How can I better clean dirt from the bottom of the cup when brushing my teeth?

Updated on home 2024-07-09
6 answers
  1. Anonymous users2024-02-12

    To clean the dirt at the bottom of the tooth cup, you can use the egg shell, crush the eggshell, put it into the dirty cup to be cleaned, then drop a few drops of vinegar, shake it slowly, and then clean it with a brush, you can clean the parts that are usually not easy to clean. Due to the large number of uses, the bottom wall of the tooth cup is prone to accumulate a thick layer of dirt, which is not easy to clean. Scrub the cup with broken eggshells and the dirt on the bottom of the cup can be easily washed away!

  2. Anonymous users2024-02-11

    Precipitation of friction agents in toothpaste. Because we always wipe the cup after brushing our teeth without washing it thoroughly, black sediment will adhere to the bottom of the cup over time.

    However, to do a cleaning after a period of time, the method is very simple, and clean with toothpaste, that is, to empty the water in the cup, squeeze the bottom of the cup with toothpaste, that is, squeeze the toothpaste on the bottom of the dirt, and wipe the cup directly on the toothpaste with toilet paper.

    Give it a try and see how good it works.

  3. Anonymous users2024-02-10

    It is not difficult to remove tea rust, you just need to pour the water from the teapot and cup, squeeze a section of toothpaste with an old toothbrush, and brush back and forth between the teapot and the teacup. After wiping and rinsing with water, the teapot and cup will be bright and new again.

    100% useful, that's how I usually wash my teacups.

  4. Anonymous users2024-02-09

    1. Vinegar: The dirt in the toothbrushing cup can be treated with vinegar, only need to pour a small amount of vinegar at the bottom of the cup, let the dirt inside soak in the vinegar solution for half an hour, the dirt inside will be dissolved, and then rinse with water to clean the toothbrushing cup.

    2. Baking soda: Put some baking soda in a dirty toothbrush cup and pour an appropriate amount of water, and the amount of water can be submerged above the height of the dirt. After waiting for half an hour, the dirt in the toothbrush cup will also be dissolved, and you can easily rinse the dirt inside with clean water.

    Disinfectant: 84 disinfectant is also one of the ways to remove dirt from the toothbrushing cup, you can pour a small amount of water and a few caps of 84 disinfectant into the cup, generally wait for an hour, the dirt inside will fall off on its own. If the dirt inside the cup is thicker, you can repeat it again.

  5. Anonymous users2024-02-08

    Overview

    Everyone knows that the cup for brushing teeth, if it is used for a long time, there will be a thick layer of dirt on the back, so it looks particularly unhealthy and unhygienic, but we really don't know what to do when we choose to clean it, that's like my brushing teeth, the cup is like this, if I don't clean it often, now I also buy a new one, but often this will definitely be a waste of money. Now we're going to learn about brushing your teeth'If there is some dirt in the cup, how can it be easily removed?

    Step Method:

    When there is some dirt at the bottom of the cup, we actually can't clean it directly with gestures, and it is also a waste of time, in fact, this cleaning method is also particularly prone to a dead end, resulting in a symptom of thorough cleaning is not clean. In fact, we should first fill the cup with water, and then pour out all the water, and then put some vinegar in it, so that it can actually be cleaned up.

    Generally, it will definitely cause some dirt after a long time, and then when we use some toothpaste or baking soda in this place, we can easily remove these dirt, and we must pay attention to cleaning every day, otherwise it will cause a particularly big danger to our body.

    Generally, after we all use this toothbrushing tool, we must not put it in a place where the air is exposed, try to put it in the house, if there is dust, there will definitely be some dirt, and this will also bring a bacterium to our mouth. Notes:

    Generally, when we use this toothbrush, try to clean it with water, if it is not cleaned for a long time, there will definitely be some bacteria or dirt, you can properly clean it with toothpaste or baking soda, so that some of the dirt in the cup of brushing teeth will be completely removed.

  6. Anonymous users2024-02-07

    1. First rinse the cup with water, soak the cup with water, and pour 10ml of white vinegar into the cup.

    2. Soak in white vinegar for 10 minutes, that is, give the white vinegar time to dissolve, and then after adding a handful of rice, seal it with a plastic wrap cup and tie it with a rubber band.

    3. Pick up the cup and shake it vigorously for 3 5 minutes, with the dissolution of vinegar and the physical washing of rice particles, it is easy to remove the stains on the low mouth of the cup.

    4. Pour out the white vinegar, and then pour in water to wash it, in fact, rinse the vinegar clean, otherwise there will be a vinegar smell when brushing your teeth.

    5. You can see that the cleaned cup is the same as the new one, is it very simple?

Related questions
8 answers2024-07-09

The user can clean the filter at the front end of the water separator before use every year to ensure the cleanliness of the water pipe and prevent the pipe from clogging the specific methods are as follows: >>>More

4 answers2024-07-09

Current geothermal cleaning methods:

The first is chemical cleaning: chemical cleaning should be said to have a good cleaning effect, but it is rarely used because it is easy to corrode and aging geothermal pipes and system components, as well as polluting emissions. >>>More

28 answers2024-07-09

I think that in order to improve the efficiency of brushing your teeth, you must master the correct brushing method. Be sure to brush your teeth horizontally, because this kind of brushing will not only make your teeth particularly clean, but also very effective. In addition to this, we can use an electric toothbrush to improve the efficiency of brushing.

16 answers2024-07-09

1.Shoot in a proper position.

In general, the correct standard shooting posture is to hold the ball with the right hand as the main and the left hand as the supplement. The palm of the right hand is supported and the five fingers are naturally separated. The armpits, inside of the elbow, the back of the right hand, and the junction of the forearm should be at or near right angles. >>>More

22 answers2024-07-09

The ancients had a special mouthwash, but because the cleanliness was not high, the ancients would also clean their teeth by chewing some tender twigs after meals.