If you want to paint furniture, how should you paint it?

Such as:If home décor is a wooden element, they will fall off and become old after a few years or more. What should we do? So, if you paint again, you will change it immediately.

With careful planning, life should be more fulfilling. We can do it ourselves, or we can paint it ourselves. There's no need to spend money on workers to do it.

Today I'm going to teach you how to paint furniture quickly and easily. If you want to spray the furniture yourself, you must first choose the same type of sandpaper for sanding according to the roughness and hardness of the wood surface. Brush the primer and adjust the consistency of the primer according to the density of the wood.

For high-density hardwoods, the paint can be thinner, while softwood can be thicker.

It should be applied evenly along the grain of the wood and should not be too thick. Once completely dry, sandpaper it until it feels smooth and has no protrusions. Wipe with a damp, soft cloth a few times and dry at the end.

As soon as the second coat of paint is covered, the second coat of paint is brushed and then sanded gently and evenly in the direction of the paint with water sandpaper. After painting, sand with a fine sandpaper dipped in water, but not too strong, and sand evenly. The last time I painted, I didn't sand, just put a layer of protective wax.

Tips for painting yourself. The furniture is inlaid with mirrors or glass. You can stick them on tape or newspaper so that they don't get smudged by paint

First, paint the concave part of the edge from the inside out and avoid dripping paint on the edges. Start by brushing some of the more obscure locations, such as the inside of the cabinet, and then brush the surfaces. When drawing, don't be too impatient, brush your teeth slowly to prevent bubbles, and if there are bubbles, break them immediately.

Ensure that the construction environment is clean. If the surrounding area is not clean enough while painting, dust from the air will fall into the paint, giving the paint surface a grainy and unsmooth feel. Basic items for painting and painting:

Duct tape, paint brushes, masks, glasses.

Generally, brush three times, the first time is to increase the penetration depth of wood wax oil, and slowly dry after brushing; The dose is then preserved using the friction method and then dried; Immediately after air drying, wipe with a brush and immediately wipe the surface of the workpiece with a clean cotton cloth。This can make the surface of the furniture smoother. In addition, increase the number of times you rub and sand with fine sandpaper each time to get the effect of high-end furniture.

After learning to paint the furniture by himself, he also reminded everyone that the paint can be used normally for 7 days after painting, so as to avoid the gas emitted by the furniture paint from affecting the health of the family. At the same time, the fluidity and temperature of the indoor air must be maintained. Moderate humidity ensures that the paint film on the surface of the furniture reaches normal hardness; Furniture coated with furniture paint can withstand the high temperatures of water cups, but should not be placed near heaters such as stoves and heaters to avoid deformation of wooden furniture and furniture due to high temperature baking.

Paint first to move out of the important things in the house, and then choose paint with less harmful substances, after brushing, open the window for ventilation for at least half a year before moving in.

When brushing the paint, it should be sanded clean first, and the paint must be brushed more than twice, so that the paint will be even.

Take the paint, soft brush, and open the paint cover. Dip the brush in the paint bucket, and don't get too much paint at a time, just appropriate. The rule of painting is from top to bottom, from left to right.

Pay attention to the corners and hidden areas that also need to be painted to maintain symmetry. It should be rubbed evenly along the grain of the wood and prevented from being too thick. Once well dried, sand with sandpaper until it feels smooth and not raised.

Wipe a few times with a damp, soft rag and finally wipe it off. Simply cover the second coat of paint, brush the second coat and gently polish it evenly along the direction of the paint with water matte paper. After brushing the paint, use a fine sandpaper dipped in water to polish and polish, but not too firmly, and polish evenly.

The last time the paint was not polished, only a layer of protective wax was put in.

The furniture is covered with a bathroom mirror or laminated glass. You can stick them on tape or newspaper to prevent them from getting dirty. First, the paint is recessed on the edges from the inside to the outside and prevents the paint from dripping off the edges.

Start by brushing some of the more intimate areas, such as the internal structure of the server cabinet, and then brush the surface. When painting art, don't be too impatient, brush your teeth slowly and rinse your mouth to avoid bubbles, and if there are bubbles, please break them immediately. Ensure that the construction environment of the project is clean.

If the surrounding area is not clean enough during art painting, the dust in the air will fall into the paint, making the surface of the paint feel uneven and uneven. The basic objects of art painting and painting: adhesive tape, paint brushes, protective masks, myopia glasses.

Furniture can be painted by itself, and the painting steps are:

1. To polish the furniture, first use coarse sandpaper to polish the place that needs to be painted, and polish it not too much at the corner to ensure that the original shape is not affected.

2. Moisten the surface of the polished furniture with a clean rag and dry it, then replace it with fine sandpaper and polish it again. Finally, wipe dry with a rag.

3. Prepare a paint brush and dip it in the paint bucket with the brush. Paint from top to bottom and left to right.

4. Put the furniture in a cool place and wait for it to dry.

You can paint it yourself, but you must pay attention to the protection of the furniture. The first step is to adjust the color, then pour in some protective oil, stir well, and then apply it to the top of the furniture, and put it under the sun to dry.

Furniture can be painted by itself, in the process of painting, the surface of the furniture should first be sanded and smoothed, and then you should choose the color and material suitable for you to paint.

I don't think it's okay, it's easy to cause uneven application, under normal circumstances, it is necessary to polish the furniture, then apply primer and finally apply ordinary paint, which needs to be dried.

If the furniture is discolored or you want to change the furniture to a new color, we can consider painting the home virtual blade. So how do you paint furniture? What are the precautions for painting furniture? Next, I will share it with you one by one.

1. How to paint furniture.

Step 1: Sanding. Find a cuboid that you can hold with your hands.

Wrap one of the relatively flat sides in sandpaper, press it with your hand and polish it. The order of direction of the grinding plane is: first horizontal and then vertical.

When sanding, it is necessary to go up and then down, first outside and then inside, and the selection of sandpaper is coarse and then fine. The corners and shapes of the furniture, as well as the details, have to be done by hand. Why polish?

On the one hand, it is to remove impurities from the ** paint and paint surface, and on the other hand, it is to increase the adhesion of the new paint.

Step 2: Preparation before painting. After sanding, see if the furniture has uneven places, if so, use putty to level and polish again to a flat state.

The furniture and floors are then protected to prevent paint from contaminating these areas. And wipe the furniture with a damp towel with little water. Stir the bucket paint well with a small stick, and do not move your hands too fast to prevent spilling.

Step 3: Paint once. When brushing the first wood paint, adjusting the primer is a very important process, and the primer should also know the density of the wood, and the harder wood has a high density, the primer can be adjusted a little thinner, and the soft wood primer should be adjusted to be a little sticky.

When you start to paint, you should paint evenly along the texture of the wood, don't paint too thickly, and wait until the wood paint is completely dry and sandpaper, polish until you feel smooth to the touch, and there is no protrusion, and then wipe it with a soft damp cloth several times, and finally wipe it dry. The use of brushing can make the penetration depth of wood wax oil greater, and also speed up the speed of construction.

Step 4: Brush the secondary paint. After brushing, you can cover the wood paint of the first brush, and then use more than 500 mesh of water sandpaper to follow the direction of the paint, and polish it evenly.

The use of scrubbing can save the amount of wood paint. Wait until the second or last lacquer surface is dry, immediately wipe the surface of the wood with a clean cotton cloth to make the surface of the wood cover smooth.

2. What are the precautions for painting furniture?

Generally speaking, counting the last coat, you need to brush the topcoat about 4 to 8 times to get a better effect. The more times the surface coat is painted, the better, but generally not more than 10 times.

2. Whitening phenomenon: during construction in humid weather, the paint film will be whitening, which can be eliminated by adding a diluted dose of 10 15% nitro magnetized white water.

What should I do if there are elements of wood in my home, which usually peel off and become old after a few years or ten years? If you can't say it, change it, we're not very tyrants, so it's new if you paint it again. Life is meant to be more fulfilling by being on a budget.

If we can do it ourselves and paint it ourselves, we don't have to spend money on workers. If you want to paint furniture directly, you must first choose a model-type sandpaper according to the roughness and hardness of the wood surface. Paint, adjust the concentration of the base according to the density of the wood, hardwood is dense, the paint can be whitened, and the softwood should be thickened.

When painting, it should be evenly applied along the texture of the wood, not too thick, sanded with sandpaper after it is completely dry, wiped several times with a damp and soft cloth until it is smooth to the touch and does not protrude, and finally wiped. Apply the second coat of paint, whichever covers the first coat of paint, and then gently and evenly sand with sandpaper in the direction of the paint. Give the furniture a third layer of paint, wipe it and grind it with water with a finer water sandpaper.

Don't use too much force, grind evenly. The final paint does not need to be sanded, only a layer of protective wax is required.

The secret to painting furniture directly, furniture inlaid with mirrors or glass, you can first apply it with a rubber band or newspaper to avoid painting. Apply the recesses first, from the inside to the edges, without leaking paint from the edges. Wipe down more hidden areas, such as the inside of cabinets, and then paint the surface.

Don't be in too much of a hurry when painting. Apply slowly and sequentially to avoid foaming. If there is a bubble, it will burst.

Ensure the cleanliness of the engineering environment, if the surroundings are not clean when painting, and the dust in the air falls on the paint, there will be particles on the paint surface, giving people a feeling of non-smoothness. Paint essentials: adhesive tape, paint brushes, masks, glasses.

The method of application increases the penetration depth of the wax oil, and it is slowly dried after wiping. Then use the kneading method to save the amount of use and dry. Wipe the surface of the workpiece with a clean cotton cloth immediately after drying again, which can make the surface of the furniture smoother, and can also increase the number of wipings, and polish it with fine sandpaper many times to achieve the effect of high-end furniture.

Remind yourself that after painting your furniture, you will also need to wait 7 days for it to work properly. The gas emitted by furniture paint does not affect the health of the family, and at the same time, it is necessary to maintain the fluidity of indoor air and the adequacy of temperature and humidity. Make sure that the paint film on the surface of the furniture reaches normal hardness.

Furniture painted with furniture paint can resist the high temperature of the drinking glass, but it should not be close to heaters such as stoves and heaters. It should be baked at high temperature to deform the wooden furniture and prevent the surface of the paint film from cracking and falling off.

Attention should be paid to the choice of paint brand, the color of the paint should be paid attention to, etc. The quality of paint made by different brands is different. Choose the right color of paint so that the furniture will look better.

It must be sanded clean with sandpaper to apply paint, and when painting, you must pay attention to apply it layer by layer, apply it several times, and pay attention to whether the paint is corrosive, whether there is a peculiar smell, whether it will fall off when touched, and whether there is formaldehyde.

First of all, when choosing a game, you should choose environmentally friendly, colorless and odorless, choose safe, and paint the furniture to be placed in a ventilated place to dry.

1. Preparations:

1.Clean the wood to be painted, and wipe it clean with a damp cloth. The wood should be dried.

2.Cooked tung oil, turpentine (other thinners are fine, they will soon volatilize anyway), oil, black bristle brush, cotton. Must be cooked tung oil, can not buy raw tung oil, raw tung oil is not easy to dry, if you can't get it a month.

It is sold in the building materials market and the ancient building store, and it is packed in iron drums. A few days ago, I bought a bucket of about 100 yuan for about 100 yuan from a barrel of 5 catties in an ancient building store 100 meters east of the Chi Slip intersection of Xiaohongmen. I saw that there was a grind on the **, but it was very expensive, and it was still plastic packaging.

2. Wipe or brush the oil with tung oil

1.For the first time, tung oil:turpentine = 1:

5, the second time, tung oil: turpentine = 1:4.

Tung oil can only be less than this ratio, not more. The less you do, the faster, and the less you do, the thinner. Some people have a lot of tung oil, less thinner, and a thick layer of brushing, and it won't dry for a week.

2.If you brush it, use gauze to drain it, otherwise there will be small beans on the painted surface after brushing. The longer the tung oil is left, the more it must be drained.

3.If you brush, polish it every time. Polishing is so that the oil can be hung. Wipe with a cotton cloth without sanding. If you have time, brush or wipe it twice, or even 7 times, and it will be strong and beautiful.

3. Use tung oil + oil to mix the paint. Rub the color of the mixture of oil and tung oil directly on the sanded log.

Camel brand oil or Dafu brand oil is more famous. There are more than a dozen colors, and you can also buy your own favorite color.

First prepare tung oil and thinner, also more than 1:3, and then mix in oil seeds, and wipe it on the wood with a cotton cloth. It is to rub the tung oil first, and then wipe the color.

The main reason for this is that after the furniture is shipped, tung oil is used as the base oil to ensure that it is not deformed. Later, there will be time to slowly put on the color of the blind hole.