-
Hello, the blue screen of computer boot is mainly caused by: "There is an error in the memory" or "abnormal shutdown"!
1。Try to boot the computer, after the computer brand is out, press F8, press Enter, Enter, enter the safe mode, and start advanced.
options, the last correct configuration, Enter, Enter, press to try! [Critical step].
2。No more, enter the safe mode, press enter, and after going to the desktop, antivirus software, full antivirus!
Quarantine" stuff, completely removed!
3。Reuse: 360 Security Guard, "Trojan Horse Killing": "360 System First Aid Kit", System Repair, Select All, Fix Now! [Critical step].
Network Repair, Start Fixing!
360 Security Guard, Scan Plugins, Clean Now! 360 Security Guard, System Repair, One-click Repair!
Again: Start First Aid! After restarting, click on the "File Recovery Area" and select all to completely delete the files!
4。If you can't do it again, unplug the graphics card and memory module, erase it, use a brush again, clean the slot dust and fan, replace the memory slot, etc.! [Desktop].
etc., uninstall the redundant, and only leave one, because similar software is not compatible with each other! [Critical step].
7。If you still can't turn it on, you need to "one-click restore" or "reinstall the system"!
8。If there is a problem with the hardware, send it for repair!
-
The easiest way to do this is to reinstall the system. Or plug the memory back in.
-
Only steps 4 and 8 on the 2nd floor are recommended.
-
The blue screen is caused by a driver or system service program that conflicts with the system.
1. It is recommended to press F8 when the power is turned on, release the F8 key when the advanced menu appears, and select the latest correct configuration (Advanced).
2. If you can't get in, you can only reinstall the operating system.
3. If the blue screen is still after reinstalling the system, the hardware problem will be considered. First of all, clean the dust in the computer thoroughly, remove the equipment on the memory, graphics card, and PCI slot, and clean the gold finger.
-
Two cases:
a. There is a problem with the system disk or ghost file. Swapped out.
b. Hard disk failure.
Bad sectors on the hard disk have been detected and cannot be repaired, so you need to block them.
1. The U disk boots into PE, and uses DiskGenius to check the hard disk.
Key mechanical discs. The main detection has bad sectors! (Determine whether it is a physical bad sector)1DG scans partitions, repairs bad sectors, and can still be used;
2.On further observation, will it become a bad track again (including nearby tracks)?
If it is not a bad road, it is a non-physical bad road. It works.
3.It also becomes a bad road, which belongs to the physical bad road. They are processed in the following order.
Second, if there are a large number of bad sectors detected, basically the hard disk is scrapped! Not usable.
Otherwise, the system fails, and it is very easy to damage the host.
3. If the number of bad sectors is small and concentrated, divide the bad sectors (larger) into a partition
Don't format! Don't do it in the future! The rest of the partitions are created without bad sectors.
Fourth, make a system partition according to the normal and install the system (it is not necessary to use SSD);
The partition is divided into two or three data disks. It can also be used. But try not to put the main data.
Helpful: Like! Adopt! is a person with character.
-
First, when you are in safe mode (restart, press the F8 key at startup, and select "Safe Mode") to see if the blue screen appears. If the blue screen does not appear, it can be inferred that the cause of the incident is that the driver software is expired and the third-party program is interfering.
If the problem is not resolved, there is a possibility that a software conflict is causing the blue screen. You can use a 'clean boot' to troubleshoot, identify the problematic software, and then consider a solution.
2.If the blue screen is still in safe mode, the problem may be due to unstable hardware. Here are some general steps you can try to troubleshoot hardware blue screens:
1.If you have recently replaced the hardware, please replace the new hardware back to the previous hardware or other new hardware.
2.If you have more than one memory module, please keep only one and remove the rest.
3.Confirm whether the wiring is loose and whether there is too much dust burning in the chassis, and fix and clean it.
4.Replace it with a different power supply.
-
Hello landlord, you can envy the installation and use of Tencent Computer Manager to talk about the health assistant without the boy function, intimate care for every second; The new three-core engine kills stubborn Trojans, and its capabilities are fully upgraded; 3G wireless Internet traffic statistics, clearly showing 3G data consumption; The web firewall capability is enhanced to protect non-IE kernel browsers.
Add a software butler to centrally manage various programs on the computer; The software supports sorting methods according to time, popularity, and rating; Icons are added to the software repository to optimize the user experience.
System BSOD issue caused by memory incompatibility! It is recommended that the landlord check what kind of memory model his machine is suitable for, and then buy the corresponding memory.
There is a serious error in the system, as if it is a hardware issue.
Blue Screen: The reason for 0xc000000a blue screen error is because the specified module cannot be found. >>>More
The memory is hard, and the system is all problematic.
Memory. Or hard drive, less likely to be a system problem.