Why do children wear shoes and grind their feet? It s not that there s a problem with the quality of

1. Reduce the impact force of the road surface.

Whether children are jogging, long jumping, or high jumping, their feet add a certain amount of pressure to the road surface, but many parents do not know that the impact of the road on the child's feet is many times the force of the child itself. Therefore, it is necessary for children to wear running shoes that can reduce the impact of the road surface when they are in physical education class, which can not only maintain the healthy growth and development of the human bones of the children's feet, but also reduce the adverse effects of such impact on human health, such as running shoes with strong shock absorption, which can prevent children from damaging the knee joint in the jogging link.

2. Maintain foot skin.

There are two problems with why shoes squeeze feet, one is that the shoe material is not very good or hard, and the other is that the shoes worn by children are too big or too small. However, wearing running shoes is not easy to cause the first problem, because good running shoes are very soft inside, and it is difficult to cause friction in children. Therefore, as long as parents have a good grasp of their children's shoe size, there will be no squeezing of feet.

But the basis is that parents should ensure that their children wear cotton socks and shoes, otherwise it is very easy to squeeze their feet, and it will make them stinky feet.

3. Prevent accidents.

A better running shoe will have a non-slip and wear-resistant sole on the ground, which can make the child feel more comfortable during the session. And the running shoes with better sliding friction can also reasonably prevent children from accidentally falling due to the deviation of the soles of their feet during sports, so it is not easy for children to be injured in physical education class when wearing running shoes. In addition, parents should pay attention to choosing running shoes with soft soles when choosing running shoes for their children, so that the child can not only dress more comfortably, but also continue to cater more to the foot behavior, and will not affect his fitness exercise.

4. Ensure that the foot is heated.

Generally speaking, the vast majority of running shoes on the market are all surface, mainly because the surface shoes have stronger breathability and better heat dissipation. It is not only uncomfortable to prevent children from sweating a lot of feet during exercise, but also easy to make children sweat and slump in their feet, which not only endangers the brand image but also harms physical health. And excessive foot sweating is also easy for children to encounter the phenomenon of shoes thrown out in the process, which is not only embarrassing but also risky.

If the child wears shoes and grinds his feet, it is likely that there is a problem with the size of the shoes. Shoes that fit well are comfortable to wear.

Mainly because the baby is more delicate, and the quality of the shoes is not very good; It's because the child walks in an incorrect posture, just because the child doesn't wear socks when he puts on his shoes.

Because there are some differences between the size of the newly bought shoes and the size of the feet, there are also some hard rubber or leather materials used in the shoes, which cause the shoes to be not soft enough

**The official clear reply is not suitable for quality problems, and the buyer can return the goods at the buyer's expense without affecting the 2 sales.

Shoes grind feet when they are small, which is not a problem of quality, but sometimes the shoes are suitable and will grind the feet, and it may also be a problem with the quality of the shoes.

Generally speaking, it does not belong, it is caused by the mismatch between the foot and the shoe. Of course, there are also shoe materials that are easy to grind their feet, and now many PU shoes need to be rubbed for a period of time.

Shoe grinding belongs to the irregularity in the shoe, which is not a quality problem.

1. There will be a problem of foot grinding when new shoes are just worn, and the shoes will become bigger and bigger after wearing them for a period of time.

2. Shoe fabrics are indeed easy to grind feet, which is a quality problem.

3. Improper walking posture. Incorrect walking posture can also add stress to your feet, allowing more friction between your feet and your shoes. Improper wearing can also cause foot grinding, but it is not a quality issue.

4. The size is not selected correctly, and the shoes of small size are naturally worn to grind the feet.

5. Shoes do not fit. When choosing shoes, because you choose shoes that don't fit your foot shape, you will inevitably wear your feet when you wear them.

The back heel grinds the foot area, including the sides of the heel and the heel. The reasons for this situation are, first, the shoe size is not appropriate, and the heel is too tight; Second, if the roller skates grind the heel under suitable circumstances, then this may be an incorrect way in the sliding process, which is mainly manifested in improper sliding habits such as pushing back on the toes or mopping the ground with the front wheel. Resolution.

In this case, the first thing to do is to check whether the roller skates are suitable for you, and then ask professionals for advice on the correct sliding action, train diligently to learn to use the heel to exert force, sideways push and other safe sliding actions.

Problem 2: Grinding feet on both sides of the ankle.

There are two reasons for grinding on both sides of the ankle. First, it is because the cuff of the shoe is too tight, clamping and pressing the ankle, or the wide mouth of the shoe is too large, and the sliding package is not tight; Second, it is improperly used in the gliding process, resulting in common off-edges.

Of course, in the problem of partial edge, generally speaking, it is largely the problem of the shoe itself not being right, but during the run-in period of new shoes, the new shoes are not suitable for the shoes compared with the old shoes that have been adapted for a long time. Therefore, it takes some time to train to get used to the center of gravity of the new shoe. Resolution.

Method 1: If the cuff of the shoe is not wide enough, you can extend the cuff by heating the cuff, and if the foot clamp is not serious, you can also protect the ankle by wearing thick socks. If the cuff is large, it is advisable to add an insole or tie the laces tightly.

Method 2: If there is a deviation caused by improper use, you need to do more one-foot support sliding training, find the center of gravity between the sole of the foot and the shoe, and correct the edge center.

Method 3: Gradually upgrade your equipment, from high-top shoes to low-top speed skates, or upgrade the wheel frame specifications, you must develop the habit of changing to larger wheels after a period of training and adaptation.

Problem 3: Grinding feet with one foot.

Almost all people will have more or less differences between their left and right feet, especially those who often do roller skating, and the difference between the left and right feet will lead to differences in size and width due to exercise habits. Resolution.

Method 1: It is recommended to accommodate the big foot when selecting the code, and the small foot is adjusted through the insoles;

Method 2: Balance training of the left and right feet, more gliding training, especially for weak feet to strengthen flat training, if necessary, you can use balance balls and other auxiliary equipment.

That means the speed skates you bought for your child are not suitable. In this case, you can put a band-aid or a little oil on the place where your child wipes his feet, so that he can be soft and may get used to wearing it slowly.

Hurry up and change your child's shoes and try the cougar speed skates. The microfiber lining makes the breathability particularly good, and it is sweat-absorbent and non-slip, so it fits better after wearing it for a long time. There is also a lot of relevant information.

Children wear speed skates and always grind their feet, which means that the shoes are not very comfortable inside, and the child should be replaced with a pair of speed skates that are not too abrasive. This one can also be bought with silicone pads and put on the feet or inside the shoes, which can reduce the occurrence of foot grinding.

The selection is not suitable. Most of the grinding positions are hard plastic at the heel of the shoe to grind the ankle bone, add insoles under the grinding, and add cotton pads on both sides of the grinding.

If the child is wearing speed skating shoes now, it is very abrasive feet. It means that the shoes are no longer suitable for wearing. Because the child is still in the stage of growth, his feet are also growing, since there is a situation of grinding feet, he can no longer wear them, buy a new pair of suitable shoes for the child.

It must be the wrong size, not too big and not too small, because children's feet grow fast, so they must fit.

That's not appropriate. Can you still wear it for foot grinding? You can only throw it away and choose a new pair of suitable shoes.

It may not be suitable for a new pair.

It must be a quality issue.

The first version design of shoes is problematic, because the shoe design is unreasonable, and some of the small positions lead to the shoes not fitting, and the shoes are very painful to grind the feet, and the version design is also a part of the workmanship, design - drawings - material selection - pattern - signing - mass production, is the beginning of the workmanship.

The second is the selection of materials that are not suitable for shoes, resulting in foot grinding, and the quality of a pair of shoes is determined by the workmanship and material selection.

Shoes are designed to be carried out for the majority of consumers, because consumers cannot wear shoes normally due to the shoes themselves, so to sum up, I personally believe that this should be a problem on the seller's side, and the cost of the problem should not be paid by the consumer.

Let's think about it from another perspective, consumers have not done anything, just spent money to buy a pair of shoes, but because of the problems of the shoes themselves, they have to bring discomfort to both sides of the mind and body, and then there is no way to defend their rights, how innocent are consumers?

Nowadays, online shopping is very popular, we buy a pair of shoes online is not a way to try on, so after buying back and receiving the goods, you must try it on once to know whether the shoes fit. The seller should ensure that the goods sold do not have any quality problems, and the shoes themselves do not have any problems, so as to ensure that consumers can use the goods normally in the near future after purchase, which is an after-sales guarantee.

Wearing speed skates, children always grind their feet, and the shoes are not very comfortable, so the child changes to a pair of speed skates that are not too abrasive. Silicone pads are also placed on the feet or inside the shoes to reduce foot grinding.