What should I do if the graphics card fan has a strange sound and the graphics card fan is buzzing?

After turning on the machine, there is a "whirring" wind sound in the case, which is the sound of the fan working normally. If the sound is loud and sharp, like the "roar" of a motor or a chainsaw, it is the sound of dust accumulation of the fan or the lack of oil on the shaft, most of the time it is loud when it is turned on. Workaround:

Of course, it is easy to replace it with a new one, but sometimes it is a pity to scrap it after a simple treatment, so it is better to brush the ash and try it with some oil, which can save some silver and enjoy the fun of doing it yourself. In fact, it is very simple: you can use a small brush or a large oil brush to brush and blow while brushing (it is best to have a "leather tiger" for blowing ash, you can also use a hair dryer to hit the cold air gear, or even use a pump to install a "gas needle" to play basketball); To apply oil, uncover the circular covering film in the middle of the fan, let the shaft be exposed, and drip a little high-grade lubricating oil (car lubricating oil, sewing machine oil, and transformer oil are fine, but do not use cooking oil, because the cooking oil will be sticky for a long time and affect the operation of the fan), and then cover the film.

After brushing and oiling, the problem is not solved, and it is not too late to change to a new fan.

There is too much ash, and it usually takes about 2 years to have this situation.

It is recommended to spend more than a dozen dollars to change the fan, but it is best to take the graphics card when changing the fan, because some fans are different in size and specifications.

Try some lube.

Causes and solutions of high fan noise of graphics card:

Graphics card fans are noisy because there is too much dust in the fan blades or a lack of oil in the bearings, and the bearing holes are worn out - the gap between the fan's shaft and the bearing is too large. The fan moves axially after rotating, and the plane of rotation of the fan blades is also shaking, which not only aggravates the wear, but also produces a lot of noise.

1. First of all, use a brush to clean the dust on the fan to avoid dust entering the bearing. Dust is the biggest killer of graphics card fans, and it is recommended to clean the computer once every 3 to 6 months to prevent the computer from malfunctioning due to dust.

2. Remove the fan, open the sticker on the fan, add some sewing oil to the bearing, and be careful not to add too much.

3. Finally, install the fan back on the graphics card. Plug it in and try it, you will find that the sound is much quieter, and it can be used for a while. However, it should be reminded that although the sound is quieter, the speed will drop slightly due to the limited accuracy of the manual.

How the graphics card fan works.

The balance of the impeller is very critical to the vibration and noise of the electric pump, and in order to improve the product quality, the impeller is balanced more positively. The weight tolerance of the single-sided unbalance must be controlled below 2 grams, which not only ensures the balanced rotation of the impeller, but also reduces the vibration caused by the impeller unbalance, and also reduces noise, reduces radial force, and prolongs the service life of the bearing. In addition, for the unbalanced deduplication of the impeller, we use the turning deduplication with a smooth transition on the impeller surface, which aims to reduce vortex, reduce hydraulic loss, and improve hydraulic efficiency.

Summary. How to solve the squeak of the graphics card This is the howling of the graphics card, the howling mostly appears on the high-end ultra-public version of the graphics card, the current graphics card performance is getting higher and higher, and the ultra-public version or overclocking will cause a significant increase in the power consumption of the graphics card, at this time the graphics card has to need a lot of current to **, at this time, the large current makes the inductance and its own frequency resonate, making a squeaking sound, which is the howling. This is a quality problem, so replace it after sale.

4.The graphics card has loud noise, and there are generally the following situations: 1. There is a lot of dust.

2. If the fan is broken, you need to add oil or lubricant in the fan ball bearing (there is no guarantee that it will not hurt the graphics card, because there will be oil or lubricant leaking out when the fan rotates). Workaround:1

Change the graphics card. 2. Change the graphics card for heat dissipation. (It is not recommended to change the heat dissipation, now the heat dissipation of the graphics card is dozens of better), 3

Replace the graphics card fan (it is generally difficult to buy the fan of the old graphics card).

Hello! Reasons and solutions for the sizzling sound of the graphics card fan, and possible reasons for the sizzling sound of the graphics card:1There is electromagnetic interference next to the sound output device; 2.Aging of sound output equipment; 3.Sound-related hardware acceleration settings issues;

4.When the graphics card reaches a high load when playing games, the acoustic noise generated by the operation of the chip is normal; If it is caused by sound output, you can refer to the following solutions; Solution 1: There is electromagnetic interference next to the sound output device, poor contact of the audio interface, etc., for example:

Mobile phone interference, speaker interface is not plugged in firmly, etc. Solution 2: The sound output equipment is aging, and if the sound is too loud, it will emit a whistling sound, and the sound output equipment such as the sound output device will be replaced.

How to solve the squeak of the graphics card This is the howling of the graphics card, the howling mostly appears on the high-end ultra-public version of the graphics card, the current graphics card performance is getting higher and higher, and the ultra-public version or overclocking will cause a significant increase in the power consumption of the graphics card, at this time the graphics card has to need a lot of current to **, at this time, the large current makes the inductance and its own frequency resonate, making a squeaking sound, which is the howling. This is a quality problem, so replace it after sale. 4.

The graphics card has loud noise, and there are generally the following situations: 1. There is a lot of dust. 2. If the fan is broken, you need to add oil or lubricant in the fan ball bearing (there is no guarantee that it will not hurt the graphics card, because there will be oil or lubricant leaking out when the fan rotates).

Workaround:1Change the graphics card.

2. Change the graphics card for heat dissipation. (It is not recommended to change the heat dissipation, now the heat dissipation of the graphics card is dozens of better), 3Replace the graphics card fan (it is generally difficult to buy the fan of the old graphics card).

Hello! The above are the reasons why the graphics card fan has a sizzling sound and how to solve it.

Solution to the noisy fan of the graphics card:

1. Clean the main heat dissipation area of the computer. Cleaning up the dust in the computer can effectively reduce the heat generated by the computer, thereby reducing the frequency of the graphics card fan to achieve the effect of noise reduction.

Since the design of each computer is different, the design of the air outlet and the graphics card fan are also in different positions, so you need to clean them according to your own computer.

2. There is a lot of dust gathered on the air outlet, and it is best to remove the heat dissipation components to clean up, but it is more troublesome to re-apply silicone grease to the CPU and chipset, and some machines have not passed the warranty period, so the removal will lose the warranty, you can first use a brush to gently stick away the large pieces of dust, and repeatedly blow off the dust on the surface with an air blower.

3. When buying a graphics card, you can also pay attention to the diameter of the graphics card cooling fan, now many brands of graphics cards have adopted a heat sink design that exceeds the height of the general graphics card, which can be equipped with a larger diameter cooling fan, and the noise of these graphics cards will undoubtedly be lower.

4. Some computers are set up with a one-key mute function. When the computer is under high load, the fan speed of the graphics card is very high, and the noise is very high, through shortcut keys or some random software, the fan speed can be reduced instantaneously to achieve the purpose of mute, of course, the frequency of the CPU will inevitably be reduced, and the performance will be affected.

5. You can first clean the dust on the graphics card fan, then add some butter to the bearing, then seal the oil seal tightly, add some butter, and finally install the fan back on the graphics card. You will be able to reduce the noise of the graphics card fan.