How long before flight departure to board? What time does boarding start before departure?

Updated on military 2024-07-15
9 answers
  1. Anonymous users2024-02-12

    Boarding is usually 20 minutes before the scheduled departure time.

    Check-in usually starts 90 minutes in advance. Get a boarding pass and then go through the security check. Then go to the boarding gate designated on your boarding pass. Boarding starts half an hour before the flight departure time on the ticket.

    Boarding pass check-in closes 45 minutes in advance.

    Finish. In addition, civil aviation regulations allow airlines to overbook 10% of air tickets, in order to increase utilization and prevent some people from changing the plane and causing dissatisfaction, so it is recommended to check in online one day in advance for popular flights.

    Or go early on the day so you don't have to be left out and don't have a seat and force you to change.

    Boarding process by air:

    1. Enter the terminal building 90 minutes before departure.

    (especially for first-time friends, it is recommended that you should arrive early) to the check-in counter where you took your flight.

    Present your valid documents at the time of booking to exchange for your boarding pass, and if you have any baggage, you can check it in at the same time. If you can't find the check-in counter, pay attention to the electronic display screen at the entrance of the hall, which is available at each airport. If you really can't do it, just ask the staff.

    2. After changing the boarding pass, pay attention to the boarding gate, the card is printed, and then take the certificate and boarding pass to the security check.

    After passing the security check, you will go directly to the corresponding boarding gate to rest and wait.

    3. Start boarding 30 minutes before take-off, pay attention to the electronic display screen above the boarding gate, and there will also be announcements. Close the boarding gate 10 minutes before departure, just be careful not to delay boarding, the late plane will not wait for anyone.

    4. After getting on the plane, find your seat according to the seat number on the boarding pass, sit down, and buckle your seat belt.

    Then you can wait for takeoff. If the mobile phone is to be turned off, do not let you use airplane mode.

    5. After taking off, you can wait for landing, and leave the station after arriving, and end the trip. If you don't have luggage, you can go to the unluggage lane, and if you have luggage, you must go to the luggage aisle to pick up your luggage.

  2. Anonymous users2024-02-11

    40 minutes.

    It is no longer possible to exchange for a boarding pass. So we should arrive at the airport within two hours before the flight departs, and it may take nearly 20 minutes to check in, and it is normal to queue for 30 minutes during busy periods.

    We may also have to wait in line when we go through security, and it may take about 15 minutes to get to the gate for our flight. Therefore, it takes time, we should arrive at the airport early and check in early to prevent stepping on the check-in process, which is easy to delay boarding.

  3. Anonymous users2024-02-10

    Generally, boarding starts about 30 minutes before departure, and there may be a few minutes of departure depending on the airport and flight. For example, if there is a flight that requires a shuttle bus, then the boarding time may be a little earlier, and everyone will take the shuttle bus to the plane together.

    However, it should be noted that the check-in procedure will generally close 45 minutes before departure, so it is recommended to arrive at the airport about two hours in advance to start the formalities, including the time for security check and baggage check-in.

    Timing of aircraft boarding:

    1. Arrive at the airport two hours in advance, change the boarding pass, check in the baggage and go through the security check;

    2. Stop check-in 45 minutes before the flight takes off, and wait in the waiting room;

    3. Boarding starts about 30 minutes before the plane takes off;

    4. Boarding will stop 10 minutes before the flight takes off.

  4. Anonymous users2024-02-09

    You can't get on the plane 30 minutes before departure. The check-in time of passengers is clearly stipulated in the civil aviation passenger regulations: they must arrive at the airport for check-in 90 minutes before the scheduled departure time of the flight (120 minutes before the departure time of large passenger aircraft such as Boeing), and the check-in time is 30 minutes before the departure of the aircraft (40 minutes before the departure of international flights).

    In order to ensure the safe and punctual departure of the flight, in the limited 30 minutes, passengers must go through a security check, check the boarding pass and count the people at the boarding gate. The stowage personnel should complete the aircraft balance configuration; There are also a series of support work such as cargo, baggage loading, meal distribution, evacuation of passenger ladder trucks, aircraft taxiing, and preparations before take-off are required to be completed on time.

    Therefore, adding late arrivals in the process will cause the working hours to be very tight and even affect the punctual departure of the aircraft. If a passenger arrives late, the entire support chain will be disrupted, not only the stowage will have to readjust the flight center of gravity, print the manifest and send it to the plane; The baggage handling department may have to apply to reopen the cargo door, get on the conveyor car, and load the late baggage into the cargo hold; There are other ground support departments, and any of them will be delayed if any of them are not in time.

  5. Anonymous users2024-02-08

    Boarding is up to 40 minutes in advance. When you take a flight, you can only go to the boarding gate when you start scanning your boarding pass when you start scanning it. Generally, the boarding pass is scanned 40 minutes in advance, and the boarding gate is 40 minutes in advance.

    The airline stipulates that check-in closes 30 minutes before the departure of the flight, and it is best to be at the airport 1 hour before departure.

    Ride process. For international flights, arrive at the airport two hours before take-off, and go through check-in procedures and exit procedures such as customs, license inspection, and quarantine at the airline's counter.

    When registering, hand over your air ticket, passport, visa, yellow book and other travel documents to the counter attendant, and fill in the exit record card. After verifying that there are no errors, the next step is to weigh the baggage. There is a scale next to the counter, so you have to put it on except for your hand luggage.

    Then the waiter will take the luggage that needs to be checked to the counter and return the rest of the luggage to you; And fill in the weight and number of pieces on the ticket, hang the checked baggage on the baggage ticket, and hand over the receipt and ticket to the passenger for safekeeping, and the registration is completed.

  6. Anonymous users2024-02-07

    Under normal circumstances, check-in closes 45 minutes before the flight takes off, and the waiting room waits; Boarding begins approximately 30 minutes before departure; Boarding stops 10 minutes before the flight takes off, please arrange your time reasonably and have a wonderful flight journey!

    Check-in procedure: 1 hour and a half before domestic flights. International flights arrive at the airport 2 hours earlier.

    2. After arriving at the airport, first look for the check-in counter (a large row of connected counters), each counter has a display screen showing the airline name and flight number, find the counter corresponding to the flight number you took, and exchange your ID card for a boarding pass.

    4. If you want to purchase flight accident insurance, you can go to the main service desk at the airport to purchase it. 5. After changing the boarding pass, you can enter the security channel, where your security will be checked, and if there are prohibited items, they will be disposed of here.

    6. After passing through the security channel, enter the isolation area, and after arriving at the isolation area, follow the boarding gate prompted on the boarding pass, find the boarding gate, and rest at the entrance and wait for boarding.

    7. After the plane docks on the bridge, board the plane with the boarding pass, and after entering the cabin, find the seat indicated on the boarding pass. If you have carry-on luggage, you can put it in the overhead suitcase.

    8. Fasten your seatbelt and start a pleasant flight.

    Aeroplane (airplane) refers to a heavier-than-air aircraft with one or more engines that generates forward thrust or pull, and lift is generated by the fixed wings of the fuselage. Airplanes are the most common type of fixed-wing aircraft. According to the type of engine used, it can be divided into jet aircraft and propeller aircraft.

  7. Anonymous users2024-02-06

    The reason for taking the plane two hours in advance is that you can't board the plane half an hour before takeoff, and partly because there are so many procedures for taking the plane. Therefore, in order to be on the safe side, many people will go to the airport two hours in advance to wait for their flight, so as not to delay their travel trip. Actually, I didn't really understand why I had to take a flight two hours earlier, and I thought it was a huge waste of time.

    But once I actually walked through the process myself, I understood why I was doing it.

    There is a rule that you cannot board the plane half an hour before departure. Airplanes are different from trains and high-speed trains, and there are various safety checks before takeoff. So it costs a little more than the world, which is why the plane can't get on the plane half an hour before takeoff.

    This is because it is necessary to check and confirm the system after the cabin is completely closed. This set of processes cannot be interrupted in the middle, so you need to reserve about half an hour for inspection and confirmation.

    Another reason for taking a flight two hours earlier is that it is a hassle to take a flight. In addition to going through the same security check as you would on a train, some people may also need to check it in. It's a time-consuming process, which is why everyone is prepared to fly.

    Moreover, the security check of the aircraft is a little stricter than the general security check, which is naturally more time-consuming.

    Based on the above, I think you need to take the flight two hours in advance, partly for safety, and on the other hand, to allow plenty of time to prepare. In fact, if you are not very busy, you can get on the plane half an hour before the flight takes off. It's just that it is generally recommended that when you take a plane, you should go to the airport a little earlier to wait for the opportunity to search for a more secure person.

    The rules for time are not that strict.

  8. Anonymous users2024-02-05

    Check-in closes 30 minutes before departure for domestic flights and 45 60 minutes before departure for international flights.

    It is recommended to arrive at the airport 90 minutes early for domestic flights and an hour earlier for international flights. The check-in time varies from flight to flight, with check-in closing 30 minutes before departure for domestic flights, 45 minutes before departure for some flights, and 45 to 60 minutes before departure for international flights.

    There are rules on how long to board the plane in advance, but there are some different airlines that will have a little difference, and the overall will not be much different.

    Register things you need to pay attention to

    After hearing the boarding announcement, there will be a service staff at the boarding gate to tear the boarding pass, and then go to the boarding gate to hand the boarding pass to the service staff, and the service staff will tear a small ridge from the boarding pass, and the other parts will be returned. It is better to arrive at the airport about 2 hours in advance, and the check-in process usually starts 90 minutes in advance.

    Obtain a boarding pass, then go through the security check, and then go to the boarding gate designated on the boarding pass. Before the plane takes off, the staff should calculate the number of passengers, the number of luggage, the weight, the mail, etc., and carry out the settlement of the load balance according to the above data, and if the flight conditions are met, the aircraft can take off.

  9. Anonymous users2024-02-04

    How long before the plane takes off to start boarding, depending on the size of the airport and the airline, there are three ways to know: 1. When we order a ticket, we need to fill in the contact mobile phone number, after success, the airline will send the flight information to the mobile phone by SMS on time; 2. We can self-check in online, and then we can view the information about the flight in real time; 3. You can also call the customer service at the airport for consultation.

    There are three ways to know when your flight check-in.

    Most airports start boarding 30 minutes in advance, but because of the size of the airport, airlines, and even flights, if you want to know the exact time, you can use the following three methods:

    1. Check the mobile phone text message law: when we successfully purchase a ticket, the airline will send us the flight status in a timely manner, including: the time of starting check-in, the check-in counter, the start of boarding time and other information, which are sent to the contact mobile phone number filled in when we purchase tickets by text message, we must check in time, which is a way to passively obtain flight information;

    2. Self-service check-in method: just a more active way, that is, we can check in through online self-service check-in, so that we can query the real-time information of the flight and plan their itinerary reasonably.

    3. Customer service consultation method: each airport has its own customer service**, we can call at any time, and then consult the customer service staff to consult the information of their flight, including: boarding time, boarding gate, location of check-in counters, special suffering situations, you can also ask the airport for help.

    Imitation. The size of the airport and the way boarding is conducted affect the start time of boarding.

    Friends who often travel by plane will definitely find that the starting time of boarding is not fixed at different airports and different flights, generally from 30 minutes to 45 minutes, and the starting time will be printed on the boarding pass, and the same is true for the electronic boarding pass, so what is the reason for the start of the boarding time? The main aspects are as follows:

    1. The most common is to board half an hour in advance, this situation is generally to board on the bridge, about 15 minutes, the plane will be closed 10-15 minutes before takeoff, and then start taxiing to the runway, waiting for the take-off notice;

    2. Large-scale airports, especially those that need to taxi for a long time from the covered bridge to the runway, such as: Capital Airport, Shanghai Hongqiao, Pudong Jisui Shed, this kind of large-scale, individual flights will start boarding 45 minutes in advance, and then close the hatch 15 minutes in advance.

    3. When we buy air tickets, we often see two indicators of punctuality rate and bridge rate, the punctuality rate is very well understood, representing the data of the plane on time, so what does the bridge rate mean? When we board or get off the plane, we also have to take the shuttle bus out of the airport, which will reduce the bridge rate, that is, the plane is directly parked at the bridge entrance, and passengers can board the plane directly from the boarding gate;

    Need to pass.

Related questions
11 answers2024-07-15

What checks does a pilot do on an aircraft before takeoff?

7 answers2024-07-15

Ticket itinerary.

It can be printed one month after the flight takes off, and the printed itinerary can only be printed and issued by the airline, and cannot be reprinted after the expiration date. >>>More

22 answers2024-07-15

The feeling of an airplane taking off and ascending is called weightlessness. After takeoff, the plane does not maintain a fixed angle and attitude, and then climbs to a cruising altitude of 30,000 feet in one breath, but a gradual ascent process. In the early stage of take-off, from a safety perspective (such as the longitudinal spacing requirements of the aircraft, there are birds at low altitude, and the airflow is relatively unstable, etc.). , requiring the departing aircraft to maintain a large ascent rate and climb to a certain altitude as soon as possible. When the aircraft rises to a thrust reduction altitude (about 1000 feet), the flaps will be retracted, the power of the engine will decrease, and the thrust state of the engine will change from take-off thrust to climb thrust, which will be accompanied by weightlessness, but relax because this is normal. After climbing to an increasing altitude (about 3,000 feet), the aircraft enters a process of horizontal acceleration, which reduces the angle of climb, resulting in a slower ascent and a sense of weightlessness. >>>More

16 answers2024-07-15

This is a run-up, because the albatross is too heavy to fly in place, so it has to run a long distance.

16 answers2024-07-15

The side profile of the wing is a shape in which the upper edge is arched upwards and the lower edge is basically straight. Therefore, the air flow blowing through the upper and lower surfaces of the wing and from the front end of the wing to the rear end at the same time will pass through the upper edge faster than the lower edge (because the upper edge has a large arc and a longer arc length, which means that the distance is longer). >>>More