Wet and dry separation toilet in the bathroom is placed outside or inside

The wet and dry toilet should be placed outside, so as to avoid the embarrassment of the toilet getting wet in the shower. Secondly, it can also effectively prevent the toilet from breeding bacteria due to a large amount of water vapor in the shower area, and in terms of hygiene, it will be more convenient to clean. In addition, it will be safer to leave the toilet outside, such as the elderly or children at home, which can effectively prevent them from slipping due to the wet floor when going to the toilet.

1. How to separate dry and wet in the bathroom.

1. Partition. In fact, the most common method in the bathroom when decorating dry and wet separation is to use partitions to help. We use a partition wall to separate the dry and wet areas, which will not affect the overall lighting, and can also facilitate daily use, and it looks more refreshing, so that the bathroom can be much cleaner.

And on the partition wall, we can also place some small objects, just enough to make use of the space.

2. Shower room.

In fact, the shower room is very popular in the decoration of the bathroom, so that we install a shower room, the water generated by the bath will not splash out, and it is more convenient to clean. And taking a bath in the shower room will have a certain safety and warmth, and the use effect is very good. In this way, the humidity of the floor is reduced, and the service life of the things in the natural bathroom will also increase a lot.

3. Door. Its practical door is used to separate the dry and wet of the bathroom, which can be said to directly open the bathroom independently. The toilet and bathing area is inside, and the daily washing area is outside, so that the moisture resistance can be achieved better, and there is no need to worry about the moisture generated during bathing affecting daily use.

In addition, this can also avoid some embarrassing situations, even if someone goes to the toilet, it will not affect the washing time.

4. Shower curtain. In many cases, the area of the bathroom in some small houses is naturally very small, so we can use the shower curtain to help separate dry and wet. Install a slide rail above the bathroom, so that the waterproof shower curtain can be installed to isolate the bathing area, which is convenient and hygienic, and the ventilation and lighting will not be affected.

1. The dry area is designed outside the bathroom.

Dry area design is a completely separated design scheme outside the bathroom, this practice is usually to put the bathing area and the toilet all in the bathroom, the outside is used as a washbasin, and the middle is directly separated by a door, this scheme is the most thorough and effective, the separate handwashing station area avoids the conflict between the toilet and washing, for the family with more residents, it is very practical, in addition, this design is also very suitable for small apartment types, many owners will think that their bathroom area is too small, there is no way to achieve dry and wet separation, By placing the sink outside the bathroom, you can easily achieve the effect of separating wet and dry.

2. Semi-open separation.

Semi-open dry and wet separation refers to the use of glass or some brick walls to separate the sink, so as to achieve the effect of dry and wet separation, this separation method has achieved a clear division visually, although the dry and wet areas are still in the same space, but the two are completely independent, the effect of this scheme is very good.

3. Shower room.

Bathroom dry and wet separation shower room decoration is also a good program, shower room is a more popular way of bathroom decoration in recent years, owners can customize the size and shape of the shower room according to their own living needs and bathroom structure, the shower room can effectively prevent water vapor diffusion, is a better scheme design in the bathroom dry and wet separation.

4. Use the shower curtain for separation.

In order to reduce the budget, but also to achieve the effect of dry and wet separation, many families will choose to use the shower curtain for dry and wet separation, the installation of the shower curtain is simpler and faster, and at the same time can reduce the splashing of water droplets, and the style of the shower curtain, the style is diverse, the decorative effect is more prominent, so that the effect of the shower curtain blocking water vapor is not very obvious, if the economic conditions are better, it is not recommended to use this kind of amplification of dry and wet separation in the bathroom.

5. Use different ground materials.

The use of different floor materials for dry and wet separation is only to divide the dry and wet areas on the ground, and lay some more waterproof materials on the area where the bathroom is located, and choose materials with more comfortable feet at the washbasin, this method is usually used with the shower curtain, and the dry and wet separation is achieved visually, but the actual effect is not very good.

According to your simple description, it is explained below:

For the decoration of the bathroom to do dry and wet separation of the problem, this should be set according to the size of the large area of the bathroom and the layout of the bathroom sanitary equipment, if the bathroom area is larger, and then do the dry and wet separation when drunk is the toilet as a dry area, of course, if the bathroom area is small, or the structure of the bathroom is more complex, the toilet is best placed in the wet area.

If the dry area is sufficient, it is recommended that the toilet be placed in the dry area.

If you only look at it from the point of view of the smart toilet seat, it is not affected by the separation of dry and wet - it can be installed with or without dry and wet separation. However, if the bathroom does not separate dry and wet, or the toilet is placed in the wet area during the separation of dry and wet (small toilets are generally so dry), you need to pay attention to the following two problems when installing the smart toilet cover. It can be understood that as long as you don't soak the smart toilet seat directly in the water, there is no problem.

The showers, faucets, etc., that we are worried about, do no harm to the smart toilet seat. It can be installed, but it is still recommended that the subject do dry and wet separation, normally speaking, the design of the current commercial housing can meet the design of dry and wet separation!

<> addition to this, when we choose the type of smart toilet seat, we try to choose a smart toilet cover with a three-pole power-off protection plug, because this type of smart toilet seat, once the circuit is dangerous due to any reason, it will automatically cut off the power supply to prevent dangerous accidents from happening! There is no problem with the toilet seat, it is best to buy one with a little brand power, before buying a smart toilet cover, you can check whether the main body of the toilet seat is waterproof, and if the wall socket does not have a waterproof cover, you must install a waterproof cover. Smart toilets choose some waterproof ***, generally good sockets can also play a waterproof and leakage process, in fact, don't worry too much, after all, as long as the bottom line is connected, the three inspections are still very safe.

There are four square meters, and it is impossible to do dry and wet separation, because the developer does the drain is dead, and the drainage on the same floor is good to say, it is a big deal to smash the bathroom floor, and then according to their own preferences, re-layout, dry and wet separation. If it is a drainage under the hetero-laminated board, it is not easy to change the water, first of all, the socket. The smart toilet requires electricity to start, which requires the connection of an outlet.

Toilets are waterproof, and sockets and plugs may not be waterproof. You can install a waterproof box with a waterproof rating of IPX4 or above in the socket, which is much safer. It is not recommended to install it because it is afraid that it will leak electricity if it is drenched with water.

Unless the sprinkler head is a little further away from the toilet.

Absolutely. Because whether to use a smart toilet and whether the bathroom has dry and wet separation are two different things, and there is no connection between the two. If you like smart toilets, you can choose to install them, there is no need to think too much, you can do whatever you like.

No. Because the smart toilet is an electronic product, if it is not separated from dry and wet, it is easy to cause water ingress.

The bathroom can also use a smart toilet if it does not do dry and wet separation, and now many smart toilets are not afraid of water, and the smart toilet with waterproof function can remind the salesperson when choosing.

Dear, hello, I am happy to serve you, the answer is as follows, the so-called dry and wet separation is simply to put the basin outside the bathroom door. The toilet should be put inside the door, after all, you will close the door when you go to the toilet. Another practice is to refer to the Japanese-style Zhenliangyuan practice, and the washbasin shower room toilet is divided into three grids, and each has an independent slag stool, which has high requirements for size.

Wet and dry separation is now a popular design in bathroom design. With traditional bathroom equipment, there is always water vapor everywhere after bathing, and the humid air is retained for a long time, which can cause harm to the body. Dry and wet separation includes handwashing station and bathroom separation; Or the separation of the shower area from the toilet and basin area.

Dry refers to the sink, wet refers to the bathroom. So the wet and dry separation will wrap the toilet inside.

To decorate the bathroom to do dry and wet separation, is it appropriate to place the toilet in the dry area or in the wet area?

Dry area. There is less water in the dry area and it is not easy to slip, but if it is installed in the wet area for more privacy, it can be installed according to the needs. The traditional toilet is mainly divided into three areas, the toilet area, the sink area, and the shower area (not counting the laundry area) should consider the area allocation of these three areas when separating dry and wet.

Therefore, the bathroom must have at least enough area to do dry and wet separation, the width of the washbasin is about about about that, the length (related to the depth of the bathroom door) is also about this range, and the toilet area plus the washbasin area is about no more than 4. Coupled with some transition areas, then the whole bathroom must be at least 6 or more to do dry and wet separation. Precautions for decorating the bathroom, the most important thing for the separation of dry and wet in the bathroom is to put the foundation waterproof engineering mausoleum in place, so as to play the role of dry and wet separation.

When laying bathroom tiles, the foundation engineering of waterproof coating should be done, and the next step before renting can be carried out after passing the waterproof test, as for the choice of waterproof coating, it is best to choose a well-known paint brand, and the construction process can not be careless. The separation of functional areas is to divide the space according to the characteristics of the dry and wet area, and most of the moisture in the bathroom comes from the shower area, which will not only make the surrounding space more humid, but also affect the use of other areas, so it is necessary to separate an independent shower room. If the sanitary and clean room at home is relatively large, you can design an independent bathroom, and then design the sink outside the bathroom.

If there is no dry and wet separation in the bathroom, can I use a smart toilet?

Hello dear. Your question is answered as follows. OK.

Even if the bathroom does not separate dry and wet, it is possible to install a smart toilet. Whether a smart toilet is installed in the bathroom is actually the same as whether the bathroom is. Even if the surface of the smart toilet is accidentally splashed with water, the smart toilet will not be affected.

As long as it is not to put the smart toilet thoroughly. From the perspective of smart toilets, smart toilets are not affected by dry and wet separation, so regardless of whether there is dry and wet separation in the bathroom.