-
Send it back to the original factory to replace the screen, or if it is too expensive, you can find a certified repair point.
-
The solution to the light leakage phenomenon in the Apple mobile phone:
First, find Apple's customer service for maintenance, the method of maintenance quality is ***, the accessories used are official channel accessories, but ** more expensive.
Second, repair it yourself. After buying screen accessories, you can disassemble the screen for maintenance by yourself, which is the cheapest, but the quality of maintenance is not guaranteed.
Third, find some third-party maintenance companies for maintenance, ** cheaper than the official, the channels of the accessories used are unknown, and there is a gap between the maintenance quality and the official maintenance.
-
The screen leakage of the Apple mobile phone is caused by not being installed properly, or the structure of the mobile phone itself is damaged when it is disassembled.
How to deal with light leakage on the screen of Apple mobile phones:
Check the light leakage of the iPhone phone, hold the phone upright, and look at it from top to bottom with a certain angle of inclination, or look at the four corners of the phone in a dark environment;
If you feel that the light leakage of your iPhone will affect your experience of using your phone, then for now, the best solution is to bring your relevant products to the nearest after-sales service center for repair;
For general prefecture-level cities, there are basically Apple stores, and you can bring your mobile phone and the invoice or warranty certificate related to your purchase of an Apple mobile phone to the store for repair.
Generally speaking, if the light leakage is not very serious, after-sales maintenance can be solved, and it is also the most convenient and labor-saving method, if the light leakage is very serious, you can also ask to change the phone, directly change a mobile phone of the same model.
Because it is a problem with the mobile phone itself, Apple also supports replacement, everyone only needs to back up the things in the mobile phone, bring their ticket purchase vouchers to the store for a new mobile phone;
After changing to a new mobile phone, you should also check it in time to see if there are some new problems, or whether there is still a phenomenon of light leakage, and you can use the new mobile phone after confirming that it is correct.
It is recommended to bring your mobile phone to the regular Apple customer service center for inspection and repair.
-
1. The screen of Apple 6 generally does not leak light, but due to the limitations of LCD screen production technology and the poor sealing of the mobile phone during installation, it may cause light leakage on the screen.
2. If there is only a slight light leakage, it is a normal phenomenon, and it will generally not affect the normal use, so you can ignore it and continue to use it.
3. If the light leakage problem is serious and affects the normal use, you can contact Apple's official after-sales service for testing and replacing the new machine.
-
Maybe it's leaking,I've seen an Apple 6 on the edge of the display time at the light leak,Light leakage refers to the edge of the screen with a brighter point or cluster with other places。
-
Your apples are leaking??? Congratulations on the renovation.
-
Generally speaking, the problem of light leakage on Apple mobile phones does not affect the relevant functions of the mobile phone and its normal use.
If you feel that the light leakage of the mobile phone screen will affect your experience with the use of the mobile phone, then the best way is to bring your mobile phone to the nearest after-sales service center for repair. Generally speaking, if the light leakage is not very serious, after-sales maintenance can be solved, and it is also the most convenient and labor-saving method, if the light leakage is very serious, you can also ask to change the phone, directly change a mobile phone of the same model.
Screen light leakage is due to the screen and the backplane bezel packaging is not tight, failure or aging caused by the screen edge of the light, on the solid color background of the LCD panel local whitening phenomenon, the detection method is to adjust the screen to monochrome, you can know after observation.
-
Clean up old glue and dust.
When cleaning, use a suction cup to absorb the screen and slowly pull up the obvious gap between the screen, and use a brush to clean up the old glue and dust, so as not to reach the inner screen to avoid damage.
When gluing and gluing, use a suction cup to absorb the screen and slightly pull up the gap of the screen, and use the screen glue to squeeze the glue into the gap about 1mm wide, pay attention to control the amount of glue, and do not stick the needle into the gap.
After the gel is glued, fix the screen at the gluing position with a clip, put it in a cool and ventilated place at room temperature, do not remove the clip during the gel process, the gel surface only takes 4-6 minutes, and the curing is recommended for 3-4 hours, which is more fixed.
-
The scientific name of this black border is the BM area. The main function is to prevent light leakage on the display, if the display screen does not have a BM area or the BM area is not enough, you will see a noticeable halo. This annoying black bar exists for no reason, this black bar is a design problem, and the scientific name is the BM region.
The main function of the BM area is to prevent light leakage on the display, if the display screen does not have the BM area or the BM area is not enough, you will see obvious halos. Because even if it is the same model of mobile phone, each mobile phone will have a slight error when assembling, it is impossible to achieve perfect alignment, if the outer frame of the screen is aligned with the visible edge of the BM area, there will be a colored light on the edge of the bezel, and there is more likely to be light leakage.
Another reason is the space between the inside and outside of the screen of the mobile phone, resulting in another kind of black bar, because the display design is generally divided into two layers, and there is a certain distance between the inner display and the protective glass, and the spacing will naturally produce dark shadows.
If the problem does not solve your problem, it is recommended that you bring your phone to an Apple customer service center for repair.
-
This situation generally belongs to the installation is not installed.
It is best to go to an Apple repair shop immediately to repair the iPhone light leak to avoid causing more damage to your phone.
-
What machine to buy? Is it a national trip? If it should still be under warranty, it is recommended not to disassemble it yourself, but to go to the Apple store to test it.
-
Hello, 1, this should be exchangeable.
2. You can bring the purchase invoice to the after-sales service, which is a screen quality problem.
-
Go to the official after-sales inspection and repair.
Step 1: Before you start the operation, if the "Find My iPhone" in iCloud on your iPhone7 phone is turned on, you must know the Apple ID and its password, otherwise the phone will not be activated after the system is restored. If you don't know the password, it's best to stop doing the following. >>>More
Screen light leakage. It is almost unavoidable, and most of them are caused by the panel installation not being elaborate enough. Since the light leakage caused by the bezel will basically not affect the normal use, no manufacturer will replace it. >>>More
First of all, in terms of screen, Apple's iPhone has always used the best IPS screen, with high color saturation, and the use of DCI-P3 wide color gamut, the display effect is very good, and it can be seen clearly even in sunlight. >>>More
Method steps.
If pressing any key does not respond, and long pressing will not turn off the computer, you need to force restart according to the steps below. >>>More
Method 1. 1. First find the software you want to uninstall on the desktop of your phone. >>>More