How to remove the aluminum cake that is glued to the tempered glass 20

Put glued to tempered glass.

How to remove the aluminum cake on it:

1. First, clamp the part of the glass and the aluminum cake together with a pipe wrench.

2. Turn on the switch of the gas stove, use a low heat in the middle, put the bottom of the aluminum cake close to the fire source, and burn for about 3 minutes.

3. Remove from the fire source, tap the tempered glass with a hammer until the others are separated from the aluminum cake.

Soak in water at room temperature. Put a basin of water under the glass plate, soak **soft, and then slowly uncover**. However, this method does not guarantee 100% integrity.

Use the steam of the electric iron to infiltrate the ** little by little, let the ** moisten, and then use the blade to raise the corners of the edges. This method is based on the same principle as blistering, but of course carries the same risks.

The safest and easiest way is to remake ** through the glass plate.

Soak in tap water for more than 2 hours, the color will fade, and it will recover after natural air drying, but it must not be exposed to the sun.

Instead of water soaking** and glass, the "hypo" (also known as baking soda or sodium thiosulfate, a fixer on photography) can be diluted with water.

Put the glass and photos in the refrigerator to freeze, and then take them out after freezing, the water vapor in the air will liquefy when it encounters low temperatures**and the glass**, **will be damp, and you can take it off smoothly at this time.

Blow on the surface of the glass with a hair dryer for a minute, and you will find that the place where the ** and the glass were originally stuck together will slowly begin to peel off due to thermal expansion, and then ** and the glass will naturally separate. But as the temperature increases, there is a risk of glass breaking.

Candles or hair dryers or other heat sources heat the aluminum cake and gently hit it with a hammer after 5 minutes, and the aluminum cake can fall off on its own.

Summary. Hello kiss Glad to serve you, through the listing of the house query shows that the way to remove the aluminum cake stuck to the tempered glass is to <>

1. First, clamp the part of the glass and the aluminum cake together with a pipe wrench 2. Turn on the gas stove switch, use a small fire in the middle, put the bottom of the aluminum cake close to the fire source, and burn for about 3 minutes <>

3. Remove from the fire source, tap the tempered glass with a hammer, and separate it from the aluminum cake.

How can I remove the aluminum cake that is stuck to the tempered glass?

Hello kiss Glad to serve you, through the listing of the house query shows that the way to remove the aluminum cake stuck to the tempered glass is to <>

1. Bei Tan Hui first clamped the part of the glass and the aluminum cake together with a pipe wrench 2. Turn on the gas stove switch, use a small fire in the middle, put the bottom of the aluminum cake close to the fire source, and burn for about 3 minutes <>

3. Remove from the fire source, tap the tempered glass with a hammer, and then separate from the aluminum cake to the other, and be sure to pay attention to safety!

Kiss <>

Tempered glass belongs to safety glass. Tempered glass is actually a kind of prestressed glass, <>

In order to improve the strength of glass orange glass, chemical or physical methods are usually used to form compressive stress on the surface of the glass, and the glass should first offset the surface layer when bearing external force, so as to improve the bearing capacity and enhance the wind pressure resistance, cold and heat resistance, impact and so on. Pay attention to the difference from glass car steel, yo pro-<>