What should I prepare in advance for dry and wet separation in the bathroom?

1.The separation of dry and wet in the bathroom is mainly to effectively separate the shower area from other areas, and a shower room can be designed in the bathroom. When the ground is gronoted, the water will be drained from all sides during bathing, and it is not easy to accumulate water.

At the same time, by setting up shower rooms, some are curved and some are diamond-shaped, so the water is not easy to splash out when taking a bath. It looks good, and it doesn't need to take up a lot of space, we can choose customized products according to the size of the indoor space, and the specifications and sizes can be designed later, which can effectively form dry and wet separation.

2.In addition, you can also make a partition wall in the bathroom. If you have a glass shower room at home, you can use glass partition walls.

For added privacy, frosted glass can be used again, which acts as an insulating effect. Some glass partitions will not block the view, and will visually feel more empty, which can form a better dry and wet separation effect. Waterproofing in the bathroom is very important because there is a lot of water, especially when taking a bath, there is water on the floor.

If the waterproofing is not in place, it is easy for the downstairs to leak, which will not only cause trouble for your own family, but also affect the relationship between neighbors. The shower room is currently the most popular dry and wet separation bathroom interior decoration design, and the water generated by the bath will not splash out, and it is more convenient to clean up.

3.In winter, bathing in it has a certain safety factor and warmth, and when the road is wet and cold, the service life of toilet supplies is greatly increased. Use a shower curtain to separate dry and wet, and install a slide rail on it.

Convenient and hygienic without jeopardizing ventilation and lighting. Best of all, very good deals. As a wet and cold area where the toilet has been used for a long time, it is necessary to do a good job of waterproofing.

The height of the walls on both sides of the shower room should be more than meters, the height of the sink should be more than meters, and the road surface should be fully waterproof. For larger bathrooms, wall partitions can be used to separate dry and wet. This wall can be laid with mosaic tiles of various colors and patterns, which has the advantages of non-slip and easy scrubbing, and also adds color to the bathroom and plays an aesthetic role.

4.If the toilet is not well drained, it is easy to cause the bathroom to be damp, cold, greasy, and even endanger the physical and mental health of the family. Try to set up deodorizing floor drains in dry and wet areas, so that the drainage can be smoother.

Wood-based panel separators are usually phenolic resin high-pressure panels with a thickness of 12 or 18 mm, which are moisture-resistant, anti-collision, dirt-resistant, and easy to clean. However, the cost is relatively high, suitable for humid or dry, high temperature environments, and the fire rating is relatively high. It is the best material for sanitary partitions.

Be sure to plan the design style in advance, you can do dry and wet separation by partition, you can also install a shower room, you can also separate the bathing and washing area, you can buy waterproof curtains, you can buy explosion-proof glass, you can create a window when doing dry and wet separation, you must seek the help of professional decoration team workers.

You should prepare some seals in advance, you can also prepare a bath bucket or prepare a sliding door in advance, so that you can do a good job of dry and wet separation, and we will not leave the bath water, and the bathroom is everywhere.

It is necessary to do a good job in the planning of the space in advance, be sure to do a good job of laying the pipeline in advance, pay attention to the problem of sewerage, so that the dry and wet separation can be better carried out, and the problem of lighting must be paid attention to.

The bathroom does not have to do dry and wet separation, dry and wet separation is just a design concept, which is more tidy and more efficient than the traditional bathroom design. However, the problem of dry and wet separation is that the area demand is large, and the bathroom of a small apartment has no space to do dry and wet separation, so dry and wet separation is only an option, whether to do it or according to your own needs.

Advantages and disadvantages of dry and wet separation in the bathroom Advantages of dry and wet separation:

1. Higher safety, will not slip due to splashing on the floor and stagnant water, and some electrical appliances in the bathroom space can also reduce the damage of water vapor to its corrosion, and reduce the probability of accidents such as leakage.

2. Improve the efficiency of the bathroom, with a separate bathing table, we will not have the conflict between the bathroom and washing, especially the people who have a large number of people, with such a layout can make the ** separated, so it is very convenient to use the Buhui Bureau.

3. Increase the life of the equipment, only the seriously unqualified or aging floor tiles will appear to return to alkali under the long-term immersion of water, and the moist air will play a certain role in the maintenance of the tiles. The real susceptibility to moisture is the washing machine and the wooden cabinet in the pre-sanitary room. Because the water vapor will corrode the motor of the washing machine, causing it to rust and shorten the service life, the wooden cabinet will be deformed due to moisture.

Disadvantages of wet and dry separation:

1. The cost is high, and although the separation of dry and wet is good, it is not suitable for any house type. To be precise, it is generally only suitable for the current new house, and it is a relatively large house. Even if some old houses can be renovated, the project is more troublesome and the cost is quite high.

2. The area is large, the requirements for the area of dry and wet separation are still very large, at least the bathroom and the outside bathing table can have an area of 8 square meters, otherwise it is very crowded to do it, usually the handwashing station and the toilet are separated, there will be an additional wall or an extra layer of doors, not only that, we isolate the bathroom and the bathroom is basically a separate cost billing, plus some decorative components, so the cost will be relatively high.

1. The foundation waterproof project is in place.

The most important thing for the separation of dry and wet in the bathroom is to put the basic waterproof project in place, so as to play the role of dry and wet separation. When laying bathroom tiles, the foundation of the waterproof coating should be done, and the next step can only be carried out after the waterproof test is disturbed, as for the choice of waterproof coating, it is best to choose a well-known paint brand, and the construction process can not be careless.

2. Separate functional areas.

The separation of the functional area is according to the characteristics of the dry and wet area of the air resistance Zen Dan division, most of the moisture in the bathroom comes from the shower area, which will not only make the surrounding space more humid, but also affect the use of other areas, so it is necessary to separate an independent shower room. If the bathroom at home is relatively large, you can design a separate bathroom and then design the sink outside the bathroom.

3. Set up an independent bathing room with silver.

At present, the most common design method of dry and wet separation in the bathroom is to set up an independent shower room, that is, to divide a part of the area in the bathroom as a shower room, and then divide the area with a glass door to prevent the steam generated during the bathing process from spreading to other areas. However, the walls of the isolated shower room must be tiled to prevent steam from penetrating into the wall and causing damage.

4. Separation of dry and wet in a small area bathroom.

Now there are a lot of small apartments or single apartments in big cities, and it is not enough to set up an independent shower room space, in this case, you can open up the bathroom and bedroom, and then set up an independent shower room, and then use the glass door as a partition of the space, so that not only can make full use of the space, but also is more convenient to use.

The bathroom should be separated from wet and dry. Bathroom wet and dry separation refers to separating the bathroom shower area from the dry area. It can block water vapor, keep the shower area dry, and reduce our cleaning pressure; It is also possible to avoid the fact that the bathroom is full of water and people are easy to slip, which improves the safety performance to a certain extent; Separation of wet and dry in the bathroom can also avoid the diffusion of hot air, and the warmth effect will be better.

There are many ways to separate dry and wet in the bathroom, and usually we can do some good-looking modeling with a certain decorative effect.

But not any house is suitable for dry and wet separation, usually dry and wet separation is to use a wall or a door to separate the shower area and the toilet, sink, if the bathroom area is too small, for example, not more than the square, do dry and wet separation will appear that the bathroom is very crowded. In addition, the cost of separating dry and wet in the bathroom will be relatively large.

There are also many ways to do dry and wet separation in the bathroom, for example, we can use waterproof shower curtain and water strip to do dry and wet separation, this method is simple and affordable, and the decorative effect is also good; You can also install a glass shower room for dry and wet separation, the glass shower room can create a relatively independent space, and its shape is diverse, and the decoration performance is good. However, the flexibility of the glass shower room is poor, and it is relatively higher.

Why should the bathroom be separated from dry and wet 1 to improve the efficiency of life.

Dry and wet separation toilets can improve the efficiency of family life. In particular, the effect is more obvious for families with small bathroom area and large population. For example, when the family gets up in the morning, the family rushes to the toilet, and if the mode of dry and wet separation is made, the toilet and washbasin area can be carried out at the same time, which greatly improves the efficiency of the toilet.

2. Easy to clean.

Separating the dry area from the wet area can keep the dry area tidy, because the floor of the dry area has not been moistened by water vapor for a long time, the dirt in the tile gaps can be cleaned as long as it is gently scrubbed, and it is easier to do hygiene.

3.Increase the life of your equipment.

If the bathroom does not separate dry and wet, it is not recommended to place items such as washing machines and wooden cabinets in the bathroom, because water vapor will corrode them, thus shortening the service life; The wooden cabinet will also be corroded and deformed due to moisture, especially the master bedroom with a bathroom, so it is necessary to pay more attention to it, which is likely to further harm the bedroom furniture.

Socio-economic development is getting faster and faster, and people have higher and higher requirements for their quality of lifeTherefore, if conditions permit, the bathroom must be separated from dry and wetIn this way, we can make our lives better, I hope everyone can realize this, dry and wet separation can not only keep the bathing site dry and hygienic, but also maintain the overall environment of the bathroom clean and beautiful, it is also a very big benefit, I hope everyone can look at this rationally.

1. What are the advantages of wet and dry separation?

We all know that the bathroom with dry and wet separation will be safer, and will not cause the accident of slipping and falling due to water splashing, especially for families with small babies at home, if you can do a dry and wet separation, you can also better protect the baby's health, and at the same time, dry and wet separation can also increase the usable area of the bathroom, and concentrate the water vapor in other places in the local area will not affect the use, and can also provide us with great convenience, for some indoor appliances, It can also better maintain the life of the equipment, which still has great benefits.

2. What are the disadvantages of wet and dry separation?

There is no practical disadvantage of dry and wet separation, but compared with the traditional bathroom decoration, the cost will be higher, I hope everyone can look at this matter rationally, and at the same time there are higher requirements for the choice of decoration area, generally speaking, the place required will be larger than the traditional bathroom.

3. What should be done before the dry and wet separation.

We all know that the living habits of each family are different, so we should respect the suggestions of each family member before decorating, flexibility is the only way that we can better achieve the purpose of comfort, and we need to pay attention to the problem of dry and wet separation, in fact, do not be too entangled.

When the bathroom is decorated, it is often mentioned that it should be separated from dry and wet, but does the bathroom really have to be separated from dry and wet? On this point, I feel that it is very necessary for the following reasons:

First of all, the bathroom is a place where we usually use more water, and if we are not careful, it will cause water splashing and water vapor in the house, especially if there are elderly and children at home, if we accidentally slip, it will cause certain loss, even if it is a non-slip floor tile, it may not be able to ensure complete safety.

Secondly, being in a humid environment for a long time can breed bacteria, and our toiletries are often placed in such an environment, which is not very good for our body.

Finally, if it is a wooden sink or a wooden shower cabinet, staying in such an environment all the time will not only greatly reduce its service life, but also mold and deformation are doomed.

Therefore, no matter how small the bathroom is, it is best to do a good job of dry and wet separation, and there are many ways to separate dry and wet, according to the situation of your own home, it is best to design a bathroom that suits your own situation.

Benefits of doing wet and dry separation in the bathroom:

1. Dry and wet separation can effectively protect the cabinets and electrical appliances in the bathroom and prolong their service life.

2. Dry and wet separation can meet the needs of multiple people at the same time, and the family will not have conflicts because of the toilet and washing during the peak period of work.

3. The separation of dry and wet can well control the water of the shower in the wet area, so as to ensure the dryness of the dry area, avoid dampness and bacterial breeding, and make the bathroom more clean and tidy.

4. Generally speaking, the shower room occupies a small area and is easy to install, which can make the layout of the space more reasonable and improve the overall aesthetics while meeting the functional needs of the bathroom.