How can a small bathroom be divided into dry and wet areas?

We all know the importance and practicality of wet and dry partitions in the bathroom, such as keeping the bathroom dry, preventing moisture from damaging bathroom appliances and wooden bathroom cabinets, and staggering the areas where the family uses the bathroom. But now many houses in China are not very reasonable in the design of the house, often the living room is very large, the kitchen and bathroom area is pitifully small, 3 square meters of size is good. So how to do dry and wet partitioning in the bathroom of a small apartment?

Here are 15 real pictures of small bathroom decoration to teach you how to create a practical dry and wet partition design!

<> small apartment bathroom is generally only about 3 square meters, if you want to achieve indoor dry and wet separation, you must make reasonable use of the bathroom space and layout, but also consider the direction of the bathroom door opening. For this kind of small square bathroom, it is good to use a glass shower room partition of 1 4 arcs to make dry and wet partitions, with good results and safety. The downside is that it takes up a bit of bathroom space.

<> the bathing room with the sliding tempered glass door, it takes a long time, and in a humid environment, it is easy to cause the track to be unsmooth. Therefore, this casement bathroom design is very good for the dry and wet partitions of the bathroom in small apartments. And the shape of the straight line is more aesthetic with the bathroom cabinet.

The disadvantage is that the tightness is not as good as that of the track.

<> In addition to using tempered glass bath room for bathroom dry and wet partition partition design, shower curtain for small bathroom is the most economical and practical way. It occupies less space and can be disassembled at any time, which is inexpensive. When decorating, pay attention to the style of the shower curtain and the matching of the bathroom decoration style, which can have a better effect.

The design of the shower curtain can also be made into a semicircle, using the corner of the bathroom in a small apartment. Usually there are two large wrapped water pipes in the bathroom, which are placed in the shower area, which just has little impact, leaving the extra space for the toilet and bathroom cabinet. The disadvantage of the shower curtain is that it affects the line of sight, and it should be dried in time after taking a bath.

<> use tempered glass partitions to design dry and wet partitions in the bathroom, which has a stronger sense of transparency, and does a good job in waterproof design and storage design. If it is paired with a perfect lighting design, the effect is even more beautiful.

If you want the bathing area to be more comfortable, you can reduce the size of the wash basin appropriately. Some people do away with the toilet and install a squat toilet in the shower area, which is also a good way to design dry and wet partitions for small bathrooms. The premise is that you can accept squatting on the toilet.

When it comes to storage, of course, small bathrooms should pay more attention to this, but fortunately, there are now storage tools and components, like the bathroom design in the picture, does it look neat and tidy.

<> if the bathroom is small and there is room for space outside, the washing area is placed outside the bathroom, and the design of this dry and wet partition is the best to achieve true partition separation. Generally, you need a wall remodeling or custom bathroom cabinet, and both sides to the wall are the best.

Isn't it very beautiful and practical to have a master bedroom bathroom like this, which is also designed with dry and wet partitions? The above is a carefully selected 15 small bathroom dry and wet separation design, I hope to help you! What are your thoughts on the design of dry and wet partitions, welcome to leave a message.

Separate the washing area. Due to the high frequency of use of the washing area, the washing area can be separated from the toilet by changing the position of the partition wall, so that the congestion of the toilet can be reduced, and the dry and wet separation needs of the toilet can be realized.

Detach the shower area. In the case that the washing area cannot be separated separately, the shower area can be separated through the shower room to achieve the effect of dry and wet separation.

It should be noted here that the shower room is relatively square and occupies a certain position, which can be installed at the turn of the bathroom to save a certain amount of space.

I think you can put a slider on the wall and hang a shower curtain, which not only takes up less space, but also separates dry and wet.

The main thing is to make a rough distinction between the washbasin toilet and the shower area, and set the washbasin outside the bathroom, which not only does not add a bathroom, but also makes the space of the bathroom larger.

First of all, the space of the bathroom should be divided, and the shower area, laundry area and washing area should be isolated, so that dry and wet can be separated.

The bathroom is the most common place used by every household, and it is also a place that every family can't live without. In order to create the effect of dry and wet separation, there are several ways to create a small apartment: the first method is to create a separate bathroom, the second method is to create a semi-open bathroom, and the third method is to create a solid wall bathroom.

According to different toilet usage and different preferences, you can choose the method that suits you.

1. The independent toilet can meet the needs of bathing and brushing teeth at the same time

A freestanding bathroom is a separate space. That is, make the bathroom a separate bathroom, and then install things like a sink outside of the bathroom. This method is often used by designers in home decoration design in modern home design, and now many families are using this decoration method.

Whether it is a small apartment or a large apartment, this method greatly facilitates everyone's needs for the separation of dry and wet in the bathroom. It not only satisfies the use of brushing and washing your face outside, but also makes it convenient for everyone to take a bath in the bathroom, both things can be done at the same time, and you don't have to worry about the space outside the shower area being wet. <>

2. Semi-open can be divided into areas for dry and wet separation with partitions

Semi-open toilets are also suitable for small apartments, because the space is limited, so in order to effectively save space, glass partitions or curtain partitions can be used to achieve the use of dry and wet separation. This saves space to a great extent. The space of the bathroom will also be brighter, and the bathroom can also meet different needs under the effect of partitions.

3. Solid wall decoration can also meet the separation of dry and wet, but the space will be smaller

The solid wall bathroom uses a wall to partition the toilet to achieve the effect of dry and wet separation. The result is a bathroom that is more private and soundproof. However, this method is not commonly used in small apartments, because it will bring a larger area of reduced space.

The simplest way to separate dry and wet in a small bathroom is to hang a shower curtain and install waterproof strips on the ground, but this method is not beautiful.

Design the shower room, you can also install a shower curtain, you can also do glass partitions, do these at the same time, but also remember to make a waterproof platform, to run away with waterproof, flow to the dry area, you can also install a bathtub, you can also install the sink outside the bathroom, this is a good way to do but partition.

In addition, to install a shower room, you can buy a small size, you can also install a shower curtain, or use glass as a partition; On the track of the shower curtain, it is possible to hang a shower curtain, and it is better to design a water retaining table, which can also be treated by using the toilet and shower area as a wet area.

Determine the location of the dry and wet separation area in the bathroom, and then carry out the construction; Put a glass partition in one corner of the bathroom, leave a proper position, be sure to fix it, and then set up a shower and bath bomb inside.

You can make a glass partition in the middle, so that you can separate dry and wet, and you can also put a cabinet in the middle, which can not only place items, but also make a partition, and save space.

In addition, you can buy a small size shower room, or you may be equipped with a shower curtain, or use glass to fulfill the partition; On the track of the shower curtain, you can hang the shower curtain and it is better to imagine a water retaining table, or you may use the toilet and shower area as a wet area to fulfill the disposal penalty.

The best wet and dry partition design is a three-stage design, but it is common to request that the bathroom area is large enough. Compared with the classic dry and wet partition design, the washbasin is placed outside the bathroom, and the toilet and shower area are together, so that a small area of the toilet like 3 4 square meters can be designed in this way. Moreover, the decoration style of the washroom area can adhere to the difference with the living room, which is more beautiful and beautiful.

If you want to place the washing area outside the bathroom in a slightly smaller bathroom, you can use the glass sliding door to save the space on the wall. Don't think that a 20 cm wide wall is nothing, put it in a bathroom of a few square meters, the sense of space can be much larger, making people feel more warm. The glass sliding door is framed with aluminum alloy, which is moisture-proof and has better stability.

Bathroom cabinets and bath mirrors provide plenty of storage space. The shower area inside can also be designed with dry and wet partitions, so that it can achieve three-stage separation. In addition, as shown in the picture, the air of the toilet is higher than the shower area, and the water retaining strip and shower curtain can be used to deal with the problem of water flow very satisfactorily.

Pay attention to the angle of inclination in the air in the bathing area, and the water flow can be quickly discharged through the floor drain to ensure the dryness and cleanliness of the bathroom.

If the outside of the bathroom is not convenient as a dry area of the wash basin, it can also be designed in this way, the wash basin is built with half a wall, insisting on the transparency of the bathroom, and can be separated from the wet area. Although the space is not large, the wall-mounted bathroom cabinet design is used to eliminate the sanitary dead corners, which is as clean and warm! If you are worried that the shower curtain is not tight enough to block the water, or you prefer a boring bathroom environment, and the wash basin can only be placed in the bathroom, many people use tempered glass sliding doors to separate the toilet from the shower.

It's a good idea to put an absorbent mat at the shower door so that you don't get shoe prints or water stains all over the place when you come out of the shower.

The bathroom design with tempered glass sliding door isolation has achieved dry and wet partitions, but in a small bathroom, the washbasin and toilet are planned together, which usually looks cramped and panicked. At this time, it is possible to adopt a wall-mounted design, including a toilet and a bathroom cabinet, and pay attention to the size of the two bathroom products. The wall-mounted design is beautiful and adaptable, with no hygienic dead spots.

The design of the alcove can also be like this, the ordinary bathroom will have two large drainage pipes that need to be wrapped, and the wall should be extended in this position, and the glass can be used as a shelf to make a more beautiful alcove storage design. Reasonable design of bath doors and shower curtains is the fundamental requirement for the division of dry and wet areas.

Dry and wet separation design can be very good to improve the home life experience, even if it is a small bathroom, after reasonable planning and design, it can also have dry and wet partitions!

If the bathroom area is small, the washbasin and toilet can be designed horizontally, so that the toilet will occupy a smaller area, and it can be placed horizontally, so that it looks more hidden, and the shower room can be designed next to the window, and the passing effect is better.

Small houses can also do a good job of dry and wet separation, you can use curtains, glass, or partitions, bricks, or screens, all of which can be done dry and wet separation.

You can install a shower curtain in the bathroom, which can also serve as a dry cleaning separation.

We can design a corner vanity, in the corner area, we can make full use of the corner area, increase the area of skin care. One side of the corner can be used for washing, and the other side can be used for bathing, so that simple wet and dry separation can be achieved.

How can the bathroom of a small apartment be separated from dry and wet?

In addition to the above practice, we can also install a partition so that a diamond-shaped shower can be formed. It can also systematically create a shower room to make the shower space look more classy, and it can also achieve dry and wet separation. After such a design, we can also separate dry and wet in a limited area, and we can also improve the happiness of each householder!

To separate wet and dry, you can place a bathtub near the window

Put a bathtub near the window, and then make a glass partition from above, so that the water does not flow out when you take a bath, and you can easily separate dry and wet. In fact, many people think that a small bathroom is not suitable for a bathtub, in fact, such an idea is very wrong. With a bathtub, it relaxes people and relieves stress, and with the addition of such a design, your bathroom can be easily separated from wet and dry, no matter how small.

If you want to increase the area of dry and wet separation, you can also make a suspended sink

In a small area of the bathroom, we can lift the higher area and turn this place into a suspended sink, so that the effect of dry and wet separation can be realized, and the whole space can also look more dry and neat, and in the process of moving in, it can also greatly improve the happiness of everyone's home life.

If we want to increase the use of space, we can also create a row of closets above the sink, so that we can put unused things in the closet, which can increase our toilet area. After understanding these methods, which design do you like best?