The car fell into a ditch, the right front wheel was suspended and the chassis was broken

Two people sit in the left rear, increase the weight of the left rear, let the right front go up, and then hit the direction to the right, a half clutch low speed, so that the tire surface can climb on the road. Once the right front wheel is on the road. The direction is quickly corrected to the left.

The automobile chassis is composed of four parts: the transmission system, the driving system, the steering system and the brake system. The role of the chassis is to support and install the automobile engine and its various components and assemblies, form the overall shape of the car, and accept the power of the engine, so that the car can move and ensure normal driving.

The power emitted by a car's engine is transmitted to the driving wheels by the drive train. The drive train has the functions of deceleration, speed change, reversing, interrupting power, inter-wheel differential and inter-axle differential, etc., and works with the engine to ensure the normal driving of the car under various working conditions, and has good power and economy.

A series of specialized devices used in automobiles to make the outside world (mainly the road surface) exert a certain force on some parts of the car (mainly the wheels), so as to force braking to a certain extent, collectively referred to as braking systems. Its function is: to make the moving car to force deceleration or even stop according to the driver's requirements; Stable parking of stopped cars in various road conditions, including on ramps; Keep the speed of the car going downhill steady.

"Pulling" (pulling or hauling) the car out for after-sales service Find out the deformed or damaged parts and see if there are any damaged paint surfaces.

Overhaul, adjust or replace the faulty parts, and do a good job of positioning, if there is paint damage, the chassis can be repaired after completion.

Hello, this is broken by the collision, it is recommended to repair the shop, if it can help you, I hope to set the best, thank you.

Check it out at 4S or a professional auto repair shop, and if my answer is helpful to you, please set it to. Thank you!

If the pit is relatively shallow, because there is mud or the ground is soft and can not come out, you can pad something that increases the friction of the tire, such as small stones, sand, hay, etc. to pad the wheels, and expand the bottom grade of the pit in the pit, pave it flat, and lay stones on it, and the front of the pit is slowly parallel to the ground in a slope way, and then carefully open it in a low gear. If the pit is deep, be sure to find someone to help lift or pull it out. Or call ** to ask the tow company to tow the car out with a tow rope.

Look at the chassis part of the leakage, if not, you should find a straight road called the straight road to try the vehicle's straight-line driving stability, because even if there is no oil leakage, the external force may also deform the right suspension, resulting in the front wheel alignment value is not right, if the above have been checked, it should be regarded as no major problem, if you are not at ease you can go to the local 4S lift car for inspection.

Hello, I understand your feelings, 1 If the front driving wheel of the car is stuck in the pit, because the resistance of the pit to the wheel is too large, the traction provided by the driving wheel cannot resist the resistance of the pit, and the vehicle cannot move. 2. After shoveling off the loose soil nearby, pay attention when starting the car again, take a few steps forward, and reverse backwards if the tires are still idling. When the vehicle moves, the people below should block the tires with bricks in time to avoid running back into the pit, so that the vehicle will quickly return to the flat road.

If I can help you, have a good life.

It is necessary to go to the maintenance plant to inspect it, and use the elevator to lift the motor vehicle to check whether the chassis part of the vehicle is damaged, and the damage should be repaired in time.

Car chassis. The most susceptible areas for injury are none other than oil pans and tubing, and if you find an oil leak or an unclear noise after a knock, it may indicate damage. The chassis of the car is not so vulnerable, and the average degree of small bumps is still no problem at all, although the oil pipe is more susceptible to scratches.

However, these pipes will be hidden and protected in the grooves of the chassis steel plate, not above the level of the chassis. In addition, the oil pan is not so easy to break, so there is no need to worry too much.

Summary. Hello, I have seen your question and am sorting out the answer, please wait a while

Hello, I have seen your question and am sorting out the answer, please wait a while

If the height of the fall is not very large, the image of the chassis is negligible; However, if the height of the slow auspicious is larger, the harm is more obvious, which may lead to the suspension deformation of the chassis, and the oil pan will be shattered and cause oil leakage. Hope mine can help you!

The height is not too high, I have fallen twice in the past three days, both of which are from the left front wheel, and I feel that the chassis has been scraped every time, and the sound is still a little loud.

As long as the driving is not abnormal, there is no oil leakage, there is no problem, the general false height drop difference is sold down, just hang the chassis parts, there will be no big problems with the line, you can also find a store to lift the car up to see.

Good. If you think mine is good, can you give a 5-star thumbs up? In the future, you can also click on my avatar to ask targeted questions!

Should ordinary tubing line pipes and the like not be scraped?

If the line is broken, the instrument will alarm, and if the oil pipe is broken, it will leak oil, which is more obvious. Good.

When we usually go to a section of the road with poor road conditions, we should slow down and avoid the vehicle supporting the bottom. But if the front wheel of the vehicle falls into a pit, will the suspension break? In fact, the front wheel of the vehicle will not necessarily be damaged when it falls into the pit, as long as it is not too large, the impact will not have a very serious impact on the vehicle structure.

Will the suspension break when the front wheel falls into the pit?

This depends on the specific situation, not that the front wheel will be damaged if it falls into the pit, but we need to check the following parts after the vehicle is supported;

1. Triangle arm and steering knuckle. These two parts are very important for the front suspension, if the driver still plays the steering wheel after the front wheel falls into the pit, then the steering knuckle is easy to damage, and it is best to check it on the elevator if possible;

2. Tires. After the front wheel falls into the pit, the wheel will be greatly impacted, and the tire is likely to be broken at this time, so it is necessary to check the tire condition in time after such an accident;

3. Subframe (Yuanbao Liang): The subframe is responsible for supporting the engine and gearbox, which also has a great impact on the structural strength of the vehicle. If the ground at the place of the incident is relatively hard, it may cause the ingots to deform.

What should I do if one side of the car falls into the ditch?

1. Try to get out of trouble. If you are driving a four-wheel drive model, you can put in a low-speed four-wheel drive gear to get out of trouble by yourself, if you are a front-wheel drive model, then you can only wait for the trailer to rescue;

2. Check the status of the vehicle. Inspect the vehicle for damage to components such as the triangle arm, steering knuckle, and tires in situ. Generally speaking, as long as the impact is not too strong, the triangular arm and other components will not be damaged;

3. If there is no problem, you can continue to drive, and if there is a problem, you can only call ** and let the insurance company send a tow truck.

How to avoid vehicle underpinning

1. Predict the road conditions in advance. When encountering roads with complex road conditions, slow down and look at the six roads to avoid direct pit pressing;

2. Know the limits of your vehicle. Know the wheel diameter and ground clearance of your vehicle in advance, and when you encounter road conditions that you don't have confidence in, you'd rather take a detour than break through;

3. Install the chassis guard plate. The chassis guard can ensure that the vehicle will not be greatly damaged even if it is supported by the bottom, which is even more necessary for models that need to be off-road often.

This situation will not have obvious damage to the chassis, after the vehicle is rescued, you need to go to the maintenance plant to detect it, use the lift to lift the motor vehicle, to check whether the chassis part of the vehicle is damaged, and the damage should be repaired in time.

The most problematic place on the side of the car is **, which is the data of the four-wheel alignment system of the motor vehicle. At this time, it is necessary to do four-wheel alignment for the motor vehicle to adjust the relevant data and the vehicle can drive normally.

What do you need to pay attention to when driving motor vehicles, when the vehicle is driving, it is necessary to maintain the normal speed of the wheel, and can not exceed the speed, especially in the case of rain and snow sections and bad roads, once the vehicle has a side slip, it is necessary to adjust it in time to avoid accidents in the vehicle, especially in the muddy road, driving the vehicle should be extra careful, slow down and slow down.

Photo by Car Selector) Model Y Model 3 Model X AION V Ideal One Xpeng P7 @2019