufficient.

Of course, it's an abnormal phenomenon!

However, even the increased light can't shorten the current leaves!

Iron trees are most afraid of long leaves, so the ornamental value is very low!!

It is recommended not to cut it off at first, put it in a well-lit place, and require good ventilation, and give sufficient light after a week.

Watering should be dry and wet alternately, and it is necessary to water some fertilizer or apply fertilizer to promote growth.

And cut off all the yellowing old leaves at the bottom!!

After the existing new leaf leaflets are hardened, it can be considered to be cut off completely. Let it sprout new leaves!

Be careful, don't cut too early, and don't water too often after pruning, and it's best to water fertilizer water every time, don't just water water!!

If there are outdoor conditions, it is best to maintain! After the leaves are hardened, they can be placed in semi-shade or light scattering to watch!!

The new shoots have grown, but they are not yet there, so it is best to prune, because the new shoots grow very quickly, and the old leaves are not good for the growth of the new leaves. Cutting off the old leaves can make the new leaves shorter, and it is important to turn the pot once during the growth process of the new leaves, otherwise it will be biased and biased to the side of the light. It is also possible to cut off all the leaves before the new leaves grow if the temperature is high, but it may take a long time to be bald.

The leaves are naturally curled, some are only a variety, and some are thought to be done during the growth period, and those who are not skilled are easy to break the buds.

That is, it is suitable to cut off all the old leaves before the new leaves are born in spring.

It can be removed, or it can be retained.

The iron trees in the north cannot overwinter outdoors because the cycads are native to southern China and India, and they like warmth and cold, and they are affected by frost when the temperature is lower than 0; In the area north of the Huai River in China, the temperature often drops to below zero due to strong cold snaps in winter, and the fleshy roots of the cycad bridge are very easy to freeze, resulting in yellowing of the leaves and even the death of the whole plant; Therefore, it is necessary to pay attention to anti-freezing and warmth during winter maintenance, take cold-proof measures before the arrival of the cold snap, and try to move the iron tree to indoor maintenance, so that the wintering temperature is not lower than 5, so as to prevent the leaves from freezing and rottingIron tree breeding methods and precautions is watering and pest control, in fact, the iron tree is quite good breeding, pay attention to frost prevention in the north in winter, usually pay more attention to whether the leaves of the iron tree are pests and diseases, after timely prevention and control, if there is really no effect, the leaves will be trimmed, and the iron tree will automatically grow new leaves after a few days.

The abstract can be changed, and it is best to put it in the shade for a period of time after changing the pot, and the cycads will open a round of new leaves every Spring Festival.

Flower pots are usually medium pots with a diameter of 20 to 30 cm. Before planting, put 2 cm thick coarse sand or gravel at the bottom of the pot as a seepage layer, and the culture soil should be mixed with 4 parts of humus, 3 parts of garden soil, 1 part of bone meal, 2 parts of river sand, and 200 grams of rust iron filings, and use the rotten soybean cake fertilizer as the base fertilizer. After planting, water thoroughly, put it in a cool place for half a month, and then move it to the north wind and sunny place for maintenance.

Always keep the potting soil moist, but not too wet, and generally water it once every 2 days in April and May. Iron trees are not resistant to water stains, so pay attention to timely drainage after rain. 6 August grows faster, when the temperature grows high, the evaporation is large, the amount of watering can be increased appropriately, except for rainy days, water should be watered once a day.

Control watering after September and master the principle of "dry and wet". During the growing season, liquid fertilizer is applied once every 15 to 20 days. Stop fertilizing in autumn.

Iron tree likes sunlight, in spring and autumn, the seedling stage is best placed in direct sunlight (but not exposed) maintenance, and then moved indoors to watch after the new leaves grow. In winter, when the temperature is below 0 degrees, it should be moved indoors for wintering. Keep the room humid at 5-10 degrees.

Leave the room in April of the following year, and change the pot once every 2 3 years. During the growth of iron trees, when the main trunk of the plant is 40 to 50 cm high and the new leaves are grown, the lower weak yellow leaves should be cut once or at least once in two years to keep the tree neat and plump.

Is it okay to change the pot of the iron tree in summer?

Hello, I have seen your question and am sorting out the answer, please wait a while

It can be changed, and it is best to put it in the shade for a period of time after changing the pot, and the cycads will open a round of new leaves every Spring Festival. Flower pots are usually medium pots with a diameter of 20 to 30 cm. Before planting, put 2 cm thick coarse sand or gravel at the bottom of the pot as a seepage layer, and the culture soil should be mixed with 4 parts of humus, 3 parts of garden soil, 1 part of bone meal, 2 parts of river sand, and 200 grams of rust iron filings, and use the rotten soybean cake fertilizer as the base fertilizer.

After planting, water thoroughly, put it in a cool place for half a month, and then move it to the north wind and sunny place for maintenance. Always keep the potting soil moist, but not too wet, and generally water it once every 2 days in April and May. Iron trees are not resistant to water stains, so pay attention to timely drainage after rain.

6 August grows faster, when the temperature grows high, the evaporation is large, the amount of watering can be increased appropriately, except for rainy days, water should be watered once a day. Control watering after September and master the principle of "dry and wet". During the growing season, liquid fertilizer is applied once every 15 to 20 days.

Stop fertilizing in autumn. Iron tree likes sunlight, in spring and autumn, the seedling stage is best placed in direct sunlight (but not exposed) maintenance, and then moved indoors to watch after the new leaves grow. In winter, when the temperature is below 0 degrees, it should be moved indoors for wintering.

Keep the room humid at 5-10 degrees. Leave the room in April of the following year, and change the pot once every 2 3 years. During the growth of iron trees, when the main trunk of the plant is 40 to 50 cm high and the new leaves are grown, the lower weak yellow leaves should be cut once or at least once in two years to keep the tree neat and plump.

After the new leaves of the iron tree grow, the old leaves can be pruned, which can reduce nutrient consumption and promote the germination of new leaves. The suitable temperature for the growth of iron tree is between 15 and 20, and the temperature is high in summer and can be watered once in the morning and evening, and the iron tree is repotted once every other year, which can increase the soil permeability and promote the growth of the iron tree.

When the iron tree grows new leaves, the old leaves can be pruned to reduce the consumption of excess nutrients, which can promote the germination of new leaves of the iron tree. As a foliage plant, timely pruning can improve the growth form of the leaves and enhance the ornamental nature of the iron tree.

The iron tree prefers a sunny environment, the leaves of the iron tree are hard and thick, and it has good cold tolerance, and the leaves of the iron tree are also kept green in winter. Iron tree uses loose and fertile soil, add some mud and sandy soil to calm Xiang, can effectively increase soil air permeability, summer growing season, can add ferrous sulfate solution, promote the growth of leaves.

The suitable temperature for the growth of iron trees is between 15 and 20, and the watering control should be paid attention to, and the appearance of stagnant water will cause the rot of the roots. In summer, the temperature is too high and the climate is dry, so you can water once in the morning and evening, and spray water on the surface of the leaves to cool down and humidify.

Iron trees can be repotted every other year to effectively increase soil permeability. After disinfecting the soil, the growth of bacteria can be reduced, and the infection of iron trees can be avoided. Pruning the damaged roots of the iron tree and replanting it in pots can improve the vitality of the iron tree.

1. Prune all the leaves.

2. Place in a sunny place.

3. Watering should be signaled by the dryness of the topsoil, and it should be watered thoroughly when watering.

4. Apply compound fertilizer once every half month.

5. When new leaves grow, the leaflets should be watered when they want, so that they can get shorter leaves and have higher ornamental value.

6. Wait for the new leaves to harden and then move to the ornamental position.

If you haven't grown new leaves, don't care about it, as long as it's not too dry, don't put it indoors when growing new leaves, there should be enough light, otherwise the leaves will turn yellow and even wither, although it can't die and affect the appearance, it is recommended to live in a building and put it on the balcony every two or three days, and turn the pot until the leaves finish growing, so as to prevent the leaves from growing in one direction.

There is no dead rule, as long as it does not affect the ornamental effect, but the old leaves will make the new leaves grow more slowly.

Cycads grow 1 2 rounds of new leaves every year, and after the new leaves are ripe, it is recommended to cut off the lower old leaves to keep the posture clear and quaint.