When decorating the home, is it better to paint latex paint or spray?

Personally, I think spraying is better, because the spraying operation is more convenient, and the color will be more uniform.

Spraying, because if the latex paint is sprayed, the color rendering is better, it will be more uniform, and there will be no obvious concave and convex feeling, so the spraying effect is better.

It is better to paint latex paint, because it is not easy to fall off when painted, and it is more beautiful. Also cheap.

Indoor latex paint is good because it makes the color distribution more even, and it can also extend the life of the wall.

I think it's better to spray it, because spraying latex paint can spray latex paint more evenly.

I think it's better to spray it, because it saves time and effort, and it will be more beautiful.

Brushing: Although it is said to be brushing, a large area must be rolled with a roller; Use a brush to arrange the brush, with the aim of evenly closing the latex paint on the wall. However, there are still only brushes in the corners for brushing.

If you do not use the roller coating method to construct the front, and use a brush to brush slowly, the labor cost will be much higher. Advantages: Paint saving.

Answer the latex paint spraying method, it requires a relatively high technical level and equipment, so the cost is high, and some environmental restrictions are not conducive to spraying construction, which is easy to cause decoration damage and is more inconvenient. The roller coating method, because it is manually operated, can save costs, but it needs to be combined with the craftsmanship of workers, so only a very professional construction worker is required.

Then compared with the spraying method and the roller brush method, the spraying method is sprayed out by the spray gun during construction, and it is controlled by the machine, so the paint film will be relatively thin, and several painting processes are required to achieve better results, so it is more expensive to paint. Moreover, it is more troublesome to maintain in the later stage, if there is a local need for maintenance, the painter basically will not bring a bulky spraying machine to repair, and the repair area is small and not suitable for spraying with a machine, so it can only be repaired by the roller coating method, but it is easy to cause a large color difference, which is very ugly.

As far as the finished effect is concerned, if the painting is done well, the smoothness, color uniformity, and uniform coating will be better than the painting, and the painting will still have brush marks in any case, and there may be uneven color due to uneven coating.

The brush is smoother, and the painted latex paint can be better fixed on the wall, and the life will be longer.

I think the latex paint is still sprayed well. Because spraying latex paint will be more even.

The inner wall of the blank is generally not smooth enough, do not scrape the putty powder, the wall will have trachoma and small cracks, and the putty powder is generally scraped 2-4 times after drying and smoothing with sandpaper. Then it's time to start brushing the paint. The primer must be marked with a direct use of cement, which is relatively rare in China, and is generally pure imported from abroad.

This coating itself has a thick bottom nature, which can compensate for the defects of the small cement surface. Then the normal surface cement mortar leveling Brush the interface agent The bottom plaster is leveled Scrape putty twice (laying grid cloth or kraft paper) Wall grinding Primer Painting the surface paint twice The wall of the blank house is almost not very smooth, and it needs to be leveled with gypsum powder or putty powder.

In general, the new house decoration latex paint general wall latex paint needs to be brushed 2 3 times The painting sequence is to brush the top plate first and then brush the wall, the wall is first up and then down, first clean the wall and then wipe off the wall dust with a cloth, latex paint is painted with a row ratio, and there are many positions on the wall and roof that need to be brushed with latex paint in the process of home decoration. Like the living room in most families, the walls of the dining room and the walls of the bedroom study will choose to be painted with latex paint, and the vast majority of families will choose to brush the base of the exterior wall for the roof, and then mix it with double fly powder and cooked rubber powder to make a base.

Then there is the latex paint, and the surface layer needs to be applied 2 to 3 times. Latex paint is divided into primer and topcoat, the primer is the first layer to be brushed up, the main function is to play a sealing, alkali-resistant, enhance the adhesion of the topcoat and save a certain amount of topcoat, etc., the anti-alkali primer has a strong penetration effect, and plays a supporting role in the topcoat. The topcoat is protected from the finished product.

There will be dust when handling the wall, and it is inevitable that putty, paint or other glue will drip off, so be sure to do a good job of protecting the finished decoration in the room in advance.

The spraying method has a good effect on the wall, and the paint film is thin, but it costs the material. There will be brush marks on the roller brush wall, and the paint film is thick, but it can save materials. You can choose according to the details you care about, if it is me, I will pay more attention to the effect of the presentation, after all, the effect is not good, and it is useless to save money.

Brush well, because it is very even, and the brush out is also very good-looking, but the workload is a bit large.

I think the brush is better, because spraying the latex paint will be uneven, and the effect is not very good.

The question of whether it is better to spray paint or paint the latex paint wall, in my opinion, the two methods have their own merits. The key is the technical level of the construction master. If you are a skilled and experienced master, you will get very good results no matter what kind of operation you have.

I have seen a lot of latex paint masters, and the two methods take into account each other's remedy to achieve the best results. The place to spray is sprayed with the method of spraying. The place to brush is the method of brushing.

This makes up for the shortcomings of each method. In the end, the desired effect was obtained, and the latex paint was very beautiful, a must, and impeccable.