Why do you choose small tiles for the tile paving of the bathroom? Aren t big tiles good enough?

Most people will choose to lay small tiles in the bathroom, rather than large tiles, small tiles will make the whole bathroom look more delicate, and the area of the bathroom is not as large as other areas in the house, if you pave large tiles, it will make the whole area look smaller. And I think that laying small tiles can also make the whole bathroom look more sensible, and it will be brighter.

Relevant experts said that paving small tiles can play an anti-slip effect, and there is a lot of water in the bathroom, and it is easy to slip. Then, laying small tiles can also increase friction.

Therefore, it is not easy for everyone to slip in the process of bathing. There will be more gaps in small tiles, while there are fewer blocks in large tiles, and the gaps between blocks are relatively wide, so the whole bathroom is not so non-slip. If some owners prefer large tiles, in fact, the designer will not force everyone to pave small tiles.

Small tiles will indeed look more exquisite, large spaces can be matched with large tiles, and small spaces will be paved with small tiles, so that the whole space will look bigger, like the bedroom with small tiles is indeed more beautiful than large tiles, you can search for a comparison chart on the Internet. Generally, most of the light in the bathroom is not particularly good, so it is also recommended that you can choose to paste beige or white tiles and install more lights, which will also make the whole bathroom look brighter and <>

Many people will also find that the sudden small tiles will be more conducive to the flow of water, so that the water can avoid accumulation on the tiles, causing the entire bathroom to become drenched. All in all, the bathroom is indeed more suitable for small tiles, and sweeping tiles do have a lot of advantages over large tiles, but it mainly depends on how the owner chooses.

Small tiles are more non-slip than large tiles, and it is easy to do slope and is not easy to accumulate water, and the important bathroom space is not large, and small tiles are easy to do modeling can also play a visual effect of increasing the space area.

Now many people in the process of decoration, the bathroom will choose a larger piece of tile, not only beautiful, but also easier to clean, waterproof is also better.

This is because of the fact that it is more beautiful, and large tiles are also better, but they will make the sense of space very cramped.

First of all, it depends on the size of the bathroom, large tiles can be used for larger areas, and small floor tiles are recommended if the area is small.

Why is it not recommended to use large-size tiles, first, the use of large-scale tiles on the wall is more wasteful, and there will be more waste materials if the size is small, which wastes the cost of decoration; Second, the use of large specifications on the ground may lead to the difficulty of controlling the slope of the bricklayer's flowing water, and it is also wasteful and not cost-effective.

1. Because the bathroom is a place that is easy to be soiled, we will naturally think about laying small tiles when laying tiles, and there will be many gaps, which will easily hide dirt and dirt, and it is difficult to clean.

Second, if you choose a large size of the tile, so that it will be more convenient to clean, but it needs to be taken into account that the space of our bathroom is generally not large, even if the space is relatively large, it is not recommended to use tiles with too large specifications, because the corner of the bathroom is more, the frequency of tile cutting will be too large, the waste is relatively large, and it is inconvenient to install floor drains, and it is inconvenient to level the ground, which is easy to cause waste, so it is recommended to use small size tiles (except mosaics).

Because the bathroom is a place that is easy to be dirty, so we will naturally think about laying small tiles when laying tiles, there will be a lot of gaps, it is easy to hide dirt and dirt, it is difficult to clean, if you choose a large size of tiles, so that it will be more convenient to clean, but have you taken into account that the space of our bathroom is generally not large, even if the space is relatively large, it is not recommended to use tiles with too large specifications, because the corners of the bathroom are more, and the frequency of cutting tiles that are too large will be high. The waste is relatively large, and it is inconvenient to install floor drains, and it is inconvenient to level the ground, which is easy to cause waste, so it is recommended to use small tiles (except mosaics).

Because the bathroom itself is relatively small, the tiles of large size are easy to fall off.

It is more cost-effective to use large floor tiles.

This question examines the area of rectangles and squares, and the specific solution ideas are as follows:

1. According to the rectangular area formula, the area of the bathroom can be found to be 4 2 = 8 square meters, 8 square meters = 800 square decimeters.

2. According to the square area formula, it can be found that the area of large floor tiles is 4 4 = 16 square decimeters, and the area of small floor tiles is 2 2 = 4 square decimeters. 3. Then divide the area of the bathroom by the area of the large and small limb floor tiles to calculate the number of large and small floor tiles: that is, the large floor tiles need 800 16 = 50, and the small floor tiles need 800 4 = 200.

4. According to the formula of ** = unit price quantity, calculate how much money is needed for large and small floor tiles, that is, 50 16 = 800 yuan for large tiles, and 200 5 = 1000 yuan for small floor tiles. Finally, compare the total price of large and small floor tiles respectively, that is, 1000>800, so it is cost-effective to use large tiles.

No matter how big or small, it should be non-slip.

There are many places where tiles are used at home, and the tiles in the living room need to look at the actual pattern and brick laying to determine the size, and the same can not be arbitrary. Like the bathroom is more complicated, the general default bathroom floor 300 * 300 floor tiles, why not pave a little bigger? Because the bathroom has a slope, you can't use large bricks, otherwise the slope can't come out, and the tiles can't be paved if the slope is large; Another is that the bathroom is generally small, and all the large tiles are cut, and there may be more corners, but the waste of materials is not good-looking.

The first type: there is no partition, and small bricks are laid throughout.

The area is relatively small, and the ground must be 300*300 small size floor tiles, which needs to be left with the overall slope and determined by objective conditions; As for the wall, there are not so many restrictions, as long as the area is in line with the size of the tile.

The second type: dry and wet partitions, large on the outside and small on the inside.

Like this complete bathroom cabinet outside the dry and wet separation, the practice is different, because the outside is integrated with the public area of the corridor, for visual enlargement, the dry area and the public area can be directly paved with large bricks. In the wet area, small tiles are needed to meet the slope requirements.

The third type: there is no embedded water retaining strip.

As shown in the figure, a word shower partition is made, because there is no pre-embedded water retention, the ground must be paved with small tiles, and the slope can only be a main slope, that is, if there are several floor drains on the ground, the shower floor drain must be used as the main target point to slope inclination.

Fourth: a word shower embedded water retaining strip.

As shown in the figure, it should be noted that the ground outside is a long strip of 300*600 floor tiles, and the shower is another ground material, because after the embedded water retaining strip, there is no open water outside after the partition, so there is no need for too much slope, or even no slope, so that the water retaining strip partition can be pre-embedded, and the large size tiles are realized outside, and the shower is made in a separate space. If you don't pre-embed the water retaining strip, but the later stage of the tile on the head of the drow, can not do a thorough partition, you need an overall slope, large-size tiles can not be realized.

To sum up, if you have a very small bathroom and want different specifications of tiles on the ground, the first is to do the shower partition partition, and the second must be embedded with a water retaining strip, so that the shower outside the area can use large-size tiles, no slope at all, when there is water, it is actually mopping the floor, and there is no need for slope assistance. If your bathroom does not have any partitions, and less than 4 square meters, you can honestly use 300 * 300 floor tiles, if it is more than 4 square meters, you can use 400 * 400 floor tiles, don't think about anything else.

Suggestion: If you have an experienced construction team or are willing to hire a professional renovation company to carry out the construction, you can consider choosing large tiles for greater visual effect and sense of space. If you have a limited budget or the construction conditions are relatively simple, small tiles are a more practical and convenient option.

Visual ComparisonThe bathroom is a functional space, and its visual effect is also an important aspect that we need to pay attention to during the renovation process. Large tiles are able to visually create a more spacious and tidy feeling due to their larger size. Especially for small bathrooms, choosing large tiles can make their space appear more open and comfortable.

In addition, large tiles can also visually reduce the number of gaps, making the overall decoration effect more uniform and beautiful. In contrast, small tiles require more gaps to connect due to their smaller sizes, which can appear a bit cluttered visually. Therefore, if you are looking for a minimalist and neat decoration style, large tiles may be more in line with your needs.

However, the choice of tile specifications is not limited to visual considerations, but also the overall design style and personal preferences of the bathroom. Some people may prefer the delicate and sophisticated touch that comes with small tiles, especially in the pursuit of retro or traditional style bathroom decoration. Small tiles can create more patterns and patterns, making the bathroom more personal and artistic.

In addition, small tiles are more diverse in the choice of colors and textures. You can choose small tiles in different colors and textures according to your preferences to create a unique and personalized bathroom decoration effect. Large tiles, on the other hand, may have relatively limited choice of colors and textures due to their larger specifications.