How to clean the moldy black spots on the toilet seat, and how to clean the mold spots on the toilet

1. You can use detergent to remove, first squeeze a little detergent on the toilet seat, then wipe it with a rag, and finally rinse it with water, you can remove the moldy black spots on the toilet seat. When using detergents, it is necessary to pay attention to prohibiting detergents with strong acids and carbon to avoid damage to the toilet seat. 2. Baking soda can be used.

To remove, mix baking soda with water in a certain ratio, and then dip some soda with a toothbrush.

Just wipe the toilet seat. 1. How to wash the toilet seat? 1. You can first descale the baking soda Sprinkle 1 2 cups of baking soda in the toilet, and then brew half with hot boiled water to remove the lighter dirt.

Clean the toilet bowl frequently with baking soda before it has stubborn yellow rust spots. Sprinkle baking soda on the inside of the toilet bowl and place it for 10 and wash it with a toilet brush. If stubborn stains have formed, they can be used with vinegar solution, soaked thoroughly and cleaned with a brush.

2. The moldy black spot cleaning of the toilet seat should be tried with a cloth dipped in alcohol, which should be able to be wiped off, and the toilet seat is generally better cleaned with ceramic. It is also recommended that you pay attention to the bathroom or washroom regularly.

Ventilation and dehumidification are carried out, and exhaust fans are opened.

This greatly reduces the probability of mold. 2. How to remove the yellowing of the toilet gasket? 1. White vinegar cleaning:

Pour the vinegar-water mixture into the toilet seat, soak it for half a day, and the dirt will be wiped off. 2. Sandpaper cleaning: Rub the yellowed area of the toilet seat with sandpaper to remove dirt.

3. Baking soda cleaning: Sprinkle baking soda on the toilet seat and soak it with heat for half an hour, and the dirt can be brushed off. 4. Bleaching powder solution cleaning

Wipe with bleach first, then rinse with water. In addition, if there is dirt on the inside of the toilet bowl and it is difficult to clean it with a brush, it is recommended to tie nylon socks to a stick, dip them in foaming detergent and scrub them, and clean them once a month to keep the inside of the toilet bowl white.

The toilet seat is usually made of plastic, if it has moldy black spots, then I suggest that you better clean it with a cleaner, so that it is easy to remove, if the cleaner is not able to remove it, it can only be replaced with a new toilet seat.

Materials needed to remove mold spots from toilet seats:

Gloves, toilet cleaner, steel wool, brushes, shower heads.

Specific steps to remove mold spots from the toilet seat:

1. First of all, open all the doors and windows of the toilet or toilet to keep the ventilation smooth, so as to dissipate mildew;

2. Spray the prepared toilet cleaner (alcohol, washing powder, cleaning liquid) towards the toilet lid, try to be even, don't spill too much, and wear gloves;

3. Wait for about five minutes after spraying, clean with a brush or steel wool ball, the steel wool ball is better to clean, wipe towards the edge of the toilet cover, and rub it repeatedly;

4. If there is a water hose or shower head at home, you can take the shower head to rinse directly against the toilet lid, and wipe it with a rag while flushing;

5. After completing the first step, finally wipe the toilet lid with a rag without residual water stains to prevent mold again.

1.Opening the doors and windows of the bathroom to maintain a cool and ventilated environment can effectively inhibit the growth of mold.

2.Wear cleaning gloves and put the toilet cleaner on the mold and let it stand for about 10 minutes, so that the toilet cleaner can effectively dissolve the mold.

3.Scrub the mold repeatedly with a brush until all the mold is removed, and then clean the surface with clean water to remove any remaining stains.

4.Use a dry rag to wipe the water stains on the surface of the toilet bowl to avoid mold spots again.

Open all doors and windows in the restroom to keep it ventilated and emit musty fume;

Spray alcohol, laundry detergent, and cleaning liquid on the toilet lid, try to be as even as possible, and wait five minutes;

Use a brush or steel wool ball to rub the moldy area of the toilet seat repeatedly, and finally rinse it with clean water.

1. Before cleaning the toilet seat, ventilate the room. Open all the windows in the room and remove everything that is placed on the toilet tank;

2. Wear household rubber gloves;

3. Rinse the toilet with clean water first, and then open the toilet lid;

4. Apply toilet cleaner or 84 to the moldy part of the toilet seat and moisten it with water 5. Be careful not to mix detergents, because different types of detergents will produce toxic gases after mixing;

6. Brush the moldy parts with a brush;

7. After brushing with a brush, rinse with water.

The first thing you have to do is to clean the toilet lid, in fact, it is not difficult, you just need to remove the toilet lid, and then soak the toilet lid in vinegar water for half a day, and then wash it with clean water.

If you want to clean the toilet seat for mildew, you can use baking soda, cleaning essence, vinegar, stir well, and clean it to remove mildew.

Spray some toilet cleaner or baking soda on the mold on the toilet seat, and brush vigorously with a toilet brush repeatedly until it is clean.

First of all, use a detergent to accompany you, wash it with a rag and then spray it with alcohol.

What you need to prepare: a cup, baking soda, cola, a watering can, a paper towel.

1. Start by pouring an appropriate amount of baking soda into a disposable cup.

2. Then pour an appropriate amount of cola into a disposable cup.

3. Pour the liquid from the cup into a watering can for use.

4. Next, spray the liquid in the watering can on the moldy part of the toilet lid.

5. Then wipe the toilet lid clean with a paper towel.

6. Finally, the moldy toilet lid is cleaned.

1.Before cleaning the toilet, ventilate the room. Open all the windows in the room and remove everything that is placed on the toilet tank;

4.Pour toilet cleaner into the inner wall of the toilet in a wrap-around motion, close the toilet lid and soak for a few minutes. During this period, the outside of the toilet bowl was cleaned.

5.Wipe the outside of the toilet with disinfectant, and do not leave out the water tank, flush button, toilet rim, and toilet washer.

8.Now open the toilet lid and use a toilet brush to scrub the inner wall of the toilet, especially the various outlets inside the toilet, and focus on cleaning.

9.Press the water dispense button, flush the toilet again with clean water, and flush the toilet brush with the water used to fill the toilet. The toilet bowl is cleaned.

If the toilet seat is moldy, the best way is to use a steel wool ball, rub off the top, and then rinse it with water.

I think the toilet seat is moldy, it is best to use 84 disinfectant with dish soap to clean it is the most convenient, and you can use a brush to flush it with water.

The toilet lid can be removed, if it is not convenient to clean on the toilet, you can remove it, put it in the laundry basin and add laundry detergent, clean it with a brush, and clean it on the installation.

Soon it became moldy, how to clean it I think use strong laundry detergent, if you really can't write it, replace it.

The toilet seat is moldy, how to clean it Soak it in laundry detergent or detergent for a while and then wash it.

It is recommended that you use 84 disinfectant to clean, which can disinfect and remove mildew, otherwise it will bring hidden dangers to health.

You can wipe it with a toilet cleaner and rinse it with clean water.

Here's how to remove dirt from the toilet bowl for a long time:

1.Vinegar descaling method: pour the mixture of vinegar and water into the toilet, and after soaking for half a day, the scale will be brushed off.

2.Sandpaper descaling method: Use the finest sandpaper to rub the toilet dirt to remove the dirt that the detergent can't remove.

3.Baking soda descaling: Sprinkle baking soda on the toilet bowl and brew it with hot boiled water for half an hour to brush off the dirt.

4.Bleaching powder solution descaling method: wipe it with bleach solution first, and then rinse it with water after a while.

5.Homemade small brush to scrub the toilet: the flush toilet produces yellow dirt, which is difficult to clean with a brush, you can tie the waste nylon socks to one end of the stick, dip it in foaming detergent to scrub, clean it for 1 month, and keep the toilet white.

6.Detergent descaling: Put an appropriate amount of water in the toilet bowl first, clean it with a toilet brush, then pour in 5-10 ml of detergent or hydrochloric acid solution, apply it evenly with a brush and then scrub it.

If the dirt is heavy, you can pour a little more detergent to soak and brush until it is clean. Hydrochloric acid is very corrosive, if you clean it with hydrochloric acid, you should pay attention to safety and do not splash on it.

How to remove the black substance from the toilet bowl? I think if the toilet has a black stain. You could use some cleansing spirits. Use a brush to brush the toilet. To some cleaners, brush vigorously in the black area of the toilet, and finally flush it with water. That's it.

How to clean a lightly soiled toiletFor a toilet bowl that is not too dirty, you can spread toilet paper one by one on the inner wall of the toilet, then spray it with detergent or leftover Coke, let it stand for an hour, and then flush it with water.

You can wash it with some bleach and wash it with disinfectant water.

To remove the black dirt from the toilet, you can use toilet cleaner or excellent detergent for a full cleaning.

What you need to prepare: a cup, baking soda, cola, a watering can, a paper towel.

1. Start by pouring an appropriate amount of baking soda into a disposable cup.

2. Then pour an appropriate amount of cola into a disposable cup.

3. Pour the liquid from the cup into a watering can for use.

4. Next, spray the liquid in the watering can on the moldy part of the toilet lid.

5. Then wipe the toilet lid clean with a paper towel.

6. Finally, the moldy toilet lid is cleaned.

Before cleaning the toilet, ventilate the room.

The treatment of moldy toilet seat is as follows;

Tools Raw materials.

Gloves, toilet cleaner, brushes, shower heads.

1. Open all the doors and windows of the toilet or toilet to keep the ventilation smooth.

2. Spray the prepared toilet cleaner towards the toilet lid, try to be even, don't spill too much.

3. Wait for about five minutes after spraying, wash with a brush, wipe towards the edge of the toilet lid, and rub repeatedly.

4. You can take the shower head to rinse directly against the toilet lid, and wipe it with a rag while flushing.

5. Finally, wipe the toilet lid with a rag without residual water stains to prevent mold again.

Try it with toilet cleaner or alcohol. It should be wipe-off.

If there are mold spots in the toilet, it means that the bathroom environment is relatively humid, and you should pay attention to regularly ventilating and dehumidifying the toilet or washroom and opening the exhaust fan, which can greatly reduce the signs of mold.

The toilet is a place that needs to pay attention to hygiene, not to mention that mold has an impact on the body, and it is not good to pay attention to hygiene.

If you want to use medicine, it is recommended that you use Mr. Vermeer toilet cleaning liquid, and if you want to use household tricks, it is recommended to use vinegar, preferably Zilin vinegar from Shanxi.

Mix a cup or 250ml of white vinegar with a little baking soda powder and pour it into the toilet, wait for 10 to 15 minutes, wipe off the stain with a long-handled brush, and then rinse with water to make the ridge. Pour a can of Coke into the toilet bowl and flush it off after an hour, the citric acid in the Coke will remove the stain from the ceramic glaze. If the yellow or black dirt forms on the edge of the toilet, you can tie the used nylon socks to one end of the stick, brush them with foaming detergent, and wash them once a month.

1. Mix a cup or 250ml of white vinegar with a little baking soda powder and pour it into the toilet, wait for 10 to 15 minutes, wipe off the stains with a long-handled brush, and then rinse with water.

2. Pour a can of Coke into the toilet bowl and flush it off after an hour, and the citric acid in Coco Pure Music will eliminate the stains on the ceramic glaze.

3. The yellow or black dirt formed on the edge of the flush toilet can be tied to the end of the waste nylon socks on the wide seepage of the stick dust, brushed with foaming detergent, and cleaned once a month to keep the toilet white.