What should I do if the wall skin falls off? How to deal with the peeling off of the wall skin

In this case, we must first figure out whether the surrounding wall skin is also hollow, if the hollow drum needs to be completely eradicated and painted, otherwise, there is no need to repair a large area, only repair the detached place.

If the wall skin is only partially peeled off, then we can remove the problematic area, then smooth the edges, and then scrape a new layer of putty, apply primer, and brush well, which may have some color difference with the original wall; If you don't want to do this, then we need to do a reinforcement for the base layer, the original wall surface is removed to the base surface, and then repainted with a solid primer or interface agent, and the wall surface should be smoothed after polishing 3 times according to the previous painting wall, so that the quality of the base layer will become much better.

If you don't like these two methods, then you can choose to use the way of painting and covering to solve the problem of wall peeling, soak a piece of the wall peeling with water, shovel it clean, if there is no chalking or falling off, it means that the quality of the original putty layer is better, and you can use fine sandpaper to polish and brush the primer and paint surface, which will save a lot of trouble.

Although this method is simple, it is still necessary to deal with the base layer first, so that it can be more convenient to use, if you want to repair the peeling wall skin by yourself, it is best to consult the seller when buying the wall paste and wall paint to learn the operation method of the wall, so that the wall will not be destroyed, and the trouble will be directly found by a professional, which will be more convenient.

If you think it is more troublesome to do this, then you might as well try to use the wall sticker, this method is more suitable for friends who are more humid at home, because the damp home even if the new paint has just been painted, it will also appear here because of the passage of time, so we can try the wall sticker This method, although there are many types of wall stickers, but they can effectively protect the wall, prevent moisture and repair the phenomenon of wall skin falling off.

Judging from the figure, it should be caused by the poor adhesion between the putty and the plastering layer, the estimated amount is not small, it should be the putty quality problem, it is recommended to remove all the putty, and re-scrape the putty to brush the paint, so that once and for all, the problem is completely solved.

You can buy a special wall paint.

1. Clean the peeled wall. 2. Coated with isolation sealant. 3. Batch scraping of water-resistant putty paste. 4. Use sandpaper to polish the wall flat. 5. Paint latex paint.

If the wall skin is only partially peeled off, then we can remove the problematic area, then smooth the edges, and then scrape a new layer of putty, apply primer, and brush well, which may have some color difference with the original wall; If you don't want to do this, then we need to do a reinforcement for the base layer, the original wall surface is removed to the base surface, and then repainted with a solid primer or interface agent, and the wall surface should be smoothed after polishing 3 times according to the previous painting wall, so that the quality of the base layer will become much better.

If you don't like these two methods, then you can choose to use the way of painting and covering to solve the problem of wall peeling, soak a piece of the wall peeling with water, shovel it clean, if there is no chalking or falling off, it means that the quality of the original putty layer is better, and you can use fine sandpaper to polish and brush the primer and paint surface, which will save a lot of trouble.

Although this method is simple, it is still necessary to deal with the base layer first, so that it can be more convenient to use, if you want to repair the peeling wall skin by yourself, it is best to consult the seller when buying the wall paste and wall paint to learn the operation method of the wall, so that the wall will not be destroyed, and the trouble will be directly found by a professional, which will be more convenient.

If you think it is more troublesome to do this, then you might as well try to use the wall sticker, this method is more suitable for friends who are more humid at home, because the damp home even if the new paint has just been painted, it will also appear here because of the passage of time, so we can try the wall sticker This method, although there are many types of wall stickers, but they can effectively protect the wall, prevent moisture and repair the phenomenon of wall skin falling off.

1. If the area of the wall skin is not very serious, you can tear off the wall skin, and then apply it again with putty water, and then use a certain scraping tool to scrape it flat. 2. If the peeling off of the wall is very serious, it is recommended that the user remove the wall to the base position of the wall, and then re-apply the falling wall with an interface agent, and re-repair and scrape with the special gypsum and scraping tools for wall stucco, and stabilize it within three times. 3. Remove the wall surface with the most serious peeling off of the wall skin, and then ask the decoration company to come to decorate.

Relevant knowledge popularization: In the process of wall decoration, a comprehensive inspection and cleaning should be carried out on the base layer to ensure that there is no place to repair the base wall, and then the overall wall should be wetted. After that, the wall is applied with special wall painting tools and materials to ensure that the application is smooth and smooth.

Then use putty water with a special scraping tool to scrape the surface comprehensively, pay attention to the number of scraping, should not be more than three times. After the comprehensive application with a roller, before the application should pay attention to the proportion of materials and water, to ensure that the proportion configuration is in line with the wall painting, in this process, the decoration workers need to achieve the uniformity of the wall painting, in order to prevent the wall surface in the later stage of the uneven situation.

If the inner wall skin of the rental house falls off due to the quality of the house, and the outer wall skin falls off, the lessor shall perform the maintenance obligation in a timely manner, and the lessee who refuses to maintain may request to terminate the lease contract; If the interior wall of the rental house falls off due to the tenant's improper use of the house, the tenant shall perform the maintenance obligation on its own, and the lessor shall be liable for compensation if the actual loss is caused.

[Legal basis].

Article 711 of the Civil Code If the lessee fails to use the leased property in accordance with the method agreed upon by Shanlu or according to the nature of the leased object, resulting in losses to the leased object, the lessor may terminate the contract and claim compensation for the loss. Article 712 The lessor shall perform the maintenance obligation of the leased property, unless otherwise agreed by the parties. Article 713 When the leased property needs to be repaired, the lessee may request the lessor to repair it within a reasonable period of time.

If the lessor fails to perform the maintenance obligation, the lessee may repair it by itself, and the maintenance cost shall be borne by the lessor. If the use of the leased property is affected by the maintenance of the leased property, the rent shall be reduced or the lease term shall be extended accordingly. If the leased property needs to be repaired due to the fault of the lessee, the lessor shall not bear the maintenance obligation provided for in the preceding paragraph.

Article 714 The lessee shall properly keep the leased property, and shall be liable for compensation if the leased property is damaged or lost due to improper storage.

If it is the most common white painted wall or bare wall, use a tool to clean the peeling parts, scrape off the putty, and then slowly fill in the new putty, of course, if the peeling of the house is particularly serious, almost half of the wall has been damaged, then there is no salvation, or hand over a painter, the whole piece is scraped again and again.

Some houses have been twenty or thirty years old, originally believed to sell well, but suddenly began to molt on a large scale for a period of time, the reason for this is nothing more than the moisture-proof nature of putty Pi Pei powder has reached the limit, generally this peeling is accompanied by fluffing, to deal with this kind of problem, that is, to re-process the base surface of the wall, first find a tool to remove the entire base surface, and then use the plaster material to level, if necessary, you can also add anti-crack mesh cloth to the wall, Because the load-bearing wall of the old house itself is generally moisture-proof, so the money for scraping the wall lining can be arranged with a mesh cloth inside to ensure that the new base layer can stand firm on the slippery wall, and then the overall wall is repainted through ordinary craftsmanship.

This answer applies to the method of peeling off the wall.

We know that many times due to various reasons, the wall skin will fall off some phenomenon, so at this time to find the reason, and then ask the build to deal with it according to the reason, the following will introduce to you how to repair the wall skin falling off.

1. Deal with the old wall, scrape the putty, if the wall is partially peeled, only need to remove the peeling part, a small range of scraping putty. If it is a large-scale peeling, it is necessary to remove all the peeling of the wall surface and scrape the putty again.

2. Strengthen the base layer, if the wall is peeling off in a large area, it is necessary to consider whether there is a problem with the bottom layer of the wall. Then, when it is necessary to refresh the wall with Gordon during construction, reinforce the base with a reinforcing agent, and then follow a series of steps such as plaster leveling, mesh cloth, primer painting and painting.

3. Brush the topcoat to cover the cracks, if the wall is not chalking or falling off, for the peeling is not very serious, you can directly paint the topcoat to cover.

4. Demolish the old wall and install a new wall, this method is mainly aimed at the serious situation of the wall peeling, and the simple repair cannot meet the demand, so it is necessary to remove all the decoration of the old wall and re-decorate.

How to prevent the wall skin from falling off.

1. Many people think that the putty layer made by the developer is very good, in order to save the budget, do not make changes, many times, this putty layer is to cover up the cracks and hollowing on the wall, in order to meet the acceptance standard, the strength and service life of this layer of putty are not up to the standard of home use, so when starting work, shovel off the putty layer as much as possible, and then do the base treatment.

2. Many of the hollow drums and cracks in the original wall are not cared for, thinking that they can't see it when they are painted with latex paint in the later stage, which is also a wrong practice. In the case of hollow drums, it is necessary to knock them off with a hollow drum hammer first, and then fill them with cement and mortar; If there are cracks on the surface, it is necessary to treat them with caulking tape first, so that the small details of the wall can be dealt with well, and it is more convenient to deal with the wall in the later stage, so as to effectively avoid cracking on the wall.

3. Before scraping putty on the wall, we should also pay attention to the use of interface agent and wall solidification, and the new home is still more suitable for choosing interface agent, which can help us closely connect the original wall with the later putty layer to avoid the situation that the wall surface falls off.

Summary: How to repair the wall skin peeling off related content is introduced here, the above to introduce you to several ways to repair the stupid balance, in the treatment of the actual situation or according to the actual situation, so that the treatment will be more reasonable.

1. Eliminate the peeling part, scrape the putty again, smooth the edge of the shovel, scrape the putty again, and brush the primer again. 2. Strengthen the base layer, if the local peeling is serious, move the original wall to the base layer of the wall, and then reapply it with sealing primer, and carry out three plastering, polishing and smoothing treatments. 3. Paint and cover the original wall directly, select the most serious part of the wall surface to fade, and shovel it off.

4. Then level the wall, solidify the base layer of the wall, brush the wall with interface agent, scrape the waterproof putty three times and then grind the wall, and finally brush the wall paint twice.

1. If the wall skin is not good to shovel, then it may need to be sanded with sandpaper, and the original wall surface needs to be polished slowly, which is conducive to the good adhesion of the painted paint to the wall.

2. The choice of materials is the most critical, and you must choose the best materials. Because the wall is prone to some problems, we need to choose products with qualified quality, especially wall materials, paints and putty powders. If the quality of the materials selected for the renovation is not up to the standard at the beginning, the later repair work will be very difficult.

3. When we paint the wall, we must pay attention to grasp the quality and material source in the early stage, and at the same time, we must strictly control the construction process in the construction process, which can prevent cracks on the wall and some details from occurring.