How to make the side panels on both sides of the wardrobe without revealing nails?

Home decoration is indispensable to play all kinds of cabinets, such as shoe cabinets, wardrobes, bookcases and cabinets! Although the items stored are different, the structure of the cabinet is generally the same, except for the wardrobe with a hanging area, the other cabinets are partition storage. However, in traditional cabinets, the partitions are fixed, and the immovable partitions cause the limitation of storage space!

Only place items of the right size, which will inevitably be a little imperfect! Therefore, some ingenious carpenters have designed a storage cabinet with movable partitions, and when playing cabinets, a few more wooden squares are installed on the side panels of the cabinets, and a cabinet with a multi-purpose capacity is extra-large, and the partition can be detached and adjustable in height, which is much easier to use than the traditional fixed storage grid!

Now most families are in favor of embedded, fixed cabinets, after adding the closing board on both sides of the cabinet, what is presented in front of us is the embedded style of the cabinet, leaving no gaps, good-looking and easy to take care of, unlike the finished cabinet bought, cheap, trouble-free, but easy to hide dirt and dirt, and it is easy to bump, the durability is also poor, or add the closing plate is more practical and good-looking. After the original rough wall is decorated, it is connected to the cabinet, but it is inevitable that there will be decoration errors, the wall is not perpendicular to the ground and the top surface, and the wall is uneven, so that the finished cabinet is installed against the wall, it is obvious that the gap can be seen, and the dirt and dirt are ugly.

This design method is especially suitable for shoe racks, because the height of the shoes is different, but the spacing of the partitions of the shoe racks on the market is the same, resulting in some tall boots can not be placed, and the low shoes are put in and waste of space, and the design is a movable partition, you can adjust the spacing between the partitions according to the height of the shoes! This movable partition design is also very easy to install, to put it bluntly, just like the refrigerator installation partition, as long as the side panel of the cabinet is made with the same card slot as the refrigerator, the partition can be fixed and removed at any time!

Or it is more troublesome to make a groove, then directly nail it to the side board with a wooden square, and the distance between the wooden square and the wooden square can just plug a board, so that the purpose of movable and detachable can also be achieved! The shelves designed in this way are flexible and changeable, and the height of the floor can be adjusted, not only can it be used to design the partition of the shoe cabinet, but also the partition of the bookcase, because the size of the books is different, the storage space can be adjusted appropriately, and a lot of books can be installed. In addition to installing wood on the side panel, you can also use the partition and the side panel itself to make a card slot design, so that the design of the cabinet can be firmly fixed on the side panel without a nail, and at the same time can achieve a flexible effect!

In addition to being flexible, such a unique shape is also fashionable and fun!

When making a wardrobe, if you want to keep the nails on both sides of the side panels exposed, you need to use built-in nails, so that the nails can be well hidden inside the board, so that they cannot be seen from the outside.

Punch the nail inside with a special treatment and you're good to go. Alternatively, you can paint the outside after the nails have been nailed.

You can make oblique nails under the partition, preferably with screws, which is stable and easy to operate! On-site production can also be a three-in-one fastener, see if the master has tools. Or wardrobe joints with diagonal nails, or the most popular 2-in-1 fasteners at the moment.

with glue. Glue the sides together so you don't see the nails.

The backplate does not need to be opened, slotted reasons:

1. It can be simplified when installing.

2. Do not let the backboard directly touch the wall, which can prevent moisture.

3. The cabinets and wardrobes are all cube structures, the slotted installation is more reasonable and convenient, the side panel contact wall area is small, and the wall is uneven and easy to adjust.

The back panel of wardrobes and cabinets does not need to be slotted, only the side panels are slotted, generally there are 9mm slots, there are also 15mm slots, there are 2 purposes of slotting, one is that the installation can be simplified, and a very important factor is that the back plate is not directly in contact with the wall, it can be moisture-proof, next time I am talking.

Summary: Good evening! Dear Pleasure to serve you!

The back panel of the wardrobe is installed directly on the top and does not need to be slotted.

The back panel of the wardrobe is installed, whether it is directly nailed or slotted.

Good evening! Dear Pleasure to serve you! The back panel of the wardrobe is installed directly on the top and does not need to be slotted.

Nail it up, but you can't dismantle it.

The slotting can be taken apart.

Are you a cabinet?

I bought a cabinet, but I couldn't find a slotted store.

If you nail it, you can also remove the nail and remove it later.

No, the back panel is small, it's okay, the size of the big one to dismantle a pit, the back of the current cabinet is very thin, not like the previous solid wood board thick, thick to groove so it is still custom-made.

Thank you for customizing yourself, of course, you can.

You are welcome! If you're satisfied, don't forget to give me a thumbs up! Have a great day!