Can latex paint walls be scraped with putty directly? How to buy latex paint for beginners?

Latex paint. Putty cannot be scraped directly.

Because the appearance density of latex paint is very high, it is not suitable for attaching to putty, if you directly batch putty to brush latex paint, it is recommended that before the new batch of putty, you should brush the glue once and then batch the putty, otherwise, the putty scraped up is not firm. Before scraping putty, check the construction of the wall to see if the appearance is uneven or there are cracks or falling off.

If this is the case, it must be repaired prior to construction. In addition, there must not be any impurities and dust on the wall. This process is mainly for the treatment of old walls, and the walls that have been used for a long time are prone to mold and fall off.

Before the construction of this kind of wall, the skin of the wall should be removed, and then nitpicking.

<> the effect of blowing putty and brushing latex paint may just not be ideal, blowing putty generally refers to the use of a kind of putty powder.

The putty decoration material can be filled with a treatment method, ** the appearance of the bottom of the uneven local putty. After processing, the wall will have the effect of lubrication and leveling, and the bottom processing is a vital link, the general latex paint, also known as synthetic resin emulsion coating, is an organic coating, a type of water-based coating prepared with pigments, fillers and various additives based on synthetic resin emulsion.

The best way to blow latex paint on the stuffy is to uproot the entire original latex. Because the latex paint tires have dried and there is no adhesion, the surface light coconut hanging on it can not condense on the latex paint, even if it sticks to it, if you blow the putty on it, and then go on the latex paint, I am afraid that it will fall off easily. Peel.

The best way to do this is to uproot the original latex paint and blow it again.

Do a detailed explanation of the problem for a detailed interpretation of the problem, I hope it will help you, if you have any questions, you can leave me a message in the comment area, you can comment with me a lot, if there is something wrong, you can also interact with me more, if you like the author, you can also follow me, your like is the biggest help to me, thank you. That's all for sharing, if you like me, please follow me. If you guys have anything to think.

No, the latex paint is waterproof, and it can't be hung with direct putty. Choose latex paint and choose a big brand.

The latex paint wall can not be directly scraped putty, which will make the wall uneven, novices must choose a big brand when buying latex paint, so the quality is ***.

When brushing latex paint, you can't scrape putty directly, you have to polish the wall several times before you can scrape putty, I personally recommend brushing latex paint, or ask a professional master to do it, because they brush more evenly.

1. After the putty powder dries, it can be painted.

If you want to paint the wall, you must do it after the putty powder has dried. If the putty powder is thicker, then it generally takes about half a month to paint normallyIn this way, it will not affect the effect of painting, otherwise the paint may be particularly thick and pitted, not particularly smooth, and will not be particularly good-looking.

Second, the role of painting.

If you paint the wall, you can prevent the putty powder from falling. Because when we go to someone's house, we may find that if we lean against the wall, then the clothes will actually become very whiteIt's because of the putty powder falling off, but if you paint the wall, it won't happen and it won't stain your clothes. And it's also easier to clean up when it's time to clean up.

3. Color diversity.

The color of the paint is particularly diverse, so it is better to choose, so that you can decorate the wall more beautifully. But when choosing, you must choose a brighter color, so the pressure of choosing is also brighter, if you choose to choose a dark color, then the home must be particularly dark,It won't look particularly good either. Therefore, the color choice of the game is also more important, and it is also the most important part for a decoration.

In this summary, you can paint the putty powder after it dries, so it can be painted directly, but there must be a time limit. Be aware that otherwise, the paint may fall off or be unpleasant. In this case, it is also more troublesome to repair.

Now it's all painted like this, paint directly on the putty, and you don't need to pay attention to anything to refresh, just pay attention to keep it flat.

It can be painted, and now it is painted directly on the putty wall, and the brushing of these two phases is relatively uniform and beautiful.

The putty wall can be painted directly, but it should be wiped several times to ensure its flatness.

I think you must pay special attention when brushing the machine, it must be very uniform, and it must be very beautiful when brushing out.

The bathroom wall can be painted directly, but be sure to apply putty a few times, and then paint after doing a few more putty.

Now the putty wall can be painted directly, and the putty wall painting must be done more than three times putty to paint.

Choose some small-smelling paint, brush it several times, and brush the wall smoothly, clean and tidy.

I think it still needs to be evened, I personally think there is nothing to pay attention to, or I hope to pay more attention to it.

Generally, no, because the quality of the putty on the wall itself is not up to par, you can judge it by gently rubbing the putty layer with your fingers, if you can easily scrape the putty powder layer off, it means that the quality is not up to par, and you need to clean up the original putty layer and reapply the putty; If it is difficult to scratch it off when rubbing it with your fingers, it means that the quality is passable, so you can directly apply latex paint.

1. To buy latex paint, you should choose a brand store and buy it through regular channels, which will effectively avoid being deceived, otherwise if you buy inferior or fake products, it will contain a large number of non-standard substances in it, and after brushing it indoors, it will lead to peculiar smell and even affect your health.

2. You can see the milky white effect after opening the can, if there is no precipitation after the switch, there is no agglomeration, and it is more delicate and silky to pinch by hand, without graininess, and then after stirring evenly, it will be in the shape of a line. That's basically no problem.

3. If the product has a pungent odor or a special fragrance, this should also be avoided, because there may be many chemical products that affect your health.

4. Judging the gloss, generally high-quality or qualified products are smooth and delicate to the touch, and look more shiny, while defective products are generally condensed or have poor water resistance, and it is easy to fade with a light touch.

It is best to scrape the old wall and then scrape the putty on the wall after brushing the latex paint, and the putty scraping process:

Base treatment: cast-in-place concrete wall, due to many reasons such as floor slabs, materials, separators, etc., the flatness of the wall is poor, and there are often pores, honeycombs, hemp surfaces, yin and yang angles are not smooth and bulging, so it is required that the convex places are smoothed and straightened, and the recesses should be filled and filled.

For the precast concrete floor slab and slab joint base, it must be brushed by a special person with a wire brush to remove the floating sand particles, pimples, dust and other debris on the surface. For the cement mortar paper reinforcement ash surface layer, the surface base layer is required to be dry, solid and clean (no floating soil oil stain).

If it is a whole wardrobe, you can do without latex paint. If you are installing a whole wardrobe after painting the wall, it is best to do latex paint.

Interior wall latex paint is a kind of coating with polymer emulsion as the film-forming material, and synthetic resin emulsion as the base material with pigments, fillers and various additives to prepare a kind of water-based paint. Interior wall latex paint is one of the main decoration materials for indoor walls and ceilings, which is characterized by good decorative effect, convenient construction, small environmental pollution, low cost and extremely wide application.

Yes, it's just that before re-approving the putty, you need to brush the glue first, and then batch the putty. Otherwise, the putty that goes up in the back batch is not firm.

It is best to remove the old wall and then scrape putty and paint the wall after being painted with latex paint. If you want to save money, polish the old wall with coarse sandpaper 1 time, and then scrape it 2 times with putty of better quality.

Yes, let's see if the original wall is cracked and hollowed, if there is no melting, you can scrape putty and brush latex paint, and it is good to dry coat.

1. It is best to remove the old wall and then scrape putty and paint the wall after brushing the latex paint. You can use an abrasive cloth to sand off the latex paint on the wall, then brush the putty, and then brush the latex paint.

2. Latex paint is the common name of latex coating, which was born in the mid-to-late seventies of the twentieth century, and is a large category of synthetic resin emulsion coatings represented by acrylate copolymer emulsion. Latex paint is a water-dispersible coating, which is made of synthetic resin emulsion as the base material, and the filler is refined by adding various additives after grinding and dispersing. Latex paints have many advantages that are different from traditional wall paints, such as easy to apply, fast drying, water resistance, and good scrub resistance.

In China, people are accustomed to use synthetic resin emulsion as the base material, water as the dispersion medium, adding pigments, fillers (also known as physique pigments) and additives, and the coatings made by a certain process are called latex paints, also known as latex coatings.

Latex paint on the scraping putty is not well adhered to.

Why scrape it off. If you stick mosaic tiles, it would be good to glue them directly.

Beautiful latex paint is also good for surface decoration, but people want to scrape putty directly on the wall, which is also needed.

You must know that the wall of latex paint in the early stage is also very beautiful, but you can't scrape putty directly, otherwise it will affect the effect of decoration. It is also not good for decoration.

It is best to remove the old eggplant wall first, and then remove the putty and paint. You can use an abrasive cloth to wipe the latex paint off the walls, then rub the putty and then apply the latex paint.

Latex paint is the common name of latex paint, latex paint wall can be scraped putty can latex paint is a kind of synthetic good material represented by acrylic copolymer emulsion, liquid binder, filler is a variety of additives refined by grinding and dispersion coatings. Compared with traditional wall paints, latex paint has many advantages, such as brushing, latex paint wall can be directly scraped putty for quick drying, water resistance and scrub resistance. First shot.

Look at the appearance. Eco-friendly latex paint should come with a product, so make sure you have it when buying a product. A common latex paint brand now includes an environmental test report or test sheet. When making an enterprise environmental test report.

To check the weight and quality of the latex paint, weigh the weight and listen to the sound. Green latex 5 liter bucket is about 7kg. Barrels of 18 liters are about 25kg, and if they are heavy, weigh them so that they can be recorded there.

It is also necessary to lightly apply the sound of the paint bucket shaking to the green latex and then shake the sound of them if the paint proves to be insufficiently viscous next time.

Practical checksIf you can open the jar, you should check the viscosity, odor, flow, and adhesion of the latex paint. After the sticker exceeds a certain amount of agglomerate in the normal green latex, the odor, latex, or quality issues can also touch a small amount of fingers after stirring the paint bucket. Explain what is emulsion liquid and what is soft, delicate to the touch, good paint fineness, a little dry, otherwise clean moisture, such as clean fingers, good adhesion, poor adhesion.

When the latex paint wall is renovated, the construction should not be sloppy.

You can get it for free

Summary. Yes, the wall surface that has been painted with latex paint can be scraped directly with putty. Putty fills in the subtle defects of the wall and makes it smoother.

However, before you start, you need to make sure that the latex paint layer is dry so that the putty can adhere to the wall. If the latex paint has not dried completely, it may cause the putty layer to blister or peel off. So before scraping putty, make sure that the latex paint has dried sufficiently.

Yes, the wall surface that has been painted with latex paint can be scraped directly with putty. Putty fills in the subtle defects of the wall and makes it smoother. However, before you start, you need to make sure that the latex paint layer is dry so that the putty can adhere to the wall.

If the latex paint has not completely dried out, it may cause the putty layer to blister or fall off. Before scraping putty, make sure that the latex paint is fully dried.

Can you tell us more about that?

After making sure that the latex paint is completely dry, you can directly scrape the putty to fill in the subtle defects in the wall and make it smoother.