-
Precautions for beautiful seams, before doing beautiful seams, clean up all the gaps, use a vacuum cleaner to suck up the cement and sand dust in the gaps, and then wipe the surface of the tiles and the edge of the gaps with a rag.
-
The best time for the construction of ceramic tile joints at home is best to choose after these dust-prone processes. Furthermore, it should be noted that the tile sewing process of the kitchen and bathroom at home is different from that of the living room and bedroom. If you want to sew the kitchen and bathroom at home, first do the sewing and install the ceiling and cabinets.
This is because the kitchen and bathroom walls and floors will be tiled, and the ceiling will be suspended after the tiles in these two places, and the ceiling will press part of the wall tiles. In addition, it should also be noted that the sewing process of the living room and bedroom is to paint latex paint first, paste the wallpaper and install the door, and then do the sewing.
-
You can do it after caulking, or you can do it without caulking, of course, the latter is a waste of materials, the material is really not cheap, because there is a lot of dust in the gaps between the tiles when decorating, so cleaning up this dust is a rather cumbersome thing, you need to be patient. When cleaning, you can also use a brush, brush the gaps, it is best to have a small car vacuum cleaner, that is excellent, small, easy to operate, and the dust is very good. Every crevice has to be cleaned, and you don't need to use too much force when cleaning it, and the bottom of the gap is actually cement, so just clean up the surface dust.
Because the dust in the gap will make the bond not strong and the sewing agent will have impurities, it will not look good.
-
When I used to be in the tile shop, I was specialized in sewing and buying the beauty sewing agent I liked, which can be selected in a cat, **reasonable, and give away tools, and quote the square number, and the customer service can give you the corresponding amount. Cleaning the tile gaps, I think part of the money is the cleaning fee, cleaning up takes up a lot of energy, use a small brush to clean up the cement, mortar, putty powder, dust, etc. left in the tile joints, and then use various tools, awls, shovels, vacuum cleaner rags, etc., to clean the joints. After the previous decoration process, the tile joints can be said to be very difficult to clean.
After waiting for drying, wipe both sides of the tile joint with beautiful sewing wax, and wipe both sides of each seam, especially the antique brick, which is the kind with potholes on the surface of the tile (if the tile is smooth, this step is omitted).
-
Now the beauty sewing can be very popular, and our home was specially made when it was decorated some time ago. There are many precautions for the construction of beautiful sewing, such as sanitary cleaning, temperature, waxing of special tiles, etc., each of which must be paid attention to, so I will focus on the special precautions when an owner does the beautiful sewing by himself, that is, dampness. Clean the ground before doing the beautiful seam, especially the bathroom floor may be washed directly with water, the ground will naturally be very wet, at this time we should pay special attention not to do the beautiful seam, we must wait until the ground is dry before you can do the beautiful seam, otherwise the wet ground will be separated from the beautiful seam soon, in addition, it is not recommended to do the beautiful seam on a rainy day, because in such weather, the air humidity is very large, and the water vapor will be produced when doing the beautiful seam, so the quality of the beautiful seam construction can not be guaranteed.
-
It is best to ask professionals to construct, and the beauty sewing effect is good. Pay attention to yourself, the brick joints should be cleaned and free of dust. The beauty sewing is more tiring, and it is best to cooperate with two people, one glue and one seam.
The construction sequence is from the inside to the outside, first the wall and then the floor. Start in the back room. Generally, it needs to be dried for 24 hours, and the windows should not be opened, and dust is prohibited.
The front wall and floor tiles are cleaned.
-
Preparation before the sewing, since you want to do the sewing construction, if you invite professionals to do the sewing, it is very simple, let the professionals see in advance whether the site meets the requirements of the sewing, and then choose a good sewing color, ready money can wait for the sewing professionals to come to the construction. If you are doing it yourself, then you need to buy sewing materials and professional tools, as well as work clothes and gloves, which are also essential equipment, and then you can carry out it according to the construction process of sewing products.
-
<><The method of tile beauty seaming
1. The first lead first clean the gaps, in the wheel to clean the gaps need to hold the wax rot cleaning knife with both hands, in a straight way to clean out the depth of three to five mm of tile gaps, if the wet wall joints need to be dried and cleaned, use a wet towel to wipe the joints after cleaning.
2. According to the process of ceramic tiles, choose whether to wax or paste masking paper, waxing needs to use a sponge to dip a small amount of wax, evenly spread around the gap of five to ten centimeters, and apply in accordance with the order, the force needs to be even.
3. Then install the mixing nozzle, pay attention to the uniform force, so as not to slip the buckle, and finally install it on the glue gun, open an opening with the same size as the gap, squeeze out the rubber material in front of ten to thirty centimeters, and then glue it at a 45-degree oblique angle.
4. After the glue is finished, use special tools to press the seam, pay attention to the force evenly along one direction, close the edge quickly, and finally 24 hours after the construction, you can use a special shovel blade to clean up the remaining materials after the seam is cured.
-
1.The first point, before the beauty of the seam must be cleaned up in the tile joint, otherwise the grip with the disadvantage of the situation that the beauty of the seam and the ground will be peeled off, there will be impurities, resulting in the beauty of the seam and the ground can not be completely contacted, then it will affect the appearance, the second point, just bought the beauty of the seam, part of the hose is not usable, the front 30 cm or so are used to seal the rubber head, so you need to first beat out the 30 cm of white gel, It is not until the appearance of a normal sewing agent that the sewing can be started.
The third point is that the use of antique bricks must be marked with a layer of wax or pasted on both sides of the gap with masking paper, which is convenient for cleaning up the extra sewing agent, and can also avoid scratching the floor when cleaning the sewing agent with a small knife or shovel.
If you choose the floor tiles of Rongwang tiles, because the water absorption rate of Rongwang tiles is very low, it is only possible to do seamless paving.
-
Heat rises and shrinks. When the temperature and humidity change is too large, it is very easy to cause the thermal expansion and contraction of the ceramic tile and the mixed mortar or tile adhesive used for tiling, resulting in in-situ stress and squeezing each otherIf there is no brick joint or the brick joint is not enough, it will cause the middle of the tile to be extruded off, cracked, peeling and other conditions. Tile specifications are inconsistent.
Normally, no matter what level and size of the tile, there has been some gap in the specification, and the gap between the bricks and the bricks can be prevented from being uneven and uneven.
Engineering construction deviations. Even if you are a skilled teacher, you can't avoid deviations when you lay bricks by hand, and if you don't leave a gap, the actual effect of tiling and the location of the gaps are very likely to fail. However, the seams at the same time bring a lot of trouble, for a long time, the gaps under this dent often hide stains that cannot be cleaned, which not only endangers the beauty of the house, but also brings environmental health and safety hazards.
Within 3-5 days after the tiles are laid, it is suitable to do beautiful seams.
Cleaning the tile gaps, I think part of the money is the removal fee, the removal takes up a lot of time and energy, use a brush to clean up the remaining concrete, cement mortar, interior wall putty powder, smoke and dust in the tile joints, and then use various tools, nails, ash knives, vacuum cleaner towels, these to clean the joints. Through the previous decoration steps, the tile joints can be said to be very difficult to remove. After waiting for dryness, wipe both sides of the tile seam with beautiful sewing wax, and wipe both sides of each seam, especially the antique tiles, which are the kind of tiles with potholes on the surface.
beautiful sewing with color; According to the color of the tile to match the color of the seam, choose a color similar to the color of the tile, you can also choose the opposite color, mainly or depending on your personal preference. For example: light yellow tiles with hippopotamus tooth gold seams, the overall beauty seam effect is very good, and the hippo tooth gold seams are low-key luxury and tasteful.
Removal of tile crevices for environmental hygiene; Use special tools to clean up the concrete dust in the tile gaps, and use a vacuum cleaner to suck the concrete dust neatly, to ensure that each tile gap is clean and clean, without a little dust.
-
1.The color matching of the sewing agent The color of the sewing agent is well matched, and the effect will be good. It can be matched according to the color of the tile, and it can also be matched according to the decoration style.
Each one will have a different effect. 2.Clean the tile before the seam Be sure to clean the tile before doing the seam, not only the surface of the tile, but also carefully clean the tile gaps to ensure that there is no dust and water stains in the gaps, otherwise it will affect the curing effect of the seams.
3.Gluing and pressing skills When sizing and pressing seams, we must pay attention to the skills, when applying sizing, the strength should be uniform, do not play intermittently, and the dose in the gap is more or less. When pressing the seam, try to press it all at once, and don't press the seam back and forth repeatedly, which is easy to appear.
4.Do not step on the tiles after completion After making the perfect joint, you need to wait for curing, at this time, you should protect the construction site and do not step on the tiles at will. Only when the sewing agent is stable can it be cured smoothly.
-
Before filling the seams, it is necessary to make thorough preparations. When choosing the beauty sewing agent, you must not buy one that is too poor in quality. We need to prepare glue guns, brushes, sponges, sewing agents and other tools, and bring finger covers before construction to avoid sticking the sewing agent on the fingers during the construction process.
-
When choosing a tile grout, you should first pay attention to the choice of color. If the color of the tile is a dark series, then you need to choose a light series of beauty joints;
In the areas of the bathroom, shower area and kitchen area, you can choose the best sewing agent, because there are more water stains and oil smoke in these areas, while other areas can choose a moderate sewing agent;
Be sure to choose a good waterproof performance, so as to prevent sewage from seeping into the gaps in the tile;
Before using the sewing agent, be sure that there is no water in the gaps.
-
What problems need to be paid attention to when making beautiful seams for tiles?
First, it is best to complete the construction of the joint agent one week after the tile is pasted. Some workers are inexperienced or lazy. Before the tiles are laid, sewing is carried out before the adhesive dries. In this way, after the adhesive is completely dry, the gap may become larger, resulting in a poor sewing effect and affecting the overall appearance.
Second, the beautiful sewing requires a very clean environment. If there is some dust and wood chips in the gaps, it will greatly affect the sewing effect. In this case, we need to sew after the furniture is installed, but in the kitchen, we need to sew before the ceiling.
It's the same principle. Ensure that the environment is clean, and there is no too much dust, mud, and wood chips, which will affect the sewing effect. Also, it is best to leave a gap of 1-2 cm before sewing, which is easier to construct and the effect is better.
3. Sewing must not be carried out in dark and damp weather, such as rainy and cloudy days. The moisture content in the air is relatively high. On the one hand, the sewing is not dry enough, and the effect is not good.
When the weather is dry, you will find some adhesive outflow or various other problems. Choose dry weather.
Fourth, because the gap of the floor tile is relatively deep, we require that the gap must be filled when the seam is beautiful. For this reason, there will be more opportunities to use artwork, because artwork is basically charged according to the square meter or linear meter of the brick joint. If you're looking for a professional artist to do the art for your tiles, there may be a chance of cutting corners.
They only fill you with the caulk at the top of the brick, not deep in the brick. In this case, in a short period of time, because the sewing agent solidifies on the top, the situation below cannot be seen, and after a long time, the sewing material will become dented. At this point, it is recommended that the art be done in two steps.
The first step is to do the art only inside the gaps in the tiles, and the second step is to do the art on them. This is done in two steps, which can ensure that the caulk can fill in the gaps of the tiles and will not dent the caulk in the future. Everyone should keep this in mind.
The above is all about the content that needs to be paid attention to when making beautiful seams for tiles, I hope it will help you!
-
Usually when we do beautiful seams for tiles, we must be in the construction within a week after pasting the tiles, we must open the window for ventilation after pasting the tiles, before the beautiful seams, we must do a good job of cleaning, we must clean the gaps in the tiles, when using the seams, the temperature is best above 5, do not construct in rainy weather. Be sure to use the material of epoxy magnesia, this material is anti-corrosion, anti-oxidation, and also has a certain aesthetics, and the cost will not be very high.
-
When doing beautiful seams, you must choose a better quality beauty seam agent, and then you should also ask a professional master to make it, so that the effect will be better, and at the same time, it can also make the tiles more flat and not easy to crack.
As the saying goes, "cheap is not good, good is not cheap", but for decoration, if you have the mentality of picking expensive, you must be the best, just like the fish and meat slaughtered on the chopping board of the building materials market. Because there are many types, patterns and sizes of ceramic tiles, many people spend most of their time choosing tiles when they do decoration. >>>More
With the improvement of people's living standards and the change of aesthetic concepts, the home decoration. >>>More
If everyone decorates.
over, room. If you are going to find tiles. >>>More
What do you mean by Shenma? I don't understand.
1. The rafting period is from April to October every year, and the rafting activity period in the central region is slightly shorter than that in the southern region, and changes with weather and hydrological conditions; >>>More