What to do if the waterproof foot of the bathroom wall is damaged?

If the waterproof foot of the bathroom wall is damaged, you can touch some waterproof glue to fill the open seam, and there will be no water leakage.

The corner of the bathroom is damaged by waterproofing, and if you want to deal with it, you can continue to make waterproof ointment, and there is a glue, and then pour it into the gap, which can be repaired.

If you live in the corner of the bathroom of the building, the waterproof is damaged, you should redo the waterproofing, otherwise it will leak, which is not hygienic, but also causes a water leak downstairs and will affect the relationship between neighbors.

You can only re-waterproof the damaged area and brush it with waterproof paint.

The waterproofing of the bathroom has been damaged, and it should be repaired again, and all the tiles in these bathrooms should be turned over and waterproofed again.

The waterproofing of the bathroom wall foot is damaged, and the waterproof linoleum must be repaired immediately to avoid water leakage.

The waterproofing of the corner of the bathroom is damaged, how to deal with it? The easiest way is to ask a professional to do waterproofing to deal with it, because they have both tools and materials, and they can complete this thing in a very short time. So ask someone to help you out!

The waterproofing in the corner of the bathroom wall has been destroyed, and it is good to pry up all the floor tiles and make a new waterproof.

First of all, you have to re-apply the powder in the corner of the wall, and you can put some waterproof glue and make some porcelain tiles to stick.

If the waterproofing of the corner of the bathroom wall is damaged, then it must be knocked off again, and then waterproofed.

If the waterproof baseboard of the bathroom is damaged, then first disassemble the baseboard, and then re-waterproof the place, and do it as a whole, without any omission.

If you find that the waterproofing of the corner of the bathroom is damaged, then you can only do it again.

The waterproofing of the corner of the bathroom wall has been damaged, and how to deal with it should be re-done. Add a layer of waterproof, and add a layer of that glue on top can also be waterproof.

The waterproof is damaged, then you must remember to repair it as soon as possible, otherwise his bathroom is more humid, and I am easy to cause further damage. If you want to repair it, it's better to go to the place where you did the bridge to repair it.

In the case, you can use the kind of waterproof material that is painted to paint it, and the paint is thicker.

You can re-do a layer of waterproofing on top of it, and that's it.

The waterproofing of the corner of the bathroom is damaged, how to deal with it? Hurry up and find a worker to do waterproofing, don't look at it, it's just that the corner of the wall is damaged, and once the water flows, it will also flow downstairs.

The corner of the bathroom is damaged by waterproofing, so you must find someone who specializes in waterproofing to do waterproofing. Fix it.

If the waterproofing of the corner of your bathroom is damaged, you can only re-waterproof it in the damaged place.

Generally, the wall of the bathroom is found to be damaged, and it must be redone, waterproof, or it will not be very troublesome, and a little route will be involved.

The waterproofing damage can only be reworked, all the tiles are chiseled, and the waterproofing is all redone.

The waterproofing of the corner of the bathroom has been damaged, and I think it is good to redo the waterproofing.

In the process of doing this, you need to dismantle and redo it again so that it can be restored.

If the waterproofing of the bathroom wall foot is damaged, it needs to be re-waterproofed, otherwise it will be difficult to deal with the problem in the future.

The waterproofing of the corner of the bathroom is damaged, how can the waterproofing of this bathroom not be destroyed? You're involved in a water leak downstairs and you have to put it aside again and redo the waterproofing.

The corner of the bathroom, the waterproofing is damaged, this can only be reworked, you have no other way.

What to do if the yellow water in the corner of the bathroom is damaged. You should immediately find the relevant personnel to repair it, and you should open the rice and discard the old one, so that you can dispose of it.

Now there is a new waterproof paint, just buy a little and apply it yourself.

The waterproof wall in the corner of the bathroom is damaged, and it can be compensated for with that kind of Gaode exterior brush waterproofing.

The bathroom is most afraid that the waterproofing is not good, the wall foot is damaged, and only the waterproofing is done again, otherwise it is very troublesome.

If the waterproofing of the bathroom is not done well, it is to seep water downstairs through the cement and seep water down. The waterproof layer of the bathroom floor is damaged, which does not mean that it will definitely leak. We all know that as long as the ground stays dry, there is no possibility of water leakage.

In the same way, even if the waterproof layer is good, if the ground is waterlogged for a long time, there is still a possibility of water leakage and seepage.

If there is a problem with the waterproof layer of the bathroom, then you must be careful when taking a shower and washing clothes, and clean the floor immediately after washing, so that you don't have to worry about water leakage.

Water leak repair

Generally speaking, it is only a temporary and emergency measure to make up for the non-leakage with cement, because the non-leakage of water is a rigid waterproofing and cannot resist some settlement deformations and cracks. However, this problem also depends on whether the smashed tiles are wall tiles or floor tiles.

This is usually not a big problem for walls, because there is no water pressure and the water on the wall can easily run away. In the case of confirming that the water pipe is repaired in good condition, the cement is repaired without leakage, and the tile is paved and then repaired, which can basically solve the problem of water leakage.

Floor tiles. The situation is much more complicated, as water on the wall will flow to the ground very quickly, and the water on the ground will not flow away as quickly as the wall. That is to say, the waterproof requirements of the ground are much higher than that of the wall, and the wall is more important than moisture-proof.

If the tiles are smashed on the ground, the best way to deal with them is to open all the floor tiles, clean them up and redo the flexible waterproofing, and then do a water storage test.

There is no problem with tiling later.

Man-made damage, waterproof is not good, if you are not careful to protect it, it is easy to have problems. Man-made damage is unintentional, such as hammering, iron nails, etc., in fact, the waterproof layer is a thin layer of polyurethane or modified asphalt with millimeter thickness. There are two main phenomena of water seepage, one is the non-standard waterproof practice, and the other is caused by man-made damage.

Waterproof practices are not standardized this problem is big, the building developer does not pay much attention to this aspect, their purpose is to hand over the house as soon as you sign them will be delivered, for them everything is fine, and then there is a problem is your business, they only charge maintenance fees, and it is very expensive.

The waterproof layer is damaged, the bathroom, can it be repaired.

Pro, you can repair it, 1. First of all, you must remove the old floor tiles and clean them up. 2. The ground is sloped with cement mortar in the direction of floor drainage, but the surface should be flat. The slope near the entrance is small, and the slope near the floor drain is large.

3. The pipeline passes through the root of the floor slab and near the floor drain to strengthen waterproofing. The pipe root building sealing paste is tightly sealed, and the cement is smoothed after the foot guard, and when the waterproof coating is brushed, the glass wire cloth is reinforced with 1 or 2 layers. 4. The wall surface is clean and flat, without floating ash and small particles, and the junction of the wall and the ground is wiped with small original corners or slope corners.

When brushing waterproof coating, paste a glass cloth reinforcement layer of 1 or 2 layers to cover this. 5. The total thickness of the polyurethane waterproof coating film is required to be more than millimeters. It can't be decided by the number of passes.

The pipe root and the corner of the reinforcing layer are brushed first, and after the surface is dried at room temperature for 4h, then a large area is brushed and scraped. There shall be no leakage and bubbling. Brush a large area for 24 hours and then apply the next layer after curing.

6. Paint the façade first and then paint the plane, and the next painting direction is perpendicular to the previous one. When the final coating film is semi-cured, the coarse sand particles are thrown to facilitate the combination with the cement mortar in the future. 7. The waterproof layer on the ground should be painted out of the bathroom door 300mm wide.

The waterproof layer of the waterproof ground should be higher than the ground, and the closed water test should be done for 36 hours according to the requirements.

The bathroom is a cement wall and brushed with waterproof and then pasted tiles, there is a problem when installing the shower, you need to knock off part of the tiles, knock when you destroy the waterproof, how to deal with the waterproof layer when the bathroom is decorated? Let's go to understand the cause of water seepage in the corner of the outer wall of the bathroom and the repair of the damaged waterproof layer.

Many users may have a misunderstanding, that the bathroom waterproof layer is damaged will only leak to the downstairs, in fact, this is not the case, the waterproof layer is divided into the horizontal waterproof layer and the vertical waterproof layer on the side, the horizontal waterproof layer leaks downstairs if there is a problem, and the vertical waterproof layer on the side leaks to their own home if there is a problem.

Causes of water seepage in the corner of the outer wall of the bathroom or at the door of the bathroom:

Water leaking into the corner of the outside of your bathroom or the bathroom door is first sure that the vertical waterproof layer on the side is broken somewhere, otherwise no matter how much water can only come up from your tile surface. In fact, the damp marks we see in the corner of the bathroom outside or at the door of the bathroom are not vertically leaked over, theoretically speaking, as long as the waterproof layer is damaged somewhere, the water in the bathroom penetrates below the tile surface from the corner, tile surface and joints or any other possible place, and concentrates on the mortar layer, then the mortar layer is equivalent to becoming a water layer, and then concentrates on the waterproof layer to leak downstairs.

Note: The damp and mildew of about 50 cm from the ground to the outside wall of the bathroom is caused by water seepage on the bathroom floor, not the wall water seepage. There are many unprofessional people, and simply repairing the wall will definitely not solve the problem.

Method: The vast majority of the bathroom leaks to their own home, it is useless to treat the whole surface, only the whole ground is completely free of water can penetrate into the mortar layer below the surface of the tile, there will be no water seeping into the damage of the waterproof layer, so that the problem of water leakage is solved.

Reasons for water seepage downstairs in the bathroom:

When the water leaks downstairs, the first thing you can be sure of is that the original waterproof layer of the ground is damaged somewhere, otherwise no matter how much water leaks downstairs, it will not leak downstairs. It can only seep into your tiled surface, or into other rooms of your own home.

Theoretically, as long as the waterproof layer is damaged somewhere, the open water in the bathroom penetrates below the tile surface from the corner, tile surface and joints or any other possible place, and concentrates on the mortar layer, then the mortar layer is equivalent to becoming a water layer, and then concentrates on the waterproof layer to leak downstairs.

Method: The vast majority of the water leakage to the downstairs, the treatment point is useless, the whole surface has to be treated, only the entire ground is completely free of water can penetrate into the mortar layer below the surface of the tile, there will be no water seepage to the damage of the waterproof layer, so that the problem of water leakage is solved.

The above are some insights on the water seepage on the bathroom wall, and finally it is worth mentioning that no matter what the bathroom decoration is, it is necessary for us to understand the common sense of bathroom decoration. I think that in order to effectively implement the precautions for bathroom decoration, we must have some toilet safety knowledge, so as to avoid accidents that should not occur.

If the bathroom waterproofing is really a nuisance, whether it is for our own safety or neighborly relations and floor safety, we have to do a waterproofing project for the bathroom. What should I do if the bathroom is waterproof?

What should I do if the bathroom is waterproof? Here's how:

1.Start by removing the old floor tiles and cleaning them up.

2.The ground uses cement mortar to find the slope of the ground in the direction of drainage, but the surface should be flat. The slope near the door is small, and the slope near the floor drain is large.

3.Pipes are worn at the root of the floor and near floor drains to enhance waterproofing. The pipe root sealing paste is sealed, the cement is leveled, the state is coated with a waterproof coating, and the glass wire cloth is reinforced by 1 or 2 layers.

What should I do if the bathroom is waterproof? 4. The wall is clean and flat, no floating ash, small particles, and the wall and ground are wiped at a small angle or inclined angle. When brushing with waterproof paint, paste the reinforced glass cloth layer in 1 2 layers.

5.The total thickness of the polyurethane waterproofing coating film needs to be or greater. The number of passes cannot be determined.

First, brush the root and corner reinforcement layer of the tube, dry at room temperature for 4 hours, and then brush and scrape a large area. Must not slip or bubble. Apply a large area after 24 hours of curing, then apply a layer.

6.First, the façade is drawn with the rear brush plane, and the next channel is brushed in a direction perpendicular to the previous one. When the film is sub-cured for the last time, the sedan does not produce coarse sand in order to be combined with the cement mortar in the future.

7. The waterproof layer on the ground should be coated 300mm wide outside the bathroom door. The waterproof layer of the waterproof floor should be 200mm above the ground.

8.Perform a 36-hour closed water test as needed.

What should I do if the bathroom is waterproof? By introducing the chefs and kitchens mentioned above, I'm sure you have a general idea. When renovating, waterproofing must be done with special care, especially in the bathroom, as it consumes more water.

What should I do if the bathroom is waterproof? You need to find the leak first. If it is a floor drain, a local leak near the pipeline, you can repair the local epoxy resin in the sail mu, **within 300.

If there is a problem with the waterproofing layer underneath the tile, basically the previous tile and the bottom layer need to be removed as a whole (because this leak point is not easy to find, if it is insurance, then do the whole. Re-waterproofing and tiling, this ** depends on the cost of dismantling and the quality of the waterproofing material and bricks, which is nearly 1500?2000 (including demolition, waterproofing, tiles and other materials, with an area of less than 10 square meters).

This time, a 48-hour waterproofing experiment is required to make a waterproofing test, and after receiving the waterproofing, a protective layer is first made on the waterproof surface.

You can get it for free