What are the consequences of accidentally connecting the gas water heater to the wrong gas pipe duri

As a result, the underground pipe is waterlogged, and the whole building is out of gas. In such a situation, close the gas valve and water valve at home as soon as possible. Call the gas company** and have a professional see if there is standing water in the riser.

The place where the gas pipeline interface is a tee, after the valve of the gas meter is closed, it is very simple to connect a tee at the end of the gas pipeline, and it is a rubber pipe between the tee and the gas water heater, which is simpler. The consequences of its damage are too severe. And the quality of accessories, installation methods, environmental requirements are very high, not a gas company, a safety accident is not a small accident, the first will be held accountable for the water heater sales business and the gas company, if it is a gas company that is connected by itself, it is not responsible.

<> In accordance with the relevant regulations of the national gas, the installation unit must have the corresponding qualifications and assume the corresponding responsibility for the installation safety. It is recommended to choose a regular installation unit. Previously, it was to bring the original and copy of the owner's own ID card, bank collection, purchase contract or real estate certificate to the counter of the nearby gas business hall to open an account.

Units that repair permits can install indoor gas pipelines, but without the consent of the gas company, install it yourself, the gas company will not ventilate you, and the other mouth is connected to the water heater, with a roll of raw meal tape, and the gas nozzle can be replaced, and the single-head gas outlet of the gas company can be replaced; Before buying another *** connection, the non-gas installation part should be accepted and the pressure qualification test should be carried out. Here's the basis"Regulations on the management of urban gas"The rights granted to the gas ** enterprise must also be installed in accordance with the requirements of the gas company, otherwise it cannot be opened by the gas company.

Some gas companies do not allow self-extension (if you want to extend, after the user applies, the gas company arranges its employees to provide door-to-door service (to charge relevant fees), the fact is the truth, if you want to be happy, you will experience happiness, if you want to be angry, you will experience anger. Choose, good boy.

It can happen that there is gas coming out of the faucet when you turn it on, which is dangerous. It is best to install it from the new, and after connecting, it is necessary to do a pressure test test, use a pressure test pump to maintain the pressure for pressure test, and observe whether there is water seepage.

It may lead to the failure of household appliances, and serious situations may lead to **, and you must be careful when decorating.

It may cause **, it must be installed safely, otherwise it will cause great danger.

Due to the burning of the house

The gas pipeline is a low-pressure pipe.

If you connect the water inlet pipe of the hot water dao device to the right valve of the gas pipeline, as long as the water is opened, the water pressure is greater than the air pressure, and the water will enter the gas pipeline! Generally speaking, if this situation occurs your gas meter must be flooded, if it does not affect the meter, then the water is discharged, if it affects you may have to pay for a new meter, this is still a better result, if there is too much water, the water flows to other users or the main riser when it is troublesome!

This kind of thing depends on the situation, if your building is out of gas due to the wrong pipe in your household, the gas company will definitely ask for a penalty, don't care too much about this kind of thing, who hasn't made a mistake, quickly contact the gas company, let them deal with it, and minimize the loss.

Excuse me, how did you deal with it in the end?

No, it's just that the water heater inlet and outlet pipes are installed upside down and can't be used, if the water pipe is not connected wrong, the faucet on the balcony of the water heater will have cold water if you don't open the water inlet valve.

When filling the water, you must open the water outlet and wait for the air in the inner tank to be completely discharged before checking whether the water is full. In the case of a blockade device, the inlet valve must be open during heating. When you first open the valve, do not turn the water outlet in the direction of the human body.

When the electric water heater is working, the water heater must be filled with water first. Turn on the water heater outlet switch (shower), turn on the water inlet switch, and the water will be automatically pressed into the inner tank. When there is a continuous flow of water from the outlet, it proves that the water has been filled.

When the gas water heater is installed, will the water heater be broken if the water inlet pipe is connected to the air inlet pipe by mistake, and what are the potential safety hazards?

Dear, I am glad to answer for you: When the gas water heater is installed, will the water inlet pipe be connected to the air inlet pipe by mistake, will the water heater be broken, and what are the potential safety hazards? A: Hello, dear! <>

If it will not break, it will cause damage to the gas gauge and pressure regulating facilities; If the water ingress time is long, it may also lead to the water blockage of the entire underground pipe network, resulting in a large-scale gas outage. If the inlet pipe refers to the water in the transport will definitely not ignite the fire, in addition to the air pipe embroidery, such as the water inlet pipe into the air intake, first close the intake valve, remove the air intake connection of the water heater, open the window, let the natural gas volatilize in the book, blow off the water inside, or natural drying, can not use a hair dryer to blow the ** disaster, there is residual gas in the pipe, after the pipe water is dried, connect the natural gas pipe to let the air pressure blow the water inside, in Lianzhou teaser water heater intake pipe hope my reply can help youIf you have any follow-up questions, please feel free to ask, and I will reply to you as soon as possible. <>

Summary. Hello dear! There is no penalty for water ingress, but compensation is required.

If it's just your own gas meter with water, it's fine, as long as you change your own meter, if the water enters the main pipeline, it will be troublesome if someone else's gas meter also gets water. It is necessary to lose money, if it is installed by the person arranged by the water heater manufacturer, then you can find them to claim compensation, if you install it yourself, then you can only pay for it yourself. I hope mine can help you and have a great day.

When installing a water heater, how to deal with the water inlet caused by the wrong connection between the gas pipe and the water pipe! Will there be penalties?

Hello dear! I have seen your question here, and I am trying to sort out the answer, and I will get back to you in five minutes, please wait a moment!

Hello dear! There is no penalty for water ingress, but compensation is required. If it's just a self-bending of your own gas meter into the water, it's okay, as long as you change the meter you added, if the water enters the main pipeline, it will be troublesome if someone else's gas meter also enters the water.

It's going to lose money, if it's the person who installs it by the water heater manufacturer, you can find them to claim compensation, if it's installed by yourself, then you can only pay for it. I hope mine can help you, and I wish you a happy life.

Summary. If the wrong connection of water pipes and gas pipes will lead to water ingress, it should be dealt with in time, and the position of water pipes and gas pipes should be adjusted to ensure that water pipes and gas pipes will not be connected incorrectly. According to the Regulations on the Safety Supervision and Administration of Construction Sites of Construction Projects, those who fail to carry out construction safety inspections in accordance with the regulations and cause safety accidents shall be investigated and fined in accordance with the law.

As a result, water ingress caused by the wrong connection of gas and water pipes during the installation of a water heater may result in penalties if construction safety inspections are not carried out in accordance with the law.

When installing a water heater, how to deal with the water inlet caused by the wrong connection between the gas pipe and the water pipe! Will there be penalties?

If the water pipe and gas pipe are disturbed and the pipe is connected incorrectly, it should be dealt with in time, and the position of the water pipe and gas pipe should be adjusted to ensure that the water pipe and gas pipe are connected incorrectly and no water will enter the situation. According to the Regulations on the Safety Supervision and Administration of Construction Sites of Construction Projects, those who fail to carry out construction safety inspections in accordance with the regulations and cause safety accidents shall be investigated and fined in accordance with the law. Because of Li Kai's case, the gas pipe and water pipe were connected incorrectly when the water heater was installed, resulting in water ingress, and if the construction safety inspection was not carried out in accordance with the law, Ke Qi Neng would be punished.

The smart water heater misconnects the cold water to the air pipe. What to do?

First of all, keep an eye on the file, and turn off the power of the smart water heater. Then, pull the cold water hose out of the air hose and properly connect the cold water hose back to the cold water inlet. After the most Xun Xun, the intelligent type can be powered on again.

What should I do if water enters the gas pipe of the smart water heater?

If the gas pipe enters the smart water heater, first of all, Yamaga should immediately disconnect the power supply to avoid accidents. Then, turn off the source of the gas, drain the water from the pipe, and carefully inspect the inside of the water heater to check for damaged parts. If a damaged part is found, the poor pin should replace it in time to ensure the normal use of the smart water heater.

Wow, it's more powerful, get an air pump, blow it, the carpentry air pump can be, you have to dry all the water in the gas path, there should be no problem.

The water inlet and the gas inlet are too different, how can they be connected wrongly.