After more than a year of decoration, the wall suddenly peeled , what should I do?

Hello friends! If you deal with it yourself, because it is not professional, and the decoration materials are not retailed, the cost of labor and materials is not necessarily good. It is recommended to ask the property in this community who is decorating, and negotiate with the decoration workers how much the materials are bringing, so as to save worry and effort and not much money, and can also get professional treatment, and never suffer in the future. Good luck!

This is because the wall surface was not properly treated at that time, and the peeling wall skin needed to be snatched off, and the putty was scraped again and the wall paint was repainted. If your home is decorated by the decoration company, you can find the decoration company at that time to deal with it today, and generally sign the decoration contract when decorating, according to the contract, if the decoration company is within the warranty period, it should be handled free of charge.

It depends on whether the contract between the two parties stipulates the warranty period of the wall at that time? If there is a problem within the specified warranty period, the decorator shall be responsible for providing free repairs. On the contrary, there was no relevant agreement, so I had to repair it myself. Therefore, you must find a regular decoration company to decorate your house.

Find a repairman and ask him to repair it again, and he will be white.

It is recommended to remove the peeling area of the wall skin and then reapply the paint. It may also be that the cement layer on the front wall of the putty scraping is unqualified, and the best way to solve the peeling off of the wall skin is to redo the entire wall. Hall demolition.

First of all, shovel off the place where the wall skin falls off, and see if there are loose, cracked, and hollow areas in the other parts of the wall, and it is best to eradicate these areas together;

Check the reason for the peeling off of the wall skin, which may be due to the dampness caused by the environment, or it may be the waterproof problem of the top surface, so the cause should be found from the source to facilitate the solution of the problem in the later stage;

If you paint it partially, it may cause a difference in color, so you can choose to paint the wall or use green plants to cover it.

It should be noted that the method and layer of painting should be consistent with the original wall decoration, and the wall should be dry during construction, and the same paint can be selected to apply, so as to ensure the adhesion between the paints.

This answer is suitable for the repair method of wall skin peeling off after renovation.

Peeling on the wall is a very common phenomenon, which not only seriously affects the aesthetics of the house, but also has a great impact on our daily life. So, how should we deal with the newThe walls of the renovated house are peelingProcessing? What materials are better to use for wall decoration?

I'm going to give you a brief introduction.

1. Redo the wall.

If the peeling of the wall is more serious, it means that the wall base was not done well when it was renovated, and it is best to repaint the wall. The first thing is to remove the original wall surface until the wall base layer is exposed, and then repaint it with primer, level it with gypsum, and repaint the wall.

2. Remove the peeling place.

If the peeling of the wall is not particularly serious, you can also just remove the peeling place, the tool is a putty knife, and then use the interface agent bought, use a small roller to roll the brush in the peeling place, and the wall will be smooth after drying.

3. Make the first layer of the bottom.

If the peeling of the wall is not serious, you can also make the first layer of covering. Go to the market to buy white glue, add water to it, and add putty powder to it. On the coating of the interface agent, use a batch knife to get it, flatten it, and dry it, so that the wall surface is flat.

1. Diatom mud.

Diatom mud is very commonly used, and its main function is to regulate indoor temperature, purify the air, etc., which is more environmentally friendly. However, diatom mud is not waterproof, so it is more difficult to take care of it, so you have to be very careful.

2. Artificial jade slabs.

The advantages of artificial jade slabs are more prominent, the light transmission effect is good, the color difference is also small, and the plasticity is also high, many families prefer it, and after construction, the material is not easy to fall off and not fragile, which is easy for families to take care of.

3. Wood. Wood is also used in many homes because the wood decoration is beautiful, and the toughness and hardness are good. However, wood is more prone to deformation, and its service life may be shorter.

The above is Guan XinThe walls of the renovated house are peelingAs well as helpful when choosing wall decoration materials.

You can get it for free

The peeling of the orange surface on the wall not only affects the appearance, but also produces dust and hygiene problems. Generally, when solving the problem of peeling, it is best to solve it reasonably according to the situation of pickpocketing, and the following will be introduced to youThe coating on the walls is peelingIs there any way to fix it?

The coating on the walls is peelingRemove the peeled part and scrape off the putty again; Remove the problem area and smooth the edges of the extracted part, scrape the putty again, apply primer, and brush it again, but it will be possible to give a slight difference in the color of the original wall.

2.strengthening the grassroots; The coating on the walls is peelingIf the local peeling is severe, move the body from the original wall to the base layer of the wall, reapply it with an interface agent or sealing primer, and then level and paste the plaster according to the plaster plaster (to strengthen the prevention of cracks). After scraping the wall cladding three times, it will soften and the quality of the entire base will be better.

3. Brush the cover directly; The coating on the walls is peelingRinse the water with water after soaking with a spatula, if there is no dust or now it falls off (which indicates the better quality of the original putty layer), you can choose the worst part of the wall to rinse, you can polish it directly after cleaning it with fine sandpaper, apply a new primer and topcoat.

4. Decoration; AllThe coating on the walls is peelingThe removed cement layer must be moved to the surface of the brick wall, and then the wall must be completely renewed: flat wall, primer primer, brush interface agent, incense three batches, primer polish the wall again, and the effect of the upper layer is superior. At the same time, high strength, good toughness, light weight, impact resistance, no deformation, not easy to age, not easy to corrode, long service life, good moisture-proof performance, suitable for you to use in a humid place, it is difficult to enter the humid and dry steam indoors and comfortable It does not filter water, does not filter water, which increases the service life, it is completely away from the leakage of the wall, and leads to mold.

How to deal with it, so that you can avoid the fact that everyone naturally wants to avoid these bad situations when decorating, and at the same time enjoy the fruits of their hard work.

You can get it for free