What problems should be paid attention to when laying large size tiles? How to avoid waste?

Problems to pay attention to when laying large-size tiles: Nowadays, it is common to see some customers return the floor tiles that have not been used, but find that some cannot be returned, mainly because the floor tiles have been soaked in water. Nowadays, manufacturers or stores are generally not allowed to return the floor, and if there is no floor tile that has been used, it will cause unnecessary consumption.

Proposal: How much brewing is needed, how much can be brewed in the construction of the project, it is not necessary to brew all at once, and the tea should be combined with the progress of the worker's project.

Floor tiles in the paving before the mold program, many of the construction workers are a brick on the paving, and so to a certain extent but found that the floor tile mold matching effect is not good, the proportion is not harmonious, so remove it and pave again, and cause unnecessary wear and tear and consumption. Suggestion: Do a good job of pavement mold matching scheme before paving.

The correct use of cement model and the mixed proportion of cement sand, contact with many good friends to reflect the case of tile cracking, some of which are caused by the unreasonable proportion of cement sand mixed or the cement model is too high, the proportion of concrete is large, the cohesion of ceramic tiles is strong, and the bricks can be quickly sticked, but the proportion of concrete mixing is high, and the thermal expansion coefficient of cement mortar is large, and it is easy to squeeze the bricks after paving. The recommended ratio is 1:3 for wall tiles and 1:3 for floor tiles

1:2--3, the concrete number of concrete is the number of concrete. Again, the wall can not be made of blockboard as wall material, and tiling can easily cause the floor tiles to warp and fall and crack.

Paving can avoid waste: when paving, there will also be a laser cutting of a whole tile, the unique shape of the solid part and its floor tile size, the overall matching of color, if not set in advance, there may be inaccurate position of the floor tile in the paving link, laser cutting of the size of the floor tile deviation, etc., and then cause many problems such as slow paving engineering project, floor tiles, auxiliary material consumption, etc. If the relatively simple modeling, there is no design drawing under the premise, in the paving process will inevitably encounter several tile cutting problems, which may lead to the consumption of floor tiles, so after paving, reasonable arrangement, as far as possible in the same indoor space do not appear two rows of whole bricks.

When booking floor tiles, you can buy a few more floor tiles that are slightly better than the cost budget, which can not only prevent the lack of floor tiles during paving, but also prevent the problem of partial replacement of ceramic tiles in the later stage.

Large-size tiles must be tiled in the process of laying, and the wall must be leveled before tiling. In this way, it can ensure that it will not fall in the later stage.

When laying large-size tiles, pay attention to the position, don't wait until the finish of the paving to find that there is more, which is too wasteful.

When choosing bricks, you can consider several rooms to choose bricks of the same type of color, and you may use the leftover materials used in the previous room when paving. Second, choose bricks with flat or regular flowers, so that the cut bricks can be used from the other direction. Third, the defective and damaged bricks are used to the bottom or top, which can be covered.

Fourth, the kitchen is finally pasted, and the back and bottom of the kitchen cabinet can be pasted with other cut bricks. Fifth, the appropriate planning and paving direction, to ensure the appearance of the situation, as far as possible reasonable arrangement.

The reason why many people do not recommend laying large tiles: because the wall tiles are easy to clean, not easy to accumulate dust, and can be cleaned with clean water. Avoid your baby's scribbling, don't worry about dirty walls, even if they are dirty, wipe them with a rag and clean them.

It is durable and resistant to cleaning, because the floor tile has a high wear resistance index, and it is still as good as new after ten years of application. The walls are all smooth tiles, which look cool in summer. Although the floor tiles are durable, once they are bumped and damaged, it is more troublesome to repair and replace.

The cost of dry-hanging stone for wall bricks is relatively high, and it is easy to empty when wet. Falls are more risky, and can damage furniture and injure loved ones.

Disadvantages of laying large tiles: tiles are easy to hollow and fall off the wall. This is due to the fact that if the wall tiles are paved on the wall of the living room, interior designers choose floor tiles on the wall.

As you can imagine, if you use traditional small-sized wall tiles to lay on the wall of the living room, it is actually very unsightly.

Small tiles do not look more exquisite, large capacity can be added to large tiles, and small space to pave small tiles, that will make the whole space look bigger, like the bedroom paved small tiles are definitely more beautiful than large tiles, everyone can search for a before and after comparison on the Internet. Generally, the light source of most bathrooms is not very good, we all know and I recommend that you can choose beige or white floor tiles, and assemble more lights, which will also make all the bathrooms look brighter, If the actual effect of lighting at home is not too good, then it is recommended to lay wooden floors.

If the light source in the room is dim, and the cold floor tiles are laid out, the room will look even more eerie. You can choose a warmer wood floor, and the sunlight will be refracted into it to feel very warm. The upper feet of the floor are relatively comfortable, and the wood can absorb and volatilize the moisture above, so it can be adjusted to the temperature and humidity of the human body.

If you want to renovate or move to a new house within five years, it is advisable to install wooden floors. After a long time, you will get tired of looking at it, and if you want to change the design style, the removal of the tiles will be very difficult.

The choice of colors for large tiles may be relatively small, and a lot may be wasted when choosing for decoration.

Many families will not choose to lay large tiles when decorating, the stability of large tiles will be poor, and the difficulty of laying is relatively high, and the cost is relatively high. It is easy to crack in the later stage.

It will make the cost rise, especially easy to hollow, easy to fall off, it will look more crowded, and the effect is not good.

This is normal, you buy tiles according to the area of the paste is certainly not enough, when the tile is lost, such as rushing to the corner of the wall to appear a gap to cut off a whole piece of tile, the loss will be great, buy tiles must add 20% of the loss to the area.

The tiles that my family bought in Terrence, they gave me the calculation of the shopping guide, and the large bricks did not exceed 2 pieces, which saved a lot of trouble later. The scheme of tile loss paving is related, depending on whether the tile is straight or diamond paving, relatively speaking, diamond paving will be more expensive than straight paving; 2. The shape of the wall is related, the more regular the wall, relatively speaking, the loss of ceramic tiles is smaller, the more corners of the wall, the size of windows and doors and the proportion of bricks are different, the greater the loss of ceramic tiles; 3. The proficiency of workers is related, the higher the level of workers, the smaller the loss, and the greater the opposite!

The calculation of the indoor area is only the area after the pavement is completed, and the actual paving of the floor tiles should be cut according to the width of the room, such as the actual situation, so it is not possible to calculate the quantity, and there must be a difference in the number.

I bought it according to the size of the row ruler, and I didn't count the net size.

You just counted the room area, not the wear and tear during construction.

Precautions for tiling - laying of wall tiles.

1. When the base layer is treated, the dirt on the wall should be cleaned up in time, and the wall should be watered and moistened one day in advance. If the wall of the base layer is hearty, when the cement mortar is dry, you can carry out the process of arranging bricks, elastic lines, and sticking towel wall tiles.

2. Before pasting the bricks, it must be soaked in water for more than 2 hours, and the bricks should not bubble, take them out to dry, and set aside.

3. When pasting tiles, when encountering the supporting parts of pipelines and bathroom equipment, it must be required to be cut and matched with a whole brick sleeve, and must not be pasted with non-whole bricks.

Precautions for tiling - laying of floor tiles.

1. Before the tile is used, it must be soaked in water for half a day, and the brick body shall not bubble.

2. There should be a slope of flowing water between the kitchen and bathroom to avoid the phenomenon of water accumulation in the future. If the waterproof layer is accidentally damaged during construction, the waterproofing must be redone, and there is no leakage in the 12-hour test of water accumulation.

3. After the ground tiles are laid, the brick surface must be covered with cardboard, and it will take at least 24 hours before you can walk on the brick surface.

Precautions for tiling - after tiling.

After the tile is paved for 1 hour, the dirt left on the brick surface should be wiped off immediately, for example, after the caulk is adhered for 4 hours, it is relatively difficult to clean. After 12 hours of tile paving, the brick surface should be inspected, and if there is a hollow drum, it should be repaved immediately.

Pay attention to 4 details of tiling.

1. For construction personnel with rich decoration experience, caulk is generally wiped with fingers. Because the brush is too soft, it is difficult to fill the caulk completely.

2. The balcony should be tiled, so it must be brushed with a thick layer of mud on the basis of the original exterior wall, which will make the tiles stick more firmly. If you don't brush it, the tile can be attached, but it is easy to fall off in the future use process.

3. Because the wall tiles are easy to crack, it is also a technical job from the perspective of drilling holes in the tiles.

4. If the wooden wall is to be tiled, it is recommended to fix the barbed wire on the wooden board, the purpose of which is to enhance the adhesion of the tile.

The above is the introduction of the precautions for tiling, I hope to help friends who have this need!

1.Before laying, the first thing to do is to do the base treatment, clean all kinds of dirt on the wall, and water and moisten it one day in advance. If the base layer is a new wall, when the cement mortar is dry, you can prepare to paste the bricks.

2.The wall tiles should be selected before paving, and should be soaked in water for more than 2 hours, and the surface moisture should be dried for later use.

3.Before paving, the pay-off positioning and brick arrangement should be carried out, and the non-whole bricks should be discharged in the secondary part or at the shady corner. It is best to lay the whole brick from the bottom in the direction from the bottom to ensure the decoration effect of the whole bathroom.

Each wall should not have two columns of non-whole bricks, and the width of non-whole bricks should not be less than 1 2 of the whole brick. When pasting wall tiles, it should be noted that half bricks should be arranged at the top, and the brick joints should be 2 4mm wide.

4.Combined mortar should use 1: cement mortar, plus 3% of the cement amount of surfactant. The thickness of the mortar should be 5 6mm. Cement mortar should be spread all over the back of the brick, and a wall should not be paved to the top at one time to prevent it from collapsing.

5.Because the kitchen and bathroom pipeline wells are easy to deform and cause brick cracks, stainless steel strips can be used to wrap the sunny corners of the wall tiles.

Floor tile 1The floor tiles should be soaked and moistened before paving. Natural stone should be paved before the color, parquet, parquet and try to spell, number.

2.Before paving, the thickness of the mortar of the bonding layer should be determined according to the design requirements, and the crosshairs should be pulled to control its thickness and the surface flatness of stone and floor tiles. Before paving, pay-off positioning and brick arrangement should be carried out, and non-whole bricks should be discharged in secondary parts or shaded corners.

Each wall should not have two columns of non-whole bricks, and the width of non-whole bricks should not be less than 1 2 of the whole brick.

3.When the stone and floor tiles are paved, they should be kept in place horizontally, and they should be lightly tapped with a rubber hammer to bond tightly with the mortar, and at the same time adjust their surface flatness and joint width. The seam width is generally 2 4mm. And 1mm lower than the brick surface, 24 hours after the ground cleaning.

4.According to the brick positioning, the line is paved in a row. The paving mortar mix ratio is 1:, and the mortar thickness is 15-20mm.

5.For every 10 bricks paved, check the surface flatness and slope with a ruler, and adjust the brick joints appropriately. And ensure the cleanliness of the bricks.

6.When laying floor tiles in the bathroom, a certain slope should be maintained along the floor drain position to ensure smooth drainage in the future.

This arching is not a small gap between the tiles, when you pave a large area of tiles, the gap between bricks and bricks is no problem, when the bricks are paved to the joint with the wall, it should be not less than 1cm from the wall, and then use the baseboard to cover the joint. Another reason for warping may be that the mortar on the floor is not full when you lay the bricks, or the amount of cement used is too small.

I guess this is a problem with tiles. It's not good to see if the gap is too big, especially after a long time, the gap has become a black line. In fact, the gap is best around 1mm, and it is particularly ugly if it exceeds 2mm.

Large-size floor tiles have few joints, which is suitable for houses with large space, and paving large-size floor tiles in houses with large spaces makes it look high-end and atmospheric.

The narrow living room is suitable for rectangular and large floor tiles.

Large-size floor tiles are actually suitable for home decoration. However, large floor tiles are not very suitable for smaller house spaces. Because the large size floor tiles are paved in a small space house, the house space will feel more cramped.

The small room is paved with small size floor tiles, which will also make people feel more spacious. Therefore, large-size floor tiles are best used in living rooms and dining rooms with large spaces. If it is used in a space of 35 square meters or more, its visual effect will be better.

Large-size floor tiles are more suitable for living room paving.

Therefore, large-size floor tiles are not very suitable for small apartments, which is also a disadvantage of using large-size floor tiles in small apartments.

1. The number of workers generally required for home decoration tile paving.

In the home decoration tile paving, generally speaking, there are two people, a master and a small worker, and the small worker is mainly to do a coordinated work.

2. Shoveling of old floors and tiles.

Flooring is relatively convenient, the tile needs to be smashed off, when removing the tile to pay attention to two problems, one is because of the noise, say hello to the neighbors in advance, avoid everyone's rest time, and the other is to pay attention not to damage the water, electricity, heating and gas pipelines. The demolition work of the decoration can be entrusted to other demolition teams, or the construction party can be responsible for it, and you can compare it yourself.

3. The content of the joint work belt material in the tile paving.

The joint work with material for tile paving ** generally includes the labor cost of the construction of the worker and the cost of cement and sand.

4. Is there a difference between wall tiles and floor tiles?

The performance requirements of wall and ground tiles are not the same, the performance of floor tiles is higher than that of wall tiles, all floor tiles can be used as wall decoration, and ordinary ceramic glazed tiles can not be used as floor tiles. The construction cost of wall tiles and floor tiles is generally not much different, but the construction method is slightly different, the wall tiles are paved with cement mortar when the wet paving method is adopted, and the floor tiles are constructed by the dry paving method.

5. The tiles are packaged in boxes and then distributed (unless they are some pieces).

6. Whether you can rest assured that you can buy online from well-known brands.

Relatively speaking, it is more reassuring than non-well-known brands, but it should be noted that some ** particularly low products, it may be that some well-known brands separately entrust other manufacturers to OEM products (their own production costs are high, and consumers may take this way to attract consumers through low prices on the Internet), and it is necessary to pay attention to this situation.

7. How to see the flatness of the tile.

Identification method: 1) visual observation, put two tiles face to face together to observe the size of the gap between the two, 2) with the help of some relatively straight items for identification, such as the level, the level is placed in different parts of the brick surface, and observe whether the size of the gap in contact with the brick surface is uniform.

8. How to keep the tile paving smooth.

The key points can be done in the following ways:

1) Before paving, the elevation line of the tile paving on the wall and the floor is played.

Generally, the elevation line is bounced at the position of 50 cm above the ground on the wall, if the ground height occupied by the floor tile paving is 5 cm, then 45 cm is measured down along the elevation line as the uniform height of the ground paving, and the tile is paved from the side (the part against the wall) when the baseline line is maintained for paving;

2) Pay attention to the use of horizontal ruler for calibration at any time during the paving process, and adjust the uneven places in time.