-
Anonymous users2024-02-12The best way is to add some lubrication to the lock, and any glue should have a clean surface free of oil and stains before gluing. A great way to save money.
-
Anonymous users2024-02-11Building a good relationship between neighbors and being nice to people is the best way!
-
Anonymous users2024-02-10Replace it with an auto-theft door with a keyhole closure function.
-
Anonymous users2024-02-09Seal the ...... with glue first
Hehe, just kidding.
Just install a lock guard, but your security lock must be flat around it, and there shouldn't be too many protruding patterns.
-
Anonymous users2024-02-08With scissors, no kidding with you!
-
Anonymous users2024-02-07Legal analysis: Breaking the law is an act that violates the law on public security administration punishments, and is even a crime if it is serious. Wang Lianfu.
Legal basis: "Law of the People's Republic of China on Public Security Administration Punishments" Article 26: Anyone who commits any of the following acts shall be detained for between 5 and 10 days, and may be concurrently fined up to 500 RMB; where the circumstances are more serious, they are to be detained for between 10 and 15 days, and may be concurrently fined up to 1,000 RMB
1) Gang fighting;
2) Chasing or intercepting others to call for staring;
3) Forcibly taking or arbitrarily destroying or occupying public or private property;
4) Other acts of picking quarrels and provoking trouble.
-
Anonymous users2024-02-06The keyhole of the anti-theft door is blocked by glue, and the glue inside the lock hole is heated with a propane lamp to melt the glue, and the specific operation steps are as follows:
1. Prepare a propane lamp.
2. Prepare a pair of vises.
3. Use a propane lamp to heat the glue inside the keyhole to melt the glue.
4. After the glue melts, you can insert the key into the lock hole with force.
5. Use a vise to twist the key in the direction of the arrow in the figure below, the glue is still sticky after melting, and it is very difficult to twist it directly by hand.
6. You can twist the key to open the door.
-
Anonymous users2024-02-05Dear, who is so bad, actually doing such a bad thing! If you don't want to get it yourself, go to the lock company, and you can solve it for you when you get to that person, and we will solve it for 10 yuan here! I don't know if it's cheap over there! Hehe.
-
Anonymous users2024-02-04Offended people!! The summary is that ketones are all right, but pay attention to fire prevention Wear a mask, sad!!
-
Anonymous users2024-02-03Who is so cheap to get the glue in. Let's change the lock.
-
Anonymous users2024-02-02It can be handled in such a way:
Prepare two lighters (one is not enough), use the flame to burn directly at the keyhole, even if the glue can not be burned directly, the material of the lock is generally copper, which can transfer heat, and the glue is basically melted after the two lighters are burned, while it is heated and softened, quickly spray the banana water into it, and the glue can be removed. ”
1. Drop 502 on the original place to melt the original 502, and then quickly wash it off with water, which is very smart!
2. Insulating oil, pour the insulating oil in the transformer, and the 502 glue will quickly become soft and can be rubbed off quickly.
3. Acetone solution washable 502 glue is a kind of resin glue, as long as the organic solvent that dissolves the resin is used, such as acetone. Acetone is toxic, pay attention to the way to use it, you can stuff the adhesive part into the bottle. Stick 502 glue on a small area, just soak it in hot water, if a large area is stained with 502 glue, apply acetone, and wait about 5 to 10 minutes to remove.
-
Anonymous users2024-02-01Answer 5, [acetone] 502 glue can be wiped with acetone after sticking, and it can be dropped. (If a large area is stained with 502 glue and coated with acetone, it can be removed after about 5 to 10 minutes.) ）
Please refer to it
-
Anonymous users2024-01-31The glue can be melted by burning it at a high temperature.
In addition, I don't know what kind of glue it is, but I know that the ingredients can also be corroded with water like Tianna.
-
Anonymous users2024-01-30Heat it up to soften it, depending on whether it's iron, and of course it'll be black.
-
Anonymous users2024-01-29If you burn it with a lighter, will it burn the glue?
-
Anonymous users2024-01-28Dear, I'm glad to answer for you: the keyhole is blocked by glue and the method is as follows: degummer.
The antidote is a professional dissolution of 502 glue, and the function is particularly powerful, it can also dissolve nail polish and other tenacious glue, and the banquet god is also a good thing to solve the glue problem in Yinxiangling. Once the keyhole is poured into the 502 glue, as long as the antidote is applied to the surface of the 502 glue, the 502 glue will be automatically dissolved after a while. Be patient when cleaning up, because it doesn't dissolve quickly, and you often have to repeat the operation, but the problem will definitely be solved, and it's better than not finding a way.
Heat to dissolve. After the keyhole is filled with 502 glue, because the glue is a flammable liquid, it can be completely dissolved by heating.
Quite simply, do you put the back of the lock unfit with 2 screws that fix the lock panel? You disassemble the 2 screws, the panel will be removed, and then you will see the front and back of the cover lock cylinder 2 covers, there are 2 screws on the two sides of the cover, disassemble and remove the cover plate, you will see the head of the lock cylinder, and then on the side of the lock on the side of the lock tongue there is a screw that fixes the lock cylinder (the screw in the horizontal position of the lock cylinder), remove the screws and then you remember to insert the lock cylinder The position of the lock cylinder must be horizontal, so that you can remove the lock cylinder, and then insert the lock cylinder according to the original lock cylinder position length after removing the lock cylinder. Then install it in the order you just dismantled, remember to install the iron rod of the shaft at the position of the lock handle when installing the panel, according to the method you just disassembled, (remember that there is a bolt below the panel to insert the hole where the bolt is placed), and there may be a new lock cylinder that is still inflexible, that is, the upper and lower tongues of your upper and lower connecting rods are rusty, if the installation is not flexible, you can disassemble the screws of the upper and lower deadbolts, take the cover of the deadbolt, and apply some oil.
Super B-level anti-theft door lock cylinder: the level is higher, their lock cylinder presents a side column, and the shape of the key is a single-sided blade inner milling groove or outer milling groove. After many tests and research, this super B-level lock cylinder security anti-pry time is as long as six hours, if the thieves use the means of forced opening, the lock cylinder will automatically be stuck, resulting in a situation that cannot be opened. >>>More
Even if you use the battery in the car, you can open the external electronic lock within 10! If you choose a mechanical door lock, first: the lock cylinder multi-row marble prevents the technology from opening. Second: the anti-theft door handle is sturdy and a little anti-theft. >>>More
Keyu's "HUNE Huangyi" new concept handle lock:
Royal style, top craftsmanship! >>>More
1. The anti-theft door is divided into four levels: A, B, C, D, and the locking points of the four levels should be no less than 12, 10, 8 and 6 respectively. >>>More