The zipper fell off the side of how to repair the tricks

First, cut two or three zipper teeth from under the side without a lock, then insert the zipper through the opening, and finally fix the cut part with a needle and thread.

The zipper falls off on one side, it is very troublesome to replace, if the lock is broken and buckled back, the zipper will still fall off easily, at the bottom of the zipper without a lock, cut 2-3 zipper teeth with scissors. Pull the lock to the bottom and insert the lock through the opening to easily close the zipper. Then use a needle and thread to sew the cut part together so that the zipper does not fall off again.

The zipper has been repaired, and it will not affect the normal use, so you can use the zipper with confidence.

Or prepare a straw, then use scissors to cut the upper part of the straw, about 2 cm, cut the straw, and then fold the straw in half, pressing the crease a few more times. After cutting the straw, fold the straw in half, and press the crease a few more times to play a role in shaping. Apply a little hot glue on both sides of the broken zipper.

502 glue can also be used without hot glue.

Press the straw up again and press it for a while to set the shape.

Then, use pliers.

Clamp the straw in the middle and cut off the extra straw, so that it is repaired, and this repair method is not aesthetically pleasing. Then, use pliers to flatten the middle of the straw and cut off the extra straw so that it is repaired.

Zipper is a connector that relies on a continuous arrangement of chain teeth to merge or separate items, and is now widely used in clothing, bags, tents, etc. The zipper is composed of chain teeth, sliders, upper and lower stops (front and back yards) or locks, etc. Among them, the chain teeth are the key part, which directly determines the side tension strength of the zipper.

Generally, the zipper has two chain belts, and each chain belt has a row of chain teeth, and the two rows of chain teeth are staggered with each other. The slider clamps the chain teeth on both sides, and with the help of the pull loop, the chain teeth on both sides can be meshed or disengaged from each other.

Don't rush to the repair shop if the zipper falls off, teach you a trick to repair it easily, simple and save money.

The zipper side fell out, and the plug and the shroud went back as follows:

Tools: scissors, needles, thread.

1. First cut 2 or 3 zipper teeth with scissors at the bottom of the zipper on the side without zipper lock.

2. After cutting, pull the zipper lock down to the bottom of the zipper, and put the lock on from the opening, so that you can easily close the zipper.

3. Finally, use a needle and thread to sew the bottom of the cut, so as to avoid the zipper falling off again, and the zipper will be repaired after sewing.

The solution to the zipper is not easy to pull

1. Find a white wax, even a candle, or the yellow or white wax of the pill, and apply it to the teeth of the zipper.

2. The oil of the sewing machine is relatively transparent and clean, and it can be dripped on the zipper, but don't search so much, otherwise it will stay. If you don't have sewing oil, you can make do with peanut oil and vegetable oil, and it is not recommended that the oil is dirty.

3. When the zipper is not smooth, if there is someone at home who knows how to tinker, you can sew a wind and discipline buckle hook with a needle and thread at the part below the zipper, so that you can hook the square hole at the top of the zipper, so that the zipper activity is smoother, and it is also relatively firm, and it is not easy to derail.

4. The zipper is not good, you can see if there is a problem with the head of the zipper, you can try to replace a good head, go to the outside clothing store, and change it on the street.

5. If the zipper head is good, then the entire zipper can only be replaced, so that it can be completely solved. When replacing, you need to pay attention to the integrity and quality of the zipper head and the teeth of the zipper.

Tips for repairing a broken zipper:

1. Press tightly

If the zipper is broken, you need to use tweezers.

Press and tighten it, mostly used for missing teeth after the zipper is closed, first pull the zipper to the bottom, and then use tweezers to gently press to increase the bite force of the zipper, and finally rinse and pull to try.

2. Apply wax oil

If the zipper is broken, it can be treated with wax oil, and the zipper is generally rusted on the zipper and chain, which increases the friction.

Apply wax oil to the zipper and chain to reduce friction between the two, then insert the chain into the zipper to pull it up.

3. Replace the zipper

If the zipper is cracked or damaged, you need to replace a new zipper, first pull the old zipper directly to the top and take it out, and then press the new zipper along the chain to install it to complete the repair.