There is still a certain thickness when the wall is brushed, how thick is the putty generally approp

In the choice of wall paint, I am still relatively restrained. The bedroom only brushed the bedside surface, because of the layout restrictions, the bedside is facing the wardrobe, and I feel that the feeling of brushing one side is simpler and more prominent. There is still more than half a bucket left in the light gray, and the study may be completely plastered.

Nowadays, many young people like the IKEA style, the walls are painted with the colors we like, there is not too much modeling, there is not too much decoration, just like the life pursued by the post-90s, simple and simple.

First of all, the wall can be painted with latex paint, wallpaper, stone and other decoration methods. It depends on which one you prefer. Plan accordingly in conjunction with your budget.

Painting is relatively the cheapest, followed by wallpaper, and finally stone or slab. After all, as soon as you enter the bedroom, the background wall should be the most significant place to highlight the decoration characteristics of the room, of course, you should put more thought into it, and other places can choose to brush or not according to your own economic situation.

Nowadays, many young people like the IKEA style, the walls are painted with the colors we like, there is not too much modeling, there is not too much decoration, just like the life pursued by the post-90s, simple and simple. After all, as soon as you enter the bedroom, the background wall should be the most significant place to highlight the decoration characteristics of the room, of course, you should put more thought into it, and other places can choose to brush or not according to your own economic situation.

The decoration of the surface layer mainly includes our regular latex paint or wallpaper, etc. In addition, for some wall tiles, there is no need to scrape putty at this time, and the tiles are directly pasted on the surface of the plastering layer. After cleaning up, wipe off the dust on the wall with a cloth, paint the latex paint with a row ratio, use a new row ratio, clean up the floating hair and cloth on the row pen, and clean up the firm hair of the latex paint before use, and add some water to properly prevent the head from changing, and the paint brush can not be opened.

Generally, it needs to be grasped at about three centimeters, so that the interior of the room will not be too dark, and such putty is not easy to fall.

Scraping putty is generally more suitable after one centimeter to centimeter, because this thickness will not appear particularly heavy, and it is relatively flat.

Generally, it is more suitable for about one centimeter, so that the effect looks the best and the durability is the highest.

It is mainly determined according to the flatness of the wall, most of which are not more than two centimeters, and if it is exceeded, it is easy to crack.

Do the math how much it will cost you to renovate your home

There is still a certain thickness when the wall is painted, not too thick, not too thin, it is best to do it according to the specifications, and the effect is too thick to make it is not good-looking, and it is a waste of money. The flatness of the wall is more than 5mm, in order to make it more convenient to level, it is recommended to use thick leveling material to do thick leveling first. Thick leveling materials are generally scraped 1 time, try not to be too thick, in order to be able to level.

Note: It is recommended that a single batch scraping should not exceed 2cm, and there may be problems such as cracking. If the screed thickness is more than 2cm, it is recommended to complete it by multiple batch scraping.

When the flatness of the wall is less than 5mm, it can be leveled with fine leveling materials. Fine leveling materials can generally be scraped 2-3 times, and should be as uniform and smooth as possible. In order to obtain a better performance effect when painting, the fine leveling material is generally polished with fine sandpaper after batch scraping, so that the wall is more flat and smooth.

If you don't plan to paint, then you don't need to polish Description: After the water-resistant putty is fully strengthened, it will become extremely solid (5-7 days), and it will become extremely difficult to polish it again. Therefore, it is recommended to start putty sanding 1-2 days after the last pass of material is applied to the wall.

When sanding, use a light bulb of more than 200 watts close to the wall to illuminate, and check the flatness while sanding to get a better effect. When scraping putty, it must be dried in the sanding, you must know that the paint must be brushed more than 2 times to achieve a better effect, remember that its flatness can not exceed 5mm.

Enter the area and get the decoration for free**].

Enter the area and get the decoration for free**].

LZ you say the opposite, putty paste is scraped thick will crack off the wall, this kind of problem you use 303 kind of good putty paste is useless, the moisture in this putty is very high, almost 25%, you scrape the putty to dry for two or three days, if the scrape is thick, the moisture is gone in the drying process, it will definitely shrink, the scrape is thick, the water loss is more, the shrinkage is greater, so the putty scrape is thick before the putty layer cracks. Generally speaking, the putty scraping should be about 1 mm, too thin is not good, too thin the water dries quickly, it will fall off the powder, so in fact, the binder in the putty paste can not be filmed and bonded, so this thing must have an appropriate thickness, not the thicker the better.

The one-time scraping thickness of putty is directly proportional to the dry shrinkage strength, and the increase of dry shrinkage strength is directly proportional to the cracking tendency of putty. As the thickness of putty increases, the dry shrinkage strength increases, and the cracking tendency increases. If the screed amount is too thick, it should be scraped in layers, so that the thickness of the first batch scraping can be reduced (it is recommended to scrape the thickness at one time, so as to reduce the curing dry shrinkage strength and avoid the cracking of putty.)

Putty powder is a kind of building decoration material, and the main components are talcum powder and glue. A layer of white on the surface of the newly purchased rough house - putty, usually the whiteness of putty is above 90 and the fineness is above 330. Putty is a substrate used for wall repair and leveling, which lays a good foundation for the next step of decoration (painting and wallpaper).

Putty is divided into two types: interior wall and exterior wall, and the exterior wall putty should resist wind and sun, so it has high gelatinity, high strength, and slightly lower environmental protection index. The comprehensive index of interior wall putty is good, healthy and environmentally friendly, so the interior wall is not used externally, and the exterior wall is not used internally. Usually putty is gypsum or cement-based, so that the surface is rough and it is easier to bond firmly.

However, during construction, it is still necessary to apply a layer of interface agent on the base layer to seal the base layer and improve the adhesion of the wall, so that the putty can be better bonded to the base surface.

Putty is generally composed of base material, filler, water and additives.

The binder, also known as the binder, is the most critical component of putty, mainly playing various roles such as bonding. The most commonly used binders for putty are cement and organic polymers, which are divided into emulsions and latex powders. Cement is a binder with good cohesiveness, durability and reasonable cost performance, but it has poor tensile strength and crack resistance.

Organic polymers can be modified and toughened to improve putty performance.

Fillers mainly play a filling role, and commonly used are calcium carbonate, talcum powder and quartz sand. Attention should be paid to the combination of packing fineness.

Additives include thickeners, water retention agents, etc. Thickeners and water-retaining agents play the role of water retention, improve storage and construction performance, and cellulose is generally used. Antifreeze is mainly used to improve the storage stability of putty at low temperature, and slip agents and water reducers are generally used in high-grade putty to improve the construction performance of putty.

Some also add fibers to resist cracking.

If it is a thick batch leveling, you can use a thick bottom putty, and the thickness of the putty can be determined according to the flatness of the wall, but the thickness of each layer is less than 10mm, and the total thickness of the batch is not more than 30mm;

If the surface layer is finely leveled, you can use cement-based water-resistant putty for thin batches, generally scraping 2 batches, the thickness of each batch scraping is less than, the total batch scraping thickness of the putty layer is not more than 3mm, (the interval between the first and second batch scraping should not exceed three days), and the thickness of the putty layer is not less than 1mm.

Summary. Good evening, glad to answer for you. The putty of home decoration is not the thicker the scrape, the better, and the scrape is too thin, but it is not thick or thin.

The putty is scraped too thickly, and it can't bear strength between each layer, and the bite is not tight, and it is easy to fall off. Moderation is the best, and the putty is generally scraped 3 times, and moderation should be emphasized. In addition, you have to wait for two or three days every time you scrape the putty, it is too thick, and once the inside is dry, the moisture will be gone, and it will crack.

It is too thin, and the moisture in it loses quickly, and it is easy to lose powder. The putty should be about one millimeter, which is the best.

Home improvement putty scraping process: It is better to scrape the putty thickly, or thinly.

Good evening, glad to answer for you. The putty of home decoration is not the thicker the scrape, the better, and the scrape is too thin, but it is not thick or thin. If the putty is scraped too thickly, it will not be able to bear between each layer, and it will not be tight, and it will easily fall off.

Moderation is the best, and the putty is generally scraped 3 times, and moderation should be emphasized. In addition, every time the putty is scraped, you have to wait for two or three days, it is too thick, and once the inside is dry, the moisture will be gone, and it will crack. If the limb is too thin, the moisture in it will be lost quickly, and it is easy to lose powder.

The putty should be about one millimeter, which is the best.

The putty is generally scraped three times, the first time it is scraped a little thicker, which is conducive to effective contact with the wall, the second time it is thin and the finger is imitated a little, and the third time it is also thin and the source is teased a little, and then polished, as long as the hail is removed and leveled.

The flatness of the wall is more than 5mm, in order to make it more convenient to level, it is recommended to use thick leveling materials to do thick leveling, and thick leveling materials are generally scraped 1 time, try not to be too thick, and be able to level.

If there is a problem, use putty to repair and level the collapsed part, and after the putty is dry, polish, smooth and sweep with sandpaper.

Scrape the big white putty twice, and then scrape the second time after the first putty is dry, which is generally required to survive at least twice, and the surface is required to be not only smooth but also uniform in texture, otherwise it is easy to have inconsistent color shades, which affects the decoration effect.

The thickness of the paint is very small, it can only be measured with silk, it can only be about millimeters, how thick is the putty, this question is not easy to answer, it depends on the flatness of your wall. Scratched thick, easy to crack. It is better to have a flat wall.

The wall decoration batch putty is mainly for leveling the wall, which seems simple but actually has a university question. We all know that it is difficult to meet the construction specifications in one batch scraping, so it is best to do it several times. Then the question is, how many times should the putty be scraped for decoration?

Is it just 2 times? Or 3 times best? Too many people think wrong, no wonder they lose their powder after half a year of staying!

Putty is a thick slurry base material, which is mainly used to smooth the surface of the wall and remove the defects of uneven wall. Only if the putty is well scraped in the early stage, the wall decoration materials will be more beautiful in the later stage. As a necessary process for wall decoration, it is best to scrape putty 3 times is the safest!

The first putty: because the cement wall is too rough and the surface is pitted, the first time is mainly to rough flat and base the wall. Compared with simply using putty as a base, adding some gypsum powder to the putty is easier to increase the hardness of the putty, which can not only cover up the flaws on the wall, but also dry faster.

Especially in humid environments, the advantages are even better.

The second putty: also known as fine leveling, as a key leveling process, it needs to be carried out after the first putty is completely dry. It is also used to adjust the flatness and straightness of the wall itself.

The yin and yang corners must be strictly corrected to ensure that the scale is accurate. After the putty is dry, a rough sanding of the wall is required.

Third putty: After the second putty, it is left to dry for about 3 days, and then the third putty construction is carried out. However, this time it is necessary to focus on local leveling, and finally carry out a fine grinding after the construction is completed. You can also use a flashlight to modify and fill small holes in time.

In fact, if it is a master with good craftsmanship, it will be done twice, and if it is an apprentice, it will be done three times. And whether it is scraped twice or three times, the quality of the putty is the most important. The quality of the putty bought by many decoration teams is not good, and the wall is not good if it is leveled, but I am afraid that three times is not enough.

Before decoration, regardless of the worker's craftsmanship, the selection of putty must be strictly controlled.

When the house is being renovated, when the wall is being decorated, when scraping putty, I don't know how thick it needs to be, and what are the methods when dealing with it, so let's take a look.

1.How thick should the wall scrape putty If the flatness of the wall is less than 5 mm, check the flatness during the grinding process. Fine planarized materials are usually scratched 2-3 times.

When crushing, place the bulb above 200 watts near the wall light. It is a good idea to start putty grinding 1-2 days after applying the last material to the wall. The thick screed material can be scraped once in batches, making it more convenient to level.

As a result, the flatness of the wall surface is more than 5mm.

2.How thick does the wall scrape putty go on to go on to say that polishing becomes very difficult at this point: after the waterproof putty is completely hardened (5-7 days), it becomes stronger and gives better results.

Illustrate. If you don't plan to paint, you should try to smooth out, have problems with cracks, and make the walls smoother. Get better performance and smoothness when painting.

If the normal thickness is 2cm, it is recommended to use thicker materials to make thick horizontal specifications, and horizontal repeated placement can do accurate leveling materials It is recommended to blow the finished product, try to make the horizontal success, try not to be too thick, it does not need gloss.

1.When handling putty, remove dust and remove any visible areas. If there are dents, place the mortar horizontally. How thick the putty scraping on the wall of Pengchang is, the flatness and verticality of the yin and yang angles must meet the requirements, and the surface of the floor is flat compared to the wooden rafters.

2.Before applying putty, if the oil on the wall is heavy, wash it with laundry detergent or 10% alkaline water and wash it with water. If it is a regular oil, it can be sanded. If the mortar wall is dry to 70%, it can be used directly. If dry, it should be moistened with water.

3.In order to prevent excessive water loss, gypsum powder tiger appears chalking; (3) Water-soluble resin backsheet 107 template: 2 or 1: If the wall is picked up by a quick suction chain cavity, 1 must be used.

4.If the bottom of the wall is made of mixed mortar, white mortar, or cement mortar, wait until the floor is 70% dry. After scraping the thickness of the wall putty to cover the gypsum plaster, it must be wiped once in the calendering and leveling process, and the thickness of the second pass is 2mm.

Drywall walls or walls can be scratched, need to be scratched twice, and the thickness is up to 1 mm.

Through the above article, I don't know how thick the wall needs to be when scraping putty.

You can get it for free