How to disassemble the Philips vacuum cleaner FC8202 motor

As a national old brand, Philips vacuum cleaner is the choice of many families, and it has been left behind for a period of time before, mainly horizontal vacuum cleaners, and now the trend is almost all handheld vacuum cleaners, so Philips is also developed to catch up with the trend, so how to disassemble Philips vacuum cleaners, used for so long, do you understand?

The first step of the horizontal vacuum cleaner is to disassemble the fan, unscrew the shell with a screwdriver and take it off; In the second step, the button to adjust the suction power is removed, and the guide wheel is removed, and the parts such as the gasket ring, gasket, and impeller are removed in turn; The third step is to disassemble the brushes; The fourth step is to pull out the bearing cover, and the next step is to replace whatever you need.

In fact, the text description is still relatively abstract, you can try it yourself, because each screw is fixed, so remember the various steps and the location of each part when disassembling and installing, so as to avoid subsequent installation. Keep in mind that the parts are basically not washable, so you should prepare a small brush and brush it clean.

The disassembly method of the handheld vacuum cleaner is even simpler, you can unscrew it along the screw, and in many cases, you can do a deep cleaning without dismantling it too smooth.

How to disassemble the Philips vacuum cleaner, the main thing is such a step, in fact, we had better hand it over to a professional will be more assured.

Don't disassemble it, just send it directly to your local Philips repair station for warranty or repair!

Summary. Hello, vacuum cleaner disassembly method: the first step of the horizontal vacuum cleaner is to disassemble the fan, unscrew the shell with a screwdriver and take it off; In the second step, the button to adjust the suction power is removed, and the guide wheel is removed, and the parts such as the gasket ring, gasket, and impeller are removed in turn; The third step is to disassemble the brushes; The fourth step is to pull out the bearing cover, but it is not recommended to disassemble it personally, it is easy to fail.

Hello, the disassembly method of the vacuum cleaner: the first step of the horizontal vacuum cleaner is to disassemble the fan, and use a screwdriver to unscrew the shell and take it off; The second step is to adjust the suction power to make the button of the burning Hu Bi, remove the guide wheel, and remove the gasket ring, washer, impeller and other parts in turn; The third step is to disassemble the brushes; The fourth step is to pull out the bearing cover, but it is not recommended to disassemble it personally, it is easy to fail.

Summary. Press the front cover button and gently remove the front cover from the vacuum cleaner in front of you.

2).Take out the dust filter bag and pour the garbage in the transparent dust chamber into the trash can.

3).If you have inhaled fine powders, remove the dust bag holder from the dust filter bag and gently scrub the filter bag in clean water.

4).Put the dust bag holder into the dry dust bag, then put the dust bag into the transparent dust chamber, and then install the front cover on the body and buckle it firmly. Note: The dust bag should be installed in place.

Press the front cover button and gently remove the front cover from the vacuum cleaner in front of you. 2).

Take out the dust filter bag and pour the garbage in the transparent dust chamber into the trash can. 3).If you have inhaled fine powders, remove the dust bag holder from the dust filter bag and gently scrub the filter bag in clean water.

4).Put the dust bag holder into the dry dust bag, then put the dust bag into the transparent dust chamber, and then install the front cover on the body and buckle it firmly. Note:

The dust bag should be installed in place.

The landlord can go to the Philips authorized repair service center to find the repair location in his location, hoping to help you.

Shandong Heze Yuncheng after-sales maintenance ** number.

Jiujiang after-sales service is ???

Philips vacuum cleaner Disassembly method:

1. Lift the front vacuuming cover, take out the dust storage vessel, see that there are 4 screws in the front and back, and turn it with a word or hexagonal turn of the appropriate size to turn out the fixed screw.

2. Slowly separate the power switch knob, and take out the button, and turn out a fixed screw below.

Three, with the two, separate the shrink power cord button, and take out the button, turn out the following fixed screw.

Now you can gently separate the lid and see the integrated chip and other parts inside.

It can also detect the power-on situation, and the motor can also be removed.

Summary. Hello, I'm sorry, I can't find ** at the moment.

Hello, I'm sorry, I can't find ** at the moment.

First, the take-up button is warped down, and then the screws at the empty wheel line button and in the middle and front of the hall are knocked down. Then knock down a screw close to the wire reel behind the motor key cover, you can take down the whole inside, and then knock down the screws on the other 3 motor covers, you can disassemble the motor. Philey's machine is a Torx screw, and there is also a tamper-evident screw in the back.

First, the take-up button is warped down, and then the screws at the empty wheel line button and in the middle and front of the hall are knocked down. Then knock down a screw close to the wire reel behind the motor key cover, you can take down the whole inside, and then knock down the screws on the other 3 motor covers, you can disassemble the motor. Philey's machine is a Torx screw, and there is also a tamper-evident screw in the back.

Is there such a motor.

I don't have it here.

Step 1: Remove the housing of your Philips FC8086 vacuum cleaner. It is possible to remove its case from the base using a screwdriver or other tool.

Step 2: Remove the strainer from the base and remove it to the side for later use. Step 3:

Disassemble the motor and dust bag. The motor can be removed with a screwdriver on the base, while the dust bag can be removed to the side for later use. Step 4:

Remove the hose. The hose can be removed from the base using a screwdriver or other tool. Step 5:

Remove the tip and remove it to the side for later use.