How to identify whether a vehicle has an accident from the interior? 10

Personal experience, once a taxi home, in the middle of the road tire broken, no gas has been walking, is next to the driver said, I was sitting in the back, the car driving process is a little bumpy, there is a bit of external spin, the speed has not been fast, followed by look at the parameters on the dashboard, the parameters displayed on the dashboard are correct, such as the engine red, that is, there is a problem with the engine, need to pull over to check whether the vehicle has potential safety hazards after driving, I hope that all drivers and friends can drive safely.

Look at whether the interior of the car is different from the old and new, see whether the seat has been replaced or pried, listen to whether the sound is normal after the car starts, and judge whether it is an accident car based on the above situation!

It is advisable not to identify from the inside, it is better to be with the exterior and open the hood and lift the car up, it is difficult to see from the inside of the car alone.

1. Does the accident vehicle have to be identified?

1. The accident vehicle is not required to be identified, and it can not be done. If the relevant laws and regulations require inspection and appraisal, the traffic management department of the public security organ shall, in accordance with the relevant regulations, entrust a qualified appraisal agency to conduct inspection and appraisal within three days from the date of the conclusion of the investigation at the scene of the accident. If the on-site investigation needs to be inspected and identified after three days from the date of completion, it shall be reported to the traffic management department of the public security organ at the next higher level for approval.

2. Legal basis: Article 72 of the Road Traffic Safety Law of the People's Republic of China.

After receiving the traffic accident report, the traffic management department of the public security organ shall immediately send traffic police to the scene, first organize the rescue of the injured, and take measures to restore traffic as soon as possible.

Traffic police shall conduct inquests and inspections at the scene of traffic accidents and collect evidence; The accident vehicle may be detained for the purpose of collecting evidence, but it shall be properly kept for verification.

For the physical and mental conditions of the parties and other professional examinations, the traffic management department of the public security organs shall entrust a special agency to conduct an appraisal. The evaluation conclusion shall be signed by the evaluator.

2. How to assess the damage of traffic accidents.

1. Report the case to the insurance company;

2. Show the driving license, driver's license, ID card, and insurance documents to the claims adjuster;

3. The claims adjuster shall complete the on-site investigation and preliminary damage assessment;

4. Sign for the review of the claim documents, and fill in the "Notice of Motor Vehicle Insurance Accident and Claim", and sign and confirm by both parties;

5. Go to the on-site damage assessment point of the auto insurance claim service point to determine the loss, and fill in the "Motor Vehicle Insurance Accident Vehicle Damage Project Confirmation Form";

6. Both parties sign and confirm, and the claims adjuster issues a task order to determine the maintenance items and maintenance time.

Today, I will talk to you about the "accident car" and teach you a few ways to identify the "accident car".

"Accident vehicle" refers to a vehicle that is damaged by an accident caused by unnatural wear and tear, resulting in a decrease in mechanical performance and economic value. "Accident vehicles" generally refer to vehicles with structural damage, and soaking trucks and fire vehicles also belong to the category of "special accident vehicles".

You must know that once the structural components are partially damaged, even if they are repaired by stretching, knocking or other means, they cannot restore their overall body rigidity, and if they collide again, they are likely to "fall apart".

In the process of choosing a used car, the frame is a very important part of the inspection, you can not take it lightly, if you have a hard time grasping, find a friend who knows how to repair to go with you, help you check.

When consumers choose a used car, they will always worry about whether there will be a major accident. Yes, the extent of the accident is directly related to the final transaction**, the old motor vehicle appraisal appraiser Wei Zheng told reporters that when choosing a second-hand car, in addition to mastering the advantages and disadvantages of key components such as engine, brake, transmission, transmission, electrical equipment, etc., it is also very important to master the accident situation of the vehicle. And inspecting the frame is a good way to tell if the car has a crash.

Look at the surface test drive to judge the accident vehicle.

Most vehicles that have been involved in accidents will leave marks on the frame, it's up to you to tell if you can tell.

Most sedans adopt the "integral body" structure, that is, the overall design of the body frame; However, most trucks and SUVs still use a separate body and a separate frame design; In addition, some "road and city" SUVs also adopt a monolithic body design, which is often referred to as "CBV" (sedan chassis SUV) and other models.

After the frame is damaged, there may be some adverse reactions while driving, which can be judged by the test drive.

For example, uneven steering is also unstable; There will be the sound of wheels during the straight journey; Tires with eccentric wear marks; Phenomena such as uneven steering roll and mistracking during braking. These reactions may be related to frame bending, indicating that there has been an accident. ��

Dig carefully to identify the accident used car.

When inspecting the vehicle on site, the following methods can be used:

1.Find a straight line.

Check whether the front and rear wheels on the left and right sides are in a straight line, not a straight line, indicating that the overall frame is bent.

2.Amount of gaps.

Measure the clearance between the rear side of each wheel and the wheel arch in about the same way, otherwise there are signs of flexing in the frame or overall body.

3.Look for traces.

When the hood is opened, you can see the two stringers that run through the entire nacelle, which are usually not easy to see under the battery, and easy to see on the left. Check them for signs of welding or cracking. In the case of a rear-end collision or side impact, the frame will be crushed and bent or cracked, and welding will be required for repairs.

4.Look for cracks.

Check the fender part of the car, which is also the key part to judge whether the overall body of the car has an accident, if there are traces of welding or cracking, it means that it has had a side impact accident; If there is a condition to open the trench, it can be clearly checked.

Online car condition identification experts, click on my avatar to see the introduction, and understand the method of checking more and making celebrations.

We are a professional ** car condition inquiry expert, click on my avatar to see the introduction, take you to understand how to quickly query vehicle accident accident accident insurance records, maintenance records and other vehicle conditions.

Second-hand cars are easy to buy and sell certain base sails to check the condition of the car, click on my avatar to see the introduction, teach you a quick query with one click, and you can operate it on your mobile phone!

Click to talk about my avatar to see the introduction, and take you to understand the car condition query method! Professional query [accident record], [4S maintenance record], etc., the data is accurate, and the report is issued in seconds! One-click investigation of bad car conditions such as accident scattered old hall cars, soaking cars, meter adjustment cars, and fire cars!