When there is no suspended ceiling on the ceiling, how should the circuit be modified appropriately?

If there is no ceiling on the roof of the house, then the circuit renovation work of the house must be treated with caution, and the circuit can be completely moved to both sides of the wall, but it should be noted that the steel bars in the wall should not be damaged in the process of slotting, and the circuit can be embedded after the slotting is completed, and then repaired with fine stone concrete.

For the crown, there is no ceiling is indeed a very difficult thing for the circuit setting, and when the house does not have a ceiling, then the circuit is impossible to conceal it, if you want to use some slotting methods, it will inevitably affect the residents upstairs, and it will also affect the thickness of the floor, so in the case of no ceiling, the circuit must go on both sides of the wall, because only in this way can we protect the safety of the house structure, and at the same time, the circuit can be transformed more beautifully. The most important thing is that it can be more convenient to repair after the circuit has problems in the later stage. <>

The roof without suspended ceiling circuit renovation should go on both sides of the wall

When the ceiling does not have a ceiling, then there will be a lot of trouble when the circuit is set, because there is no ceiling, then the circuit can not carry out an effective concealment, so to carry out circuit transformation, it is necessary to go on both sides of the wall, some are shear walls on both sides of the wall, and some are masonry walls, so at this time, the owner friends can dig the wall after determining that it is a masonry wall, and at the same time play a series of trunking and then bury the line in it, and finally fill it with fine stone concrete. <>

Summary

In general, circuit transformation is a very important process, if the circuit transformation is not changed well, it is likely to lead to a short circuit in the later stage, which is a great challenge for the safety of the house, so do not connect the wires when transforming the circuit, and at the same time, if there is a joint position, it must be strengthened against. It is worth noting that if the circuit is transformed, the open trunking is relatively deep and wide. At this time, the owner can buy a conduit to protect the line, and I can effectively extend the service life of the wire.

The roof can be modified, and the roof can also be added by gypsum board, so that the circuit can be transformed, so that the wires will not be exposed.

If there is no ceiling for the ceiling, you can bury the thread in the grass, use a fixed card line, and then brush it with plaster or putty, and you can solve the problem you want to solve

The relationship between the circuit and the ceiling is not too big, the key is that the water pipe should go to the top, and the water pipe can be hidden directly when you go to the top.

When renovating a new house, circuit renovation is very important. It's about security, if that ceiling doesn't have a ceiling. How to transform the circuit, Beijing Longfeng Ma vlog will take you to find out.

There is little relationship between the circuit and the ceiling. The core is the water pipe. It's better to walk at the top.

The ceiling can hide the water pipes. But circuits are usually walked on the ground or on walls. The lights on the roof can serve as the developer's original route, the position can be moved slightly as needed, preferably with small recesses open at the top.

In the later stage, it is not a big problem to stick the mesh cloth.

Confirm the CCC certification mark and check the CCC certification mark of the wire when selecting a wire. Therefore, cables and wires are national compulsory safety certification products, and only the "CCC" certification certified by the China Electrical Product Certification Board can be considered qualified and safe. The appearance of the wire, pay attention to the shape of the wire when choosing the wire.

Usually, the surface of the wire product is smooth and flat, and the color is evenly distributed. Therefore, people have to disassemble the wire when they buy it, and if there is a change of color, etc., this kind of wire is not qualified.

There is a method of not tying the roof, which is to bury the wire through the beams of the house. Lay grooves along the girder of the house, and the position of the laying line is best to choose the inner side of the girder, which is convenient for construction and more beautiful. It is a wire that is placed in a merchant ship slot in the corner of the wall, and the wire can be inserted directly into the slot.

The thread is walked on the ground, and grooves are laid in the corners of the wall to bury the threads. What kind of pipe is used to decorate the buried wire, the casing in the parent is generally mainly made of plastic materials, mainly PVC pipes, PET, which are very good pipes and have good leakage protection performance.

Metal pipes are also commonly used indoors, and are generally used for wires and cables. Both strong and weak wires can be used, which has a good protective effect. In addition, the pipe is corrosion-resistant, high-temperature resistant, wear-resistant, and has good sugar resistance and practicability.

Ceramic pipes are less used on wires and are made of ceramic materials, due to the material relationship, ceramic pipes have good insulation and corrosion, and are not easy to age, but they are materials with high material cost and brittleness, which are easy to be smashed by heavy objects.

If you are in the living room, it is better to take the ground line, and if it is a renovated house, you can only take the bright line.

Such circuit transformation must find a professional electrician to carry out the transformation, so as to better ensure the normal life in the future. It can also avoid some surprises.

Because there is no ceiling, it is best to find some circuit maintenance personnel for transformation when the circuit is transformed, so that it is not easy to be electrocuted, and it can also be better to plant crops.

If there is no ceiling, the circuit should still choose the internal transformation when the circuit is transformed, if you choose the external transformation, there may be a situation of connecting electricity, which is easy to be electrocuted at this time, and you should choose some wires with better waterproof performance when the circuit is transformed.

Introduction: There are some places that are particularly important when decorating the house, and it is considered that the transformation of the circuit is actually particularly important, because if the transformation is not good, it will affect the future life and safety. But if there is no ceiling on the ceiling, how should the circuit be modified?

Today, I'm going to talk to you about how to transform. <>

Many people think that there is no ceiling on the ceiling, and it will be very troublesome to transform the circuit, but in fact, it is not so troublesome, because the circuit has little relationship with the ceiling. The most critical is the problem of water pipes, every household to be decorated will have water pipes, but the water pipes are best to go to the ceiling, because only in this way can the ceiling be hidden to the blood vessels at home, which is also the best way, if the circuit is low or strong, the lights on the roof are used to provide the line position provided by the developer is also slightly moved, and its argument is very influential at this time. <>

If there is no ceiling for the ceiling, the circuit transformation can save some national standard sheath wires, and the key dates can be simple enough to open, you can bury the lines into the grass, use a fixed card line, and then brush with plaster or putty, you can solve the problem you want to solve, even if there is no ceiling at home. I also want to tell you that the ceiling cannot be installed at will, and it must be decided according to the actual situation of the whole home. The circuit can not go, and the ceiling can be carried out from somewhere else.

It can be seen that in fact, many people will have a ceiling in their homes, and it is precisely because of this that some people have questions about whether the ceiling is good or not, and some people will feel that it is very depressing and inconvenient to make the ceiling, in fact, I want to tell you that if you can install a ceiling, it is best to install a ceiling, because it also has a great effect, and can play a decorative or hidden effect. Give the whole house a perfect show.

There is no ceiling of the slender mountain, the circuit in the transformation should still choose the interior for transformation, at this time it is necessary to let the sail posture circuit state along the wall and some corners of the connection, choose the way of series connection will not appear leakage.

When there is no suspended ceiling on the ceiling, it is best to choose to carry out the circuit modification from both walls, because it is relatively safe.

It can be made in the wall, or it can be made in a punk style, wrapped directly with pipes, and this decoration is very industrial style.

First of all, the circuit has little to do with the ceiling, the key is the water pipe, it is best to go to the top, the ceiling can hide the water pipe. However, circuits are generally off the ground or wall. The lights on the roof can be used with the developer's original line, and the position can be moved slightly as needed, and a small groove can be opened on the top.

There is no ceiling on the ceiling, and the transformation of the circuit can use square meters of national standard sheath line, directly open a 1cm slot, bury the line in the slot and use a fixed line card, and then fill it with quick-adhesive powder or use gypsum to fill it and scrape putty. There is also a yellow wax hose that can be worn, and it is good to open a one-centimeter slot, and everything else is the same.

Wall slotting, threading, tube release, slotting.