The square meter of the bathroom is too small, how to separate dry and wet?

If there are no elderly people or people with inconvenient mobility in the house, then do not install toilets, it is best to choose squatting toilets, because this can save space to a great extent, and can better realize the separation of dry and wet. The position of the squatting toilet is located in the lowest place of the entire bathroom, and it is used as a drain, so that the ground water can flow quickly to the squatting toilet, and there will be no water accumulation in the bathroom.

When pasting the floor tiles, it should be pasted from the highest place to enter the door, and then the lowest place of the floor drain and the surface device, we must ensure that the high-speed water can flow smoothly to the squatting toilet or floor drain, and it is necessary to start from the floor tiles to separate dry and wet. It is best not to do a shower room, because the space of the bathroom is relatively small, if you want to make a shower room, then you also need to make bath towels, toilets, bathroom cabinets, etc., so that your bathroom may not be able to turn at all, it is too narrow.

Although it is not possible to make a shower room, we can install water strips and shower curtains, because last year it can be moved, especially suitable for blocking in this kind of small toilet. It's a very simple and efficient method, and it's especially easy to install. Put a clean footcloth at the door of the bathroom, you can solve the moisture after we take a bath, so you don't have to worry about us washing dirty inside, and then take it to the living room or bedroom.

Generally speaking, the bathroom is relatively smooth, so the tiles on the ground must be non-slip, so that we are not easy to fall when taking a bath or going to the toilet, and we must avoid putting some sharp materials inside, otherwise it is likely to cause accidents. Nowadays, the house is expensive, so there are many people whose area is not particularly large, so we have to try to save space. Now there are many such decoration methods on the Internet, you can take a look at it more and refer to it.

I think you should install the shower in the corner of the bathroom and hang a shower curtain in this corner so that it can separate the wet and dry and not take up too much space.

It can be separated directly with a curtain, or it can be made with a sliding door, it can also be separated by glass, or you can buy a closed shower unit directly.

I think it is possible to install a shower curtain in one corner of the bathroom, so that the dry and wet can be separated.

The shower curtain can be said to be the simplest and most beautiful way to separate the dry and wet of the bathroom in a small apartment. On the one hand, the shower curtain is cheap and easy to use; On the other hand, the shower curtain is very easy to install and disassemble, and can be matched with the original design structure to the greatest extent. However, the disadvantage is that it cannot effectively block water vapor, and water stains splashed on it are easy to grow mildew, and they need to be cleaned frequently.

When decorating, we must do a good job of separating dry and wet, pay attention to the separation of the toilet and the bathing place, and then you can also choose the appropriate location of the floor drain, and the sink can choose a built-in sink, so that the function of storage can be met, and some toiletries can be placed under the sink.

Some glass doors can be used for partitions, so that dry and wet can be separated, and the bathroom can be used better, and it can also make the bathroom look more spacey.

You can install a glass partition directly in the shower area of the bathroom, which not only makes reasonable use of space, but also separates dry and wet.

Installing shower curtains and shower doors can separate dry and wet, and you can also move the wash basin to the outside of the bathroom, or install a collapsible partition directly in the bathroom.

The bathroom is a relatively humid environment, and after people take a bath, the whole bathroom will be filled with water vapor, and the water will be splashed everywhere when taking a bath, and people will slip if they are not careful, so people want to have a bathroom with dry and wet separation, but many people buy a house with a relatively small bathroom area, not the design of dry and wet separation, and they have to find their own way to achieve dry and wet separation.

The area of the bathroom is small, if you want to do a good job of dry and wet separation, you can install an arc-shaped slide on a small area of the sanitary partition, and then install the lifting ring, make the shower curtain in the choice of waterproof materials, and then hang the shower curtain on this slide, pull the shower curtain over when taking a bath, separate a space, and after taking a bath, you can open the shower curtain and restore it to the original appearance of people, so that it will not occupy too much area, but can achieve dry and wet separation.

The bathroom area is small, and the dry and wet separation can also be achieved through the shower door, and now the shower, the door has a straight type, diamond type or arc shape, and what kind of door to choose can be decided according to the planning of the shower area. The shower door can effectively isolate the water, and the other practicality is much better than the shower curtain, now the straight and curved shower door is more common, they can be made into a push-pull design, close the sliding door when using, after use, you can open it at the door and add a piece of suction piece, which can more effectively isolate water stains.

The bathroom area is small, and there is a way to separate dry and wet, which is to move the wash basin to the outside of the bathroom during the decoration design, so that the bathroom becomes a shower area, and the toilet is retained, so that the moisture generated during the bath will not affect people's normal life, and it will not affect the washing of others when someone goes to the toilet in the morning, which is also a very practical and convenient design. The bathroom can also be installed with a foldable partition with waterproof performance, and the partition can be pulled over when taking a shower, which can play a role in separating dry and wet. No matter which method is chosen for the design of dry and wet separation, it is necessary to pay attention to the existence of floor drains, and be sure to keep a floor drain in the shower area, otherwise the wastewater will not be discharged normally when bathing.