Can the wall after waterproof paint be brushed with putty?

OK. Brushed with waterproof paint.

After that, you can scrape the putty directly.

High, good elongation performance, strong ability to adapt to cracking and deformation of the base layer; Ready-to-use, easy to construct and effectively shorten the construction period; With water as the dispersion medium, water-based and environmentally friendly.

Waterproof treatment steps: Remove all the original ash on the wall. Then brush the waterproof paint, it is best to do waterproof several times, and then scrape the putty powder.

Finally, paint the walls.

First, if it is a waterproof coating directly brushed on the cement wall, it is okay to batch putty, and second, if there is already a putty base layer and then brush the waterproof coating, so that the putty can not be scraped directly on the top, and it will fall off if it does not stick, and it will be more troublesome at that time. If you want to do it well, redo the waterproofing process, which is to repaint the waterproof paint first. Come 2 3 times, then brush putty powder, and then finally paint the wall.

The effect is very good, beautiful and durable.

If you want to know more about coatings, it is recommended to consult Keshun home waterproofing. Keshun home waterproof is a brand of Keshun Minjian, a wholly-owned holding company of Keshun Co., Ltd., with strong strength. The products cover waterproof coatings and tile adhesives.

In the categories of sewing agent, reinforcing agent, membrane, putty and other categories, Keshun Home Waterproof is committed to creating six major decoration waterproof paving systems for home decoration kitchens, bathrooms, exterior walls, balconies, roofs and pools, and professionally solving the waterproof paving problems in various areas of the family. Check out the future waterproof market dividends.

After brushing the waterproof paint, the wall can of course also be painted with putty. Brush putty powder, and then finally paint the walls. The effect is very good, beautiful and durable, and will not fall off.

If the wall surface is very smooth after brushing the waterproof paint, or even the putty powder should not be used, you can directly brush the latex paint.

If you want to scrape putty or paint after brushing the waterproof coating, you can't, because the waterproof paint and putty are not together, so you can only remove the anti-counterfeiting paint and scrape the putty or do a full paint from scratch.

The waterproof layer is done, no need to apply putty powder, the putty powder tile is not sticky, and if it is a tile, the waterproof layer should not be thick, otherwise the tile is easy to fall off, after the waterproof layer is done, directly with plain cement slurry, and then in the brick.

It is determined according to the material of the waterproof material.

Yes, depending on your practical needs for the wall, remember to wait for the wall to dry and clean up the foreign objects before painting.

After scraping the waterproof putty powder on the wall, it is possible to brush the waterproof coating.

In the process of wall decoration, putty powder construction and selection are very important. Improper construction of putty powder or insufficient quality will cause cracking of the exterior of the building wall, which will lead to the shelling and falling off of the coating, and sometimes even cause water seepage on the wall, which seriously affects the decoration and protection function of the coating.

Water resistance is often an important sign to determine the quality of putty, and putty with good water resistance not only has good adhesion under mildew and moisture conditions, but also has great help for the film formation of the coating on its surface. Look at the anti-counterfeiting brand putty powder manufacturers generally have a strong sense of anti-counterfeiting, in order to prevent products from being counterfeited, there are anti-counterfeiting measures.

Summary. Generally speaking, putty treatment can be carried out after the wall is brushed with waterproofing, but the following points need to be noted:1

Wait for the waterproofing material to dry through: Before applying the putty treatment, you need to make sure that the waterproofing material is dry enough so as not to affect the adhesion and effect of the putty. 2.

Choose the right putty: Since the texture and color of waterproof paint are relatively rough, it is necessary to choose putty with higher viscosity and apply it multiple times to achieve a smooth effect when carrying out putty treatment. 3.

Pay attention to the thickness of the brush: the thickness of the putty treatment should be appropriate, too thick is easy to cause cracking, too thin is not easy to achieve a smooth effect. It is recommended to perform a trial coating before putty treatment to ensure that the effect meets the requirements.

Generally speaking, putty treatment can be carried out after the wall is brushed with waterproofing, but the following points need to be noted:1Wait for the waterproofing material to dry through:

Before applying putty treatment, it is necessary to make sure that the waterproofing material has dried thoroughly so as not to affect the adhesion and effect of the putty. 2.Choose the right putty:

Due to the rough texture and color of waterproof coatings, it is necessary to choose putty with higher viscosity than Maoxiao when carrying out putty treatment, and apply it many times to achieve a smooth effect. 3.Pay attention to the thickness of the brush:

The thickness of the putty treatment should be appropriate, too thick can easily lead to cracking, and too thin is easy to achieve a smooth effect without digging the manuscript. It is recommended to perform a trial coating before putty treatment to ensure that the effect meets the requirements.

In short, before the putty treatment, it is necessary to consider the dryness of the anti-water-loading material, the selection of putty and the thickness of the brush, so as to ensure that the treatment effect reaches the expected rounding stove.

Summary. Hello, the wall can be scraped putty after being brushed with waterproof paint. Waterproof coatings are generally used for wall moisture-proof and waterproof, while putty is used for wall repair and smoothing.

The roles of the two are different, but they are not in conflict. After brushing the waterproofing paint, if putty treatment is required, you need to wait for the waterproofing paint to dry completely before proceeding. Otherwise, the putty will react with the waterproof coating, causing problems such as blistering and cracking on the wall.

Hello, the wall can be scraped putty after being brushed with waterproof paint. Waterproof coatings are generally used for wall moisture-proof and waterproof, while putty is used for wall repair and smoothing. The roles of the two are different, but they are not in conflict.

After brushing the waterproof coating, if putty treatment is required, you need to wait for the waterproof coating to dry completely before hitting the bright bush. Otherwise, the putty will react with the waterproof coating, resulting in problems such as blistering and cracking of the cherry blossoms on the wall.

After the wall is painted with waterproof paint, it is also necessary to pay attention to the following sources: 1Waterproof coatings need to be judged or evenly applied to avoid missing brushes and overlapping.

2.Waterproofing coatings need to be treated according to the drying time specified by the manufacturer to avoid premature further work. 3.

Before brushing the waterproof coating, the wall needs to be cleaned, sanded and other treatments to ensure that the wall surface is smooth and dust-free.

The waterproof coating can be scraped putty, the adhesion of the putty is very strong, you can operate on the waterproof coating, before the operation, you should pay attention to the cleaning of the wall, there can be no stones, no dust, pay attention to the inclination of the operation, to achieve uniform force, so that the putty is in a full state, to avoid the cracking caused by uneven painting.

1. The steps of decoration are to polish the wall first, then carry out the painting of the waterproof coating, the whitewashing of the putty layer, and finally the brushing of latex paint, which can be carried out after brushing the waterproof coating, but the putty can not be coated with waterproof paint after scraping, and the putty layer is particularly smooth and smooth, and the waterproof coating cannot be brushed.

2. When brushing the waterproof coating, the cement wall should be cleaned to ensure that the cement wall is in a smooth state, the sediment on the wall should be removed with a blade, the wall should be washed with water, and the wall should be thoroughly dried.

3. The work of scraping putty should be uniform, so far it is manual operation, the machinery can not scrape putty on the wall, and the elasticity of the scraper and putty should be used to coat it, so as to ensure that each scraper is seamlessly connected, and there will be no stubble, after scraping, it is necessary to polish, and then the operation of the second layer is carried out after the first layer is thoroughly dried, and the work of scraping putty needs to operate three layers, and each layer must wait until the previous layer is completely dry before grinding.

Remove all the dust from the wall. Then brush the waterproof paint, it is best to do waterproof several times, scrape the putty powder again, and finally brush the wall paint.

First, if it is a waterproof coating directly brushed on the cement wall, it is okay to batch putty again.

Second, if there is already a putty base layer and then brush the waterproof coating, so that the putty can not be scraped directly on the top, and it will fall off if it does not stick, and it will be more troublesome at that time.

A two-component waterproofing material consisting of an acrylic emulsion and additives is combined in a specific ratio with a powder consisting of cement, sand blending and mineral powder. After the two materials are mixed, a chemical reaction occurs, which not only forms a surface coating waterproof, but also penetrates into the base material to form a crystal to block the passage of water, so as to achieve a double waterproof effect.

After brushing the waterproof paint, you can directly scrape the putty and brush the latex paint.

Yes, because it is generally brushed first waterproof in the tile or something.