What should I pay attention to when decorating a house by the sea? What should be done to prevent mo

The humidity of the house by the sea will be relatively large, and the use of wallpaper should be avoided as much as possible in the process of decoration.

When decorating, we should pay attention to the moisture-proof work, and the moisture-proof work of the furniture should be coated with a layer of paint, which can play a good maintenance role.

It is necessary to pay attention to the moisture-proof design, choose the right decoration materials, you can do some waterproof treatment, and the furniture should choose some relatively strong ones that are not easy to rust.

1. Selection of decoration materials.

In terms of materials, you can choose more stone and ceramic tiles as the main decoration materials;

I especially like the wooden decoration style, if it is necessary, we must be prepared for moisture, for example, choose a better paint and coating, and choose a regular shopping mall to buy brand wood;

If you brush latex paint, you should choose dehumidification treatment to completely drain the moisture in the air;

In the selection of furniture, try to choose some moisture-proof products, especially the hardware products in the kitchen and bathroom, if the quality is not good, there will be rust after a year and a half, which is more troublesome.

2. Attention points in decoration design.

The structural design is reasonable to ensure good ventilation and lighting. Fresh air and geothermal pads can be used reasonably to alleviate the problem of dampness and mildew.

The construction should be carried out in a season with a relatively small temperature difference with the local climate throughout the year!

As a person who grew up on the seaside, in fact, I don't think there are too many things to pay attention to in the decoration of houses in coastal cities, as long as the house is not too close to the seaside, or the floor is particularly low, there is no damp trouble in actual life, only the sea-view house or villa area located on the coast will have various requirements. Do a good job of moisture-proof and anti-corrosion decoration. At present, many decoration companies will work hard in this area to avoid construction problems.

The upward tide of the underground will be a very annoying and uncomfortable problem. In the past, before laying floor tiles, terrazzo and other surface layers, many people would first lay a layer of plastic sheeting to prevent moisture. When it rains on a cloudy day, the ground is damp, and some even bubble up.

The material used in the ground moisture barrier should be a polymer modified asphalt waterproofing membrane to subsidize.

This is the right moisture-proof and waterproof construction material. The ground is overhead, and many rural self-built houses have made a foundation, and the backfill will leave a certain height of space, and then lay prefabricated slabs as the ground, which is a very good moisture-proof measure. Moisture-proof building:

Technical measures to prevent dampness in buildings using construction methods.

It is divided into two cores: 1. A measure to prevent the erosion of the walls and ground of buildings by moisture and water seepage under the ground. 2. Reduce steam penetration and prevent water vapor from moisture-proof houses, and everyone is too entangled in the waterproof material itself.

Of course, the airtightness and long durability of the material are the most important. I think ordinary thickened plastic film will do...The first thing is to block the moisture, so how to let the moisture in the ground be discharged is the key issue.

The humidity on the surface is due to the fact that the weather begins to warm up as soon as the cold air leaves, but the surface temperature is still very low. At this time, when the indoor weather is humid and the relative humidity of the air is relatively large, the warm and humid air flow from the outside enters the room and the house is built on a high platform as much as possible.

Around the foundation, dig a drainage ditch. In this way, it is not easy for outdoor water to enter the room, and the first floor level can be basically guaranteed. Open a few large windows to ensure ventilation and lighting in the room.

There are several issues that must be paid attention to when laying plastic sheeting, one is that the ground must be leveled before laying. Use grinding to smooth the uneven ground, or use cement mortar to level the ground, so as to avoid the unevenness of the plastic sheet causing damage, which can not play the role of leakage and moisture-proof. The simplest and most commonly used method is to open the windows and allow the air to circulate naturally, and the moisture in the house will be released, especially on sunny days when the sun is out.

1. Add a layer to the ground, steps: first lay a layer of film and then make the cement floor will not be damp.

2. Paint the floor paint, steps: clean the ground thoroughly (especially the oil stain); Use coarse sandpaper to polish the smooth steps, and use epoxy cement to smear the potholes; After coarseness, sweep it with an oil-free cloth; Brush epoxy coal asphalt primer twice; Paint the floor in your favorite color for two.

3. If you feel that the cement floor is not suitable for painting floor paint, the humid air is easy to condense. A few pots of quicklime can be placed in the four corners of the room to absorb moisture.

I think we should make a higher foundation, so that we can solve it wellSecondly, we can also do some underfloor heating and the like.

First of all, it is necessary to install more windows, so that you can open the windows often for ventilation at ordinary times, and you can properly lay the foundation of the house higher.

In fact, you can use some wood materials as much as possible, and you can also design a hollow bottom underneath, so that it can prevent moisture and avoid some moisture.

Only when the house is decorated can we add some moisture-proof decoration and use some moisture-proof materials, so that the fundamental problem can be solved.

1.The humidity of the seaside is higher and more humid, whereas the sea breeze contains salt. Decoration materials should be moisture-resistant, although wooden materials (such as wooden doors, furniture) can also be used, but paint, coating must be good, in the decoration as little as possible ordinary steel, plywood.

Doors and windows should be made of double-layer tempered glass to prevent typhoons, and the furniture requires solid wood furniture with high density and has been dried. Bedroom flooring: If you choose a wood floor, the floor must be solid wood. The ceiling is made of Ette plate.

Use as little wallpaper as possible on the walls.

2.Seawater is very corrosive, so avoid using iron decoration materials when decorating, otherwise it is easy to rust. Then when the hydropower is renovated, stainless steel materials are also used as much as possible.

It is better to use high-density plastic for the wall socket cassette. Shower faucets can be considered all-steel.

It is necessary to pay attention to moisture-proof, waterproofing, some cleaning work, and also pay attention to the warmth of the house. You can choose some waterproof flooring, you can also choose some moisture-proof panels, you can choose waterproof paint, so that you can form a waterproof house.

When decorating, pay attention to choosing some moisture-proof materials, use dehumidifiers, and open doors and windows to ventilate the room when decorating; If you want to prevent moisture, you should choose some moisture-resistant materials, and try not to use steel and plywood.

When decorating, open windows for ventilation, try to choose some moisture-proof materials, and do not use ordinary steel; If you want to do a good job of moisture-proof furniture, you should choose some solid wood furniture, and try to let the room have air circulation.

What are the precautions for the decoration of seaside houses

Ocean view rooms generally have two windows facing north and south, which is more transparent, so at least one side can see the sea (or face the sea).

According to the experience of our permanent residents of sea view houses, we should pay special attention to the characteristics of the seaside in decoration, because the humidity is high, and some people are just temporary vacations, and the ventilation is not good, which is prone to various problems of destruction, and mold breeding is one of them.

Decoration materials should be resistant to moisture, although wooden materials (such as wooden doors and furniture) can also be used, but paints and coatings must be good; Most people choose moisture-resistant steel and wood doors and resin doors; The inner wall and top base layer need to pay attention to water isolation and moisture-proof, first treat the bottom layer with an interface agent, apply the scraping putty with good glue selection and strong adhesion, and the latex paint primer is best "mildew-proof and moisture-proof" type, and then paint the scrub-resistant surface coated latex paint, so as to ensure that there is no mildew, no peeling, not easy to fall off, and long service life. In order to be cheap, many people choose ordinary treatment methods and ordinary putty and latex paint, but as a result, mold grows in many places (especially in areas where you can't see sunlight) from the second year, and it is difficult to dispose of them.

In addition, the material and plating of the hardware of kitchen and bathroom equipment should also be corrosion-resistant, because the sea breeze contains some salt, bad material, irregular plating, it is easy to rust, and some use it for a year or two to rust, it has to be replaced, which is actually not cost-effective. Some of the so-called stainless steel parts are actually made of stainless iron for tableware, which can't resist moisture and salt spray corrosion.

Pay attention to moisture-proof, anti-corrosion, alkali resistance, and also pay attention to windproof. Because of the high humidity on the seashore, the sea breeze will carry the salt or alkali in the sea to the land with the wind, which is very corrosive. Dan or Xi Tuan.