What should I do if the skin on the bedroom wall falls off, and what should I do if the skin on the

The peeling on the bedroom wall is thought to be the putty bulging and falling off, and the treatment is:

Remove the original putty, then polish the roughness and scrape the adjusted putty again. 2. The bedroom wall is peeling, and after the original putty is replenished, it is necessary to check whether there is a water leak near the room, and repair it after finding it, or .

There is a resurgence of moisture in the corner of the wall, because a large part of the original fall off is because the air humidity is too high.

Hope it helps.

You can try the following:

1. Scrape the peeling part and scrape the putty.

If the white wall or bare wall is partially bulging or slightly cracked and peeling, you can remove the problematic place, and smooth the edge of the shoveled part, scrape the putty again, apply primer, and brush again, but there may be a little color difference with the original wall.

2. Professional reinforcement treatment for the grassroots level.

For the case of severe local spalling, it is necessary to consider whether the wall base is not done at all. Remove the original wall to the base layer of the wall, repaint it with an interface agent or sealing primer, and then polish it according to the plaster leveling, paste the mesh cloth (reinforcement and crack prevention), and scrape the wall lining three times, and the quality of the entire base will be much better at this time.

3. Directly roll the brush topcoat to cover the part.

If it is a simple fading, it is generally recommended to take the way of a roller brush to cover a new round of primer and a similar topcoat, but before construction, it is necessary to judge the quality of the putty layer of the wall at this time: choose the worst piece of the wall to fade with water and then use a shovel to produce a shovel, if there is no chalking or falling off (indicating that the quality of the original putty layer is better), you can directly use fine sandpaper to polish and smooth the treatment and brush the new primer and topcoat.

Remove the original base putty and paint, and re-process the base layer.

If it is a serious wall peeling off, then it can only be demolished the old wall to refresh the comprehensive construction, the full construction is equal to the same as redecoration, the amount of work is the largest, suitable for the wall with multiple cracks, peeling, and powdering.

Causes of peeling and cracking of the wall:

1. There will be a process of foundation settlement in the first year or two of the new house. During the settlement process, the wall stretches, which will cause wall cracks or wall peeling and cracking. In the process of foundation settlement, do not rush to partially repair the wall, it is best to wait for the settlement period of 1-2 years to gradually stabilize before starting to repair the wall.

2. When the developer delivers the house, the wall is smoothed with plain ash, and the workers must shovel off the plain ash of the base layer and re-brush the primer when painting the wall. If the workers do not clean the base layer in the decoration, it will cause the wall to peel and crack for a period of time after brushing the latex paint.

3. In order to save money when the decoration company decorates the owner, the ratio of raw materials is unreasonable, such as too much water doping in the paint.

1. You can remove the putty and paint of the wall skin, and then re-treat the base layer of the wall. 2. If the peeling and falling of the wall is serious, you can only remove the old wall and repaint. 3. This situation is generally applicable to the phenomenon that there are many traces of cracking or peeling and powdering of the wall skin.

1. Generally, there will be a process of foundation settlement in the first year or two of entering the new house, and in this process, the settled wall will be invisibly stretched, which will cause cracks in the wall or dry skin on the wall. When the foundation is settled, do not repair the part first, if you are in a hurry to repair, the same phenomenon will occur in a year or two.

2. Under normal circumstances, when the developer delivers the house, the walls are wiped with plain ash. If the workers do not treat the base layer when decorating, it will cause the latex paint after painting to peel and crack.

3. Try to find professional personnel to modify the wall when decorating, if you cut corners in order to save money, the ratio of raw materials is unreasonable. For example, too much moisture will lead to cracking of the wall in the later stage.

The wall skin is removed by professionals, shoveled to the base layer of the wall, that is, the cement layer, the wall is leveled with putty powder, the surface of the putty powder is polished to make it frosted, and the latex paint of the same color is painted on the wall. Relevant popular science knowledge: 1. For areas where peeling is not particularly serious, you can fill it with elastic putty, fill the wall completely, and then brush it with latex paint that matches the wall.

2. There are many reasons for the peeling of the wall, the looseness of the base layer or the oil stain on the surface of the base layer, or the high moisture content on the base layer, the paint is not dried before the second coating, the temperature difference is quite different, the paint used does not belong to the regular products, there is a large number of anti-alkali situations, when decorating the family, we must find a regular decoration team, strictly control each material, not only require the construction technology of the construction team, but also play a supervisory role in the construction process steps. 3. In the case of falling off the wall skin caused by moisture, after shoveling to the base, lay a layer of newspaper or kraft paper, which can better absorb the moisture on the wall, and wait until the wall is completely dry before painting. 4. The requirements for materials for the work of brushing the wall are extremely low, three points of materials and seven points of labor, more reasonable control, looking for a more professional construction team, do not be greedy for cheap, and find someone to paint at will.

Peeling off the wall seems to be a common thing, but it is also a thing that many owners are worried about. Peeling on the wall is first of all unsightly to look at, and secondly, it is more likely to have a great impact on the house. So why does the wall surface peel off?

What should I do if the wall peels off? Let's dive in.

First, the reason for the peeling of the wall.

Counting them carefully, the peeling of the wall can be roughly classified as follows. The base layer of the bridge deck is loose, the surface of the base is oily, the moisture content of the base is too high, the humidity during construction is too high, the paint is frozen before it dries, the cement ratio is not appropriate when plastering, the ratio of wall putty is inappropriate, the scraping is uneven, and the ratio of latex paint and water is inappropriate. In addition, the quality of the latex paint itself is also a big factor.

Therefore, the quality of materials and products and the technology of the construction team must be strictly controlled during the decoration. Strictly follow the construction requirements, which can basically avoid the occurrence of such things to a large extent.

Second, what should I do if the wall peels off?

1. If there are large cracks in the wall, it is recommended to make the wall base at the crack into a "U" shape. The chiseled substrate is then chiseled, where a wire mesh is hung and smeared.

2. For some lightweight partition walls, we usually use kraft paper or nylon mesh cloth. Because the wall itself is very prone to small cracks, in order to avoid the phenomenon of cracking and lead in the ridge, a layer of glass cloth will be pasted to burn or bean cloth, and then the subsequent construction steps can be carried out.

3. After cleaning the base layer of the wall, the first thing we need to do is to paste a layer of good cloth on the wall, or newspaper kraft paper. This is done in order to give integrity to the latex paint film through the tension of the fibers. This method is relatively simple to operate, but the effect is not the best, you can consider the choice for yourself.

4. Another opportunistic way is to use decorative materials to cover up the peeling places. There are many elastic putties on the market, which can make up for the problem of peeling cracks on the wall to a large extent. It's just that the elasticity of this material is not the best, and it can only be used for places where the peeling is not very serious, and it is not suitable for large-scale peeling.

1. The peeling of the wall is caused by not opening the window for ventilation in the house for a long time. If the foundation of the house is concave and the outside of the house is relatively high, the water from the outside of the house will flow into the house, which will cause mold and peeling of the wall. 2. If you don't know it, you can find a relevant professional wall painting master to deal with it.

3. If the time between the decoration and the construction of the house is too close, it will also cause the wall to peel. Suggested solutions: 1. The peeling of the wall is caused by too much humidity in the house, you can make a small bag of lime by yourself and put it in the corner of the room.

Lime can absorb moisture in the air, and it also has the effect of sterilization, killing two birds with one stone. It is best to keep the lime in a safe place. This packet can be reused over and over again, but if it is used for too long, the dehumidification effect will be weakened.

2. You can clean all the peeling places with a knife, and then give a layer of putty to the wall, apply it evenly, and wait for the putty to dry naturally, and then add a layer of reinforcement. Finally, the paint is painted to complete the cracks and cracks in the wall skin. 3. The peeling of the wall is because the base of the wall is loose, and the surface of the base is oily, and the moisture content is too high, which will also cause the wall skin to fall off.

Choose high-quality decoration materials for wall skin treatment.