How many times do you need to scrape the putty to paint the wooden furniture?

Updated on home 2024-07-14
4 answers
  1. Anonymous users2024-02-12

    Many people have been very entangled in this issue, after all, laymen do not understand the decoration procedure, and it is normal to not know whether to scrape putty first or make cabinets first. Usually, putty should be scraped first. The general practice is that the water goes to the top and the electricity goes to the ground.

    There are also hydropower that go to the top or go to the ground. After the water pipe is ready, not only the pressure test should be carried out, but also the water discharge test should be carried out. The wire requires that all dark wires must be threaded through the conduit, and each wire head can be twitched.

    Today I will tell you, this is according to the decoration process, if it is a cabinet made by carpenter, then scrape putty, if it is a customized cabinet, due to the long cycle, scrape putty first. When decorating the home, the wardrobe in the bedroom or the wine cabinet storage cabinet is indispensable for the storage function of the cabinet, the cabinet can be bought a good board, carpentry on-site production, you can also find furniture manufacturers to customize, to the house site to accurately measure the size, I personally think that in the construction procedure is the first carpenter and then painter, but before doing the cabinet, it is best to scrape the putty 1 or 2 times on the wall behind the cabinet, and then make the cabinet, and wait for the cabinet to be done, and then do the oilman, so usually do the cabinet first, and then scrape the putty. Because the normal decoration carpenter is usually done after the bricklayer, do a good job of suspended ceilings, TV walls, wall decorations, and even door and window covers.

    <> about whether to scrape putty or make cabinets first for decoration? This is a question that is often asked during the renovation process, and here I would like to share with you Amu's experience. The decoration is all in a sequential order.

    First hydropower, then masonry and then carpentry, and finally melamine, and finally plumber installation, in which masonry and carpentry can be constructed in succession, but it is best to lay the floor tiles in the masonry hall and operate at the same time as the carpenter. For home decoration, it is usually done first to do the cabinet and then scrape the putty, because this is the construction of different stages of the two types of work, and when decorating, the carpentry is done first, then the cabinet will be done, and then after the carpentry is done, the oilman will enter the constructionThe order depends on whether the carpenter hits the cabinet at the decoration site, or chooses to make a cabinet for custom furniture, in fact, there are two different ways, and the time point of scraping putty is different.

  2. Anonymous users2024-02-11

    It takes about three brushes. Scrape a bottom for the first time. The second and third were used for reinforcement.

  3. Anonymous users2024-02-10

    Scrape at least three times, as wooden furniture is susceptible to moisture and rot, so be sure to paint it well.

  4. Anonymous users2024-02-09

    The MDF substrate is polished, after grinding, blow off the dust on the board with a gas hose Start priming putty, scrape directly and evenly on the board surface The putty needs to cover the plate so as not to show the bottom surface After the putty dries, grind it with sandpaper, and then spray the primer on the putty layer.

Related questions
13 answers2024-07-14

In terms of environmental protection, if wooden furniture is painted, it will be more environmentally friendly and very healthy. In the case of painting, it is some particularly professional painters who use their professional brushes to dip some furniture paint and then paint a layer on top of the wooden furniture. >>>More

16 answers2024-07-14

Treated with paint. For some wooden furniture corners that have not been eaten by insects, the surface of the wooden cabinet is brushed with paints such as tung oil, shellac paint or varnish, so that the moths are isolated from the air, so as to achieve the purpose of mothproofing.

15 answers2024-07-14

The placement of wooden furniture is determined by the size of the house and your personal preferences. Now most young people will give priority to wooden furniture when buying furniture, because wooden furniture looks more simple and generous, compared with other ordinary furniture, wooden furniture also has a classical atmosphere, which is very attractive, but most friends do not know how to place after buying wooden furniture, in fact, this problem is not difficult to solve, we should fully combine their own home type and personal preferences when placing furniture, Let's talk about how to do it. >>>More

6 answers2024-07-14

The term of three guarantees for wood furniture, metal furniture, bamboo furniture, rattan furniture, plastic furniture, glass furniture and stone furniture is 1 year; The three-guarantee period for dark precious hardwood furniture, mahogany furniture and upholstered furniture is 2 years.

16 answers2024-07-14

Everyone's aesthetic is different, so when they are decorating their own home, their choice of some furniture is also different. Therefore, many people will choose some wooden furniture, which can make their home look more affluent and look more noble. So for these wooden furniture in the summer will often be moth-eaten, so today we want to talk about if the wooden furniture is moth-eaten, what methods can we use to effectively prevent it? >>>More