How far should the gutter be from the wall, and how far away is the gutter from the root of the wall

Legal analysis: generally riser 20 25 cm, more than 35 cm to the side, buy a toilet generally buy 300 pit spacing, wall to the pipe more than 40 cm, if determined to pave the wall after turning.

Legal basis: Regulations on Urban Drainage and Sewage Treatment

Article 5 The competent departments of housing and urban-rural development shall guide and supervise the national urban drainage and sewage treatment work.

The competent departments of urban drainage and sewage treatment of local people's governments at or above the county level (hereinafter referred to as the competent departments of urban drainage) shall be responsible for the supervision and management of urban drainage and sewage treatment within their respective administrative areas.

In accordance with the provisions of these Regulations and other relevant laws and regulations, the people's ** and other relevant departments at or above the county level shall be responsible for the supervision and management of urban drainage and sewage treatment within the scope of their respective duties.

Article 6 The State encourages the adoption of various forms such as franchising and purchasing services to attract social funds to participate in the investment, construction and operation of urban drainage and sewage treatment facilities.

The people at or above the county level encourage and support scientific and technological research on urban drainage and sewage treatment, promote the application of advanced and applicable technologies, processes, equipment and materials, promote the recycling of sewage and the resource utilization of sludge and rainwater, and improve the capacity of urban drainage and sewage treatment.

Nineth urban drainage departments shall be prepared urban drainage and sewage treatment planning submitted to the people at the same level for approval after the organization of implementation, and reported to the people's departments at the next higher level of urban drainage for the record.

Once the urban drainage and sewage treatment plan is approved and published, it shall be strictly implemented; Where it is truly necessary to revise due to economic and social development, it shall be submitted for examination and approval in accordance with the original approval procedures.

Article 10 Local people at or above the county level shall, in accordance with the requirements of urban drainage and sewage treatment planning, increase investment in the construction and maintenance of urban drainage and sewage treatment facilities.

Gutters are facilities used to drain rainwater or sewage, usually built around houses or on the sides of roads. When constructing a gutter, it needs to be taken into account its distance from the wall to ensure that the gutter functions properly and does not cause damage to the wall.

In general, the distance between the gutter and the wall should be more than 30 cm. This is because the gutter needs to have enough space to collect and discharge the water flow, and if it is too close to the wall, it will affect the drainage effect. In addition, the close proximity of the gutter to the wall can also cause the wall to become damp, which can cause problems such as mold and rot of the wall.

In addition, the distance between the gutter and the wall needs to be determined on a case-by-case basis. If the gutter is built around the house, the foundation and topography of the house need to be taken into account to ensure that the flow of water from the gutter does not affect the house. If the gutters are built on both sides of the road, the width of the road and the traffic conditions need to be taken into account to ensure that the gutters do not affect traffic safety.

In conclusion, the distance between the gutter and the wall should be more than 30 cm and need to be determined on a case-by-case basis. When constructing a gutter, it is necessary to take into account the drainage effect and the impact on the wall to ensure that the gutter functions properly and does not cause damage to the wall.

The distance between the drain pipe and the wall is like this, there is no exact restoration, basically as the upstairs said, that is, at 35 40 cm, which is better.

1. When the pipe diameter is less than or equal to 200mm, the horizontal spacing is 15m, when the pipe diameter is greater than 200mm, it should be greater than or equal to 2 5m。

2. The horizontal spacing between the drainage pipe and the building foundation should be greater than or equal to 2 when the buried depth is shallow than the building foundation 5m。

Summary. Further information: The distance between the laying of sewer pipes and private houses should meet the following requirements:

When the pipe diameter is less than or equal to 200mm, the horizontal spacing is 15m, when the pipe diameter is greater than 200mm, it should be greater than or equal to 2 5m；The horizontal spacing between the drainage pipe and the building foundation should be greater than or equal to 2 when the buried depth is shallow than the building foundation

According to the overall plan, the layout of roads and buildings, the elevation of the terrain, the whereabouts of sewage and rainwater and other factors, in accordance with the principle of the shortest pipeline, the smallest buried depth, and as much as possible self-draining. 2. Drainage pipes should be laid in parallel along the perimeter of roads and buildings to minimize the intersection of each other and other pipelines. 3. The pipeline should not be on the sidewalk or under the grass on the outside of the road.

Hello, the distance between the drainage ditch and the building is 80 cm - 1 meter can be Ha Extended information: The distance between the laying of the sewer pipe and the house should meet the following requirements: when the pipe diameter is less than or equal to 200mm, the water stuffy flat spacing is 1

5m, when the pipe diameter is greater than 200mm, it should be greater than or equal to 2 5m；The horizontal spacing between the drainage pipe and the building foundation should be greater than or equal to 2 when the buried depth is shallow than the building foundationAccording to the overall plan, the layout of roads and buildings, the elevation of the terrain, the whereabouts of sewage and rainwater and other factors, in accordance with the principle of the shortest pipeline, the smallest buried depth, and as much as possible self-draining.

2. Drainage pipes should be laid in parallel along the perimeter of roads and buildings, and try to reduce the intersection of each other and other pipelines. 3. The pipeline should not be on the sidewalk or under the grass on the outside of the road.

Dear, hello, I am glad to answer for you the wall of the gutter is called in this design, for the beauty and safety, a wall will be added to the inside of the gutter, this wall is the drainage wall. In the words of the family, I don't know if the drainage ditch is correct and the stone side ditch is not the same. 2. The small low wall is also called the embankment wall and the lead sock blue shoulder wall.

The walls on both sides of the water-crossing pavement are called water-proof walls. The water interception wall is a kind of anti-seepage structure on the basis of the water retaining building. It is shaped like a low wall to ensure that the penetration of the foundation is good and stable.

It is poured with concrete and is located on a foundation with very little permeability.

When cutting basement gutters, the cutting position should be at a certain distance from the wall. This is because the location of the basement gutter is usually at the edge of the wall or the corner of the wall, and if it is cut directly against the wall, it will cause damage to the wall and affect the stability of the wall. At the same time, if the cutting position is too close to the wall, it will also affect the use of the gutter, because the gutter needs to have a certain space to collect and discharge the water flow.

Therefore, when cutting the basement gutter, it should be at a certain distance from the wall, and it is generally recommended to be about 10-15 cm away from the wall. This ensures the proper use of the gutter without causing damage to the wall.

In addition, you need to pay attention to safety when cutting basement gutters, and you should use professional cutting tools and protective equipment to avoid accidents. At the same time, it is also necessary to consider the direction of the drain and the location of the discharge port, so that the water can be discharged smoothly out of the basement and avoid problems such as flooding and dampness.

There is a distance from the wall. Basement drainage ditch cutting is carried filial piety can not be against the wall, the drainage ditch has water for a long time, there will be local water accumulation, both sides of the drainage ditch is not waterproof, water will seep into the wall foundation, causing the wall to sink locally, resulting in cracks, must be away from the wall eggplant good distance. When the sump is laid against the column:

Drainage ditches are provided on one side. The gutter extends to the middle of the span and has a long trembling hidden lead degree of about 4m.

The drainage communication above the courtyard wall is often referred to as "eaves ditch" or "eaves gutter". It is a facility used to collect and drain rainwater from rooftops, usually located under the eaves of a house, along the edge of a wall or eaves. The function of the eaves ditch is to collect the rainwater from the roof and discharge it to the ground through the drainage pipe, so as to avoid the rainwater from dripping directly onto the ground around the house, causing problems such as foundation settlement and wall leakage.

The material of the eaves gutter is usually aluminum alloy, stainless steel, plastic, etc., which has the characteristics of resistance to corrosion, wear and high temperature. Its shapes are U-shaped, V-shaped, semi-circular, etc., which can effectively prevent problems such as rainwater backflow, leakage, and water accumulation according to different designs and installation methods.

In daily life, the cleaning and maintenance of the eaves gutter is very important. If the eaves gutter is not cleaned for a long time, a large amount of debris and dirt will accumulate, resulting in poor drainage and even blockage. Not only does this affect the appearance and aesthetics of the house, but it can also cause problems such as dampness and mold growth inside the house.

Therefore, it is very necessary to clean and maintain the eaves gutter regularly.

The drainage ditch on the courtyard wall can be called a gutter or a gutter, and drainage measures should be taken to prevent unorganized drainage at the top, which affects the stability and durability of the courtyard wall structure, and prevents the uneven settlement of the foundation and the cracks in the wall caused by the poor drainage of the first water.