Is the paving tile a strong sense of beauty or not?

First, the floor tiles are better or not.

1.First of all, perfect joints and aesthetically pleasing grout can make tiles more useful. After solidification, the surface is lubricated like porcelain, which has the advantages of high strength and wear resistance.

And it does not stick to stains, the tile joints themselves have good self-cleaning, easy to clean and wipe clean, and it is not easy to hide stains after scrubbing with tiles, which can avoid mold caused by cracks. The beautiful joints are waterproof, moisture-proof, and impermeable, and the gaps in the tiles will never be blackened.

2.Tile grout has a decorative effect, and the new tile grout is composed of high-tech new polymer materials, advanced materials and special additives. Unlike white cement, colored caulk and dry powder cement materials are made up of low-grade pigments, so most tile joints are smooth.

If different tile grouts are paired with different tiles, your home can become more three-dimensional.

3.Sewing agents are more suitable for kitchens and halls. In some markets, tile materials tend to be much better than ordinary colored sealing materials.

Real porcelain glue works well in the kitchen and bathroom, because the kitchen and bathroom are damp and have a lot of oil stains. If you don't want beautiful sewing, the walls and floors will turn yellow after a long time, and the deeper the immersion in oil, the darker they will become, which will seriously affect the beauty of the house and produce a large number of bacteria that affect human health.

Second, the four major construction processes of ceramic tile joints.

1.First of all, it is necessary to prepare sewing agent, silicone rubber gun, fine-grained paper, and building materials and tools such as brushes, first clean the surface of the tile, then treat the gaps of the tile, and then use the American sewing cone to dig out the gaps of the tiles at a depth of about 2 mm to ensure that the sewing agent has enough adhesive area, if the groove is too shallow, it is easy to fall off the sewing agent after fixing.

2.Open the sewing agent first, then load the scrap on the glue gun and extrude it, then put it on the rubber nozzle, and then make the corresponding size cut on the upper part of the rubber nozzle according to the size of the filling gap, and then paste the grain paper at the construction site, and then squeeze the sewing agent into the seam, but pay attention to the size of the control, wait for the air to dry, and then use a knife to clean up the remaining sewing agent.

The beauty of the floor tiles, the overall feeling is still very good. The two floor tiles are well combined.

Bricks should leave a certain gap, for fear of heat expansion and cold contraction in the future, the beautiful seams look neater, because the gaps of the beautiful seams should be left wider. The beautiful sewing looks more beautiful, but it costs more than 2,000 to ask others to do the materials and labor for a house.

If it is not beautiful, it is simpler, and if it is not beautiful, it is caulk caulking. It depends on personal hobbies and financial situation.

There are two ways to lay floor tiles, one is without gaps and the other is with gaps. Of course, there is no need for beautiful seams, but the area is too large and easy to deform and swell, as shown in the following figure:

It is best to increase the beauty of the seam of the floor tiles, generally not the beauty of the seam bricks, the two bricks will be seamlessly connected, but the seamless docking of the floor tiles in the thermal expansion and contraction of the action, it is easy to arch and crack hollow, if there is a joint brick but not beautiful seams, then the brick joints will hide dirt and dirt. The floor tile joints are not only beautiful, easy to clean, but also ensure the expansion and contraction of the floor tiles in the case of thermal expansion and cold contraction.

It is best to decorate the house and pave the floor tiles to increase the beauty sewing process. 1.The floor looks neat and beautiful.

2.It is very necessary for the floor and wall of the bathroom and kitchen, the floor plays a waterproof role, and the wall plays a moisture-proof role. 3.

The sewing agent plays the elastic function of thermal expansion and cold contraction, and the space between the floor tiles and the floor tile is reserved before the sewing is large, which prevents the squeezing of the floor tiles by thermal expansion and cold contraction.

Beautiful sewing is required! I need Meifeng so much! First of all, you must know that beauty is not simply the role of beauty!

Its main function is mildew-proof, dust-proof or something, let's be specific! If there is no beautiful seam, the floor tiles are made of general caulk, and they will fall off after half a year, and they will turn black every day, which is particularly unsightly! The beauty seam can not only choose the color that matches the tile, but also waterproof, mildew-proof and moisture-proof, no matter how I mop the floor and wash the floor, at least the seam on the ground is very clean, and there will be no black sinking soil or small insects and the like!

Anyway, it's good! Think for yourself......

It doesn't make a difference, it's just good-looking.

The floor tiles are beautifully sewn.

Joints and grout can make the tile more effective, and the surface is lubricated like porcelain after solidification, which has the advantages of high strength and wear resistance. And it is not sticky stains, the tile seam itself has better self-cleaning, easy to clean and easy to wipe clean, and it is not easy to hide the stain after being scrubbed with the tile, so as to avoid mold in the cracks. The beauty seam has the effect of waterproof and moisture-proof, and anti-penetration characteristics, so that the tile gap will never be black.

Tile caulk also has a decorative effect, and the new caulk is made of high-tech new polymer materials plus advanced materials and special additives, different white cement, color caulk dry powder cement material is composed of low-grade pigments, so most of the tile caulk surface is relatively smooth, if different tile caulk with different tiles, it can also make the home more three-dimensional.

Precautions for floor tile joints.

Powdered things instead of caulk primer: You can't use powdered things instead of caulk to make a primer, after the caulk is inserted, powdery dust such as cement powder will be wrapped around the caulk, resulting in the inability to bond with the gap, so be sure to keep the gap clean.

Antique bricks do not stick masking paper: masking paper as a beauty seam construction tool, with or not depends on the choice of tiles, if the home is antique bricks or waxed floor tiles must be used masking paper to assist construction. If it is a different tile, you can choose to use or not to use masking paper according to personal preference.

Is it necessary to make beautiful seams for tiles at home? Is it really good to do beauty sewing? Listen to what the decorator has to say.

Answer: the use of self-adhesive lines needs to be glued, self-adhesive will fall off when cold and hot, can not be used in the position of glass glue or where there is residual glue dust, can not be used in the position of contact with water, can not be used on the glass tile, there is no convenience of gluing during the pasting construction, glue as long as the glue is hit to the corner of the yin can be glued, the glue is not straight can also be adjusted, self-adhesive not only sticky is not straight, and can not be used repeatedly, the joint is also easy to open the glue resulting in a large area of falling off so it is not durable.

An owner's new house has reached the stage of doing tile seams, and some friends say that there is no need to use beauty seams to build, troublesome, many families are not beautiful seams at all, directly choose the right beauty seam self-adhesive lines on a treasure, and paste them on the line!

The owner felt entangled, after the tile is pasted, the beauty of the seam is also a big project, if the self-adhesive line is used instead of the beauty of the seam, is it really reliable?

According to a friend, as long as you buy self-adhesive lines according to the length of your own needs, and then tear off the stickers and stick them directly in the gaps of the tiles, the whole construction period is very short, and it can be completed in less than a day.

In addition, the self-adhesive line can be used on the edge of a built-in gas stove, at the seam between the toilet bowl and the floor, or in the gap between the water retaining strip, and can be used in a wide range of applications.

Originally, the owner heard a friend's introduction and thought that it was enough to use tile sewing stickers, but his designer suggested that he choose a sewing agent. Mainly due to a bug in this self-adhesive line - poor durability.

The self-adhesive line is equivalent to an ordinary sticker, which will fall off when cold or hot;

In addition, the requirements for the pasting environment are also relatively high, as follows:

1. If there is dust on the surface of the paste, it cannot be glued firmly;

2. The wall and floor tiles are often exposed to water, and they are often cleaned, and after a long time, the self-adhesive lines are easy to mold or peel and break.

Therefore, on the whole, if you ask whether the beauty sewing strip is better or the beauty sewing agent is better, the construction time of the beauty sewing agent is long, and it takes a lot of manpower and decoration costs, but it is more durable, and it can avoid the trouble of rework in the later stage.

The floor tiles are beautifully sewn. Advantages of floor tile seams:

1. Reduce the problem of brick joints

Tile grout has good waterproof, moisture-proof, anti-penetration and other properties, which can effectively reduce the problem of tiles turning black and yellow.

2. Easy to clean:

The gaps of traditional tiles are easy to get darker and darker, but the surface of the grout is smooth and does not stain with oil after solidification, which is more time-saving and labor-saving to clean.

3. Enhance aesthetics:

The beauty joint agent is rich in color, as well as matte, bright, metallic and other effects, which can add luster to the tile paving and enhance the beauty of the space.

4. Health and environmental protection

Traditional brick joints are easy to breed bacteria, and the sewing agent is made of epoxy resin material, which is environmentally friendly and healthy, and can effectively prevent mildew when used.

5. Protective tiles:

Although some tiles have strong waterproof performance, but the tile gaps do not have this performance, even if the caulk is used, it can only play a very short role in waterproofing. The caulk is slowly eroded by water, and eventually the water stain will penetrate to the bottom and penetrate into the tile, which will have a certain impact on the life of the tile.

Extended Materials. Precautions for floor tile seams:

1. During the construction process of floor tile joints, a vacuum cleaner can be placed to clean up the dust generated at any time and keep the ground dry. The glue squeezed on the ground is easy for shoes to get on when it doesn't dry out.

2. After making the perfect seam, you need to reserve a good time, generally need to be placed for a day, if it is winter, it takes 1 to 2 days to ensure that the ground is dry.

3. It is recommended to come to the construction after the cleaning stage, so as to avoid the dust impurities brought by the cleaning space and affect the aesthetics of the ground.

In this way, it is easy to accumulate some mold, and secondly, because its color can be chosen in many ways, but at the same time, it will also be worn when it is used, compared to our floor, the wear time will be faster, so it is likely to cause fading and other situations, so that the overall beauty is not as good as at the beginning. Although there are a lot of convenient sewing agents on the market, you can make up for them later, but some people will be troublesome, so whether you want to sew beautifully, I think it still depends on your own ideas, whether you can accept its shortcomings, if you can, then you can consider it.

First of all, I personally think that it is better to leave beautiful seams when laying floor tiles. Tile laying still requires skilled technology, because in the process of paving. There will also be a certain small error between each tile that is paved.

Different situations are different in the tiles and effects, if you do not leave a share, it is also difficult to ensure the quality of the joints of the tiles.

First of all, it can be answered with certainty that the beautiful seams of floor tiles are definitely better than not beautiful seams, and the generation of each new technology is derived from the continuous development of the times.

It is best to leave the seams to pave the tiles, which can effectively reduce the hollowing or warping of the floor tiles. If the gap is not filled, the gap will be filled with all kinds of dust, or some fine particles, which will become more and more ugly after a long time, and it is not easy to clean.

Although the traditional caulk can avoid dust or particles, it is not strong enough, it is easy to crack and fall off after a long time, and it is not resistant to dirt and easy to change color, especially in the bathroom and kitchen, which greatly affects the appearance.

Then, if you choose caulk, first of all, the strength of the sewing agent is very good, and it can't even be scratched off with a blade after it is completely dry; Secondly, the sewing agent can be waterproof and mildew-proof, and it will not change color or blacken for a long time, which will not affect the appearance; In addition, the color of the beauty caulk is more colorful than the caulk, and the selection is more, and the effect will be better through a reasonable match with the tile.

It is best to sew beautifully.

Paving tiles must leave seams. Here's why:

1. There is a delay in the construction of workers.

In tile laying, this requires skilled technology, because it is impossible for workers to completely pave each brick without error in the whole process of paving. In addition, the tiles laid at different times and under different circumstances, the effect will be different, and if there is no seam, it is also difficult to ensure the straightness of the joints of the tiles, thus affecting the consistency of the tile paving.

Second, there is an error in the size of the tile.

The size of the tile is not absolute, although the tile is now mechanized production, but in the process of product production, there will be a certain size error, if there is no seam, it is easy to appear that the joints are uneven when the tile is paved, which affects the beauty of the tile. Recommended reading: Avoid factors that affect the length of the renovation period.

Third, the size of the tile gap specification.

For the gap, there is no unified standard for the size of the gap of the general tile, in addition to meeting the factor of heat expansion and contraction of the tile itself, it also needs to be combined with the decorative effect of tile paving. But in general, you can refer to the following to do.

Fourth, the size of the gap between the wall tiles.

The size of the wall tiles should generally be around the size, not less than 1mm, and the air nails or packaging bags can be used as references. Special effects can also widen the gap, such as 5mm, etc. Like some antique bricks or exterior wall tiles, balcony strip bricks are better to leave wide joints.